Ok, OVS can be used as a complete drop in replacement for Linux Bridges (LB) but it seems that /etc/network/interfaces must be modified to completely remove the Linux Bridge configuration and then configured to bind OVS Bridges to physical...
We recently uploaded the 7.0 (rc6) kernel to our repositories. The current default kernel for the Proxmox VE 9 series is still 6.17, but 7.0 is now an option.
We plan to use the 7.0 kernel as the new default for the upcoming Proxmox VE 9.2 and...
@alexskysilk Thank you.
The 7.0 kernels seem to be the supported ones for Proxmox now, and that's what my machines are running. Just thought it strange that a kernel previous to the one I operating was updated.
Hi all,
Curious if anyone has run into an issue where PBS 3.x runs fine on a Dell NX3230 but a fresh install of 4.x or upgrade won't fully boot past the 'Loading Linux 7.0.0-3-pve | Loading intial ramdisk..' screen. After the automatic reboot...
@tcnewone vielen Dank für den Hinweis. Ich hatte allerdings die Hoffnung, dass das mittlerweile schon besser gelöst sei (z.B, per GUI, oder wenigstens ein Synch zwischen den Nodes, auch für die Datenbank, stattfindet).
Kommt darauf an, generell sollte man keine Wunder erwarten, weil man RAM nicht wirklich überprovosionieren kann, siehe hierzu folgenden Post von dunuin: https://forum.proxmox.com/threads/ramverbrauch-bleibt-konstant.107279/#post-461391
Bei VMs wo...
Gar nicht, da der PBS alle neuen Blöcke auch als neue wegschreibt, bleiben die alten Backups ja heile.
Das Monitoring sollte aber schon anspringen wenn zu viele Dateien geändert werden.
Feature Requests dazu gibt's garantiert schon, also dich am besten an einen bestehenden anhängen und deine Informationen dazu teilen. Um so mehr Feedback ein Feature Request hat, um so höhere Prio hat der.
Ich weiß aber auch, das bereit länger...
We're pleased to announce the release of Proxmox Backup Server 4.2.
This version is based on Debian 13.4 ("Trixie"), uses Linux kernel 7.0 as the new stable default for improved hardware support, and comes with ZFS 2.4 for reliable...
Gar nicht, da der PBS alle neuen Blöcke auch als neue wegschreibt, bleiben die alten Backups ja heile.
Das Monitoring sollte aber schon anspringen wenn zu viele Dateien geändert werden.
Das bitte nicht tun, die Abgespeckten Controller für die OS NVMe laufen nur richtig rund, wenn die brav ihr Raid1 behalten.
Dann einfach den PVE mit ext4 darauf installieren, das funktioniert immer wunderbar.
"kernel" being "out" doesnt mean anything directly to a distribution with a support policy. Instead, the maintainers of your linux distribution (in this case, ubuntu) will backport important changes that are deployed to downstream kernels...
Thanks for the help so far, I will give this a go, so first change the bus to scsi or virtIO (which would you recommend?)
Also can this break anything? It’s on a web server hosting data for people, or is it as simple as shutting the vm down...
Ich habe so ziemlich alle early OOM killer ausprobiert und bin am Ende nun bei der Kernel eigenen min_ttl_ms Option gelandet.
@reboot echo 1 > /sys/kernel/mm/lru_gen/enabled; echo 1000 > /sys/kernel/mm/lru_gen/min_ttl_ms
Ich verstehe nicht zu...
I am having these same issues. I installed ceph but can't get the monitor to work. First was the DNS SRV and now I am getting could not connect to ceph cluster despite configured monitors (500). I already started all over once.
It seems like...