I just want to add, if you have (in the future) any sort of tool (e.g. memtest) that only supports BIOS boot, keep that in mind if it rejects to boot. Your firmware most likely goes by the fact that it found BIOS boot partition on the PVE...
I reproduce migration VM from nodes....
first I create VM on node3 with OS windows 10, then I destroy Vm on node3 and create new Vm on node1 with linux OS.
I migrate new vm (with linux) from node1 to node3
in log i see:
2026-04-29 15:43:16...
We're pleased to announce the release of Proxmox Backup Server 4.2.
This version is based on Debian 13.4 ("Trixie"), uses Linux kernel 7.0 as the new stable default for improved hardware support, and comes with ZFS 2.4 for reliable...
Ich stelle mir folgende Fragen:
Hast du ein LTO10-Laufwerk?
Warum nutzt du nicht den internen rsync-Dienst von OMV?
Wieviele TB sind Bewegungsdaten?
Sind es vorwiegend große Dateien?
Wie gut komprimierbar sind die Daten?
Eine Lösung, die...
Wenn du schon eine extra Kiste mit Bandlaufwerk hast, wären evtl. auch die Community Lösungen von SEP SESAM, Bacula oder Bareos interessant - die können meines Wissens alle Backup-Disk-to Tape und laufen unter Linux-OS.
We're pleased to announce the release of Proxmox Backup Server 4.2.
This version is based on Debian 13.4 ("Trixie"), uses Linux kernel 7.0 as the new stable default for improved hardware support, and comes with ZFS 2.4 for reliable...
Ich glaube, es gibt noch gar keine LTO-10 Laufwerke, bislang habe ich nur Tapes gesehen. Also nein, kein LTO-10 Laufwerk! ;-)
rsync nutze ich zwischen den beiden OMVs.
Bewegungsdaten zwischen 100 Gb und 1 TB in der Woche. Eher kleine Dateien...
See: https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysboot_kernel_pin
by "pinning" the kernel with proxmox-boot-tool - you tell the boot-loader which kernel to boot, you can then install/upgrade the packages, and the pinned kernel would...
@blueman wie sieht denn dein ZFS Pool aus?
zpool status
zpool list -v
Bei HDDs Ich hoffe 7.200 RPM NAS Drives mit CMR Speichermethode.
Evtl. ein Rad10 ähnliches Setup mit 4x HDDs?
Wurde dem ZFS Pool noch SSDs als ZFS Special Device mit mind...
Problem wird für dich sein, dass Du kein Proxmox BS rein NVMe 3.0/4.0 aus N Datenspeichern hast.
So wird der PBS mit reinen ZFS VDev 2x HDDs ca. 80 MB/s read/write liefern.
Beim Rücksichern wird das noch weniger sein können.
Hello, @LeFred
Seems like you can use a method similar to one described at
https://chase-seibert.github.io/blog/2005/10/19/postifx-header-based-routing.html
"First, enable header checks in /etc/postfix/main.cf:
header_checks =...
Hello, @LeFred
Seems like you can use a method similar to one described at
https://chase-seibert.github.io/blog/2005/10/19/postifx-header-based-routing.html
"First, enable header checks in /etc/postfix/main.cf:
header_checks =...
Hi!
both are reasonable suggestions, we've talked about the auto-cost parameter in the past. I'll rebase the first series, so hopefully we'll get it in for the next release.
For the auto-cost parameter please create a feature-request on our...
I think we can chalk this up to a rookie mistake - further testing reveals we get the same performance-hit if pre-filling the disk/image using fio before running performance tests. In other words the issue is that updates/overwrites performs...
I’m encountering an issue with ACME certificate issuance via DNS API using Yandex 360 in the following stack:
Proxmox Backup Server: 4.1.x (tested on 4.1.1, 4.1.5, 4.1.10)
Proxmox VE: 8.4+ and 9.1+
Datacenter Manager: 1.0.3
The problem occurs...