Latest activity

What's new Featured content New posts New profile posts Latest activity
  • bbgeek17
    bbgeek17 replied to the thread [SOLVED] 2 Nodes and ISCSI Storage.
    Hi Stefan, the most likely reason is that the 2nd server is not configured properly in one way or the other. However, that is based only on your brief report. If you provide some system information from both servers, perhaps a better suggestion...
  • J
    jricktxx replied to the thread [SOLVED] VM Creation / HA / Permissions.
    Is there an estimated timeline for a fix? Our team is also experiencing this issue.
  • T
    tippers reacted to fba's post in the thread Change QDevice to Raspberry Pi 2 failing with Like Like.
    The ssh server accepts only password based authentication it seems. Check that /etc/ssh/sshd_config has PubkeyAuthentication yes set.
  • J
    Johannes S reacted to fba's post in the thread Change QDevice to Raspberry Pi 2 failing with Like Like.
    The ssh server accepts only password based authentication it seems. Check that /etc/ssh/sshd_config has PubkeyAuthentication yes set.
  • J
    Johannes S reacted to tippers's post in the thread Change QDevice to Raspberry Pi 2 failing with Like Like.
    Perfect, thank you for your help - it's now allowing me to replace the Qdevice in the cluster :)
  • T
    tippers replied to the thread Change QDevice to Raspberry Pi 2 failing.
    Perfect, thank you for your help - it's now allowing me to replace the Qdevice in the cluster :)
  • J
    Johannes S reacted to GMBauer's post in the thread [SOLVED] pve 9.1.1, Client im Bootloop with Like Like.
    Aus diesen Angaben kann eigentlich noch kein Mensch rauslesen, was auf deiner VM ist. Der "Server" ist ein i5-4570, also ein ausgelutschter PC, den du für Proxmox verwenden willst. (Geht, kein Problem...) Mit "Client" meinst du den Rechner, mit...
  • G
    GMBauer replied to the thread [SOLVED] pve 9.1.1, Client im Bootloop.
    Aus diesen Angaben kann eigentlich noch kein Mensch rauslesen, was auf deiner VM ist. Der "Server" ist ein i5-4570, also ein ausgelutschter PC, den du für Proxmox verwenden willst. (Geht, kein Problem...) Mit "Client" meinst du den Rechner, mit...
  • A
    ASM-Network replied to the thread [SOLVED] 2 Nodes and ISCSI Storage.
    We made some changes and set up multipath according to your documentation. The first server creates the mpath0 device, but the second server doesn't. Rebooting didn't help. Do you have any ideas? BR Stefan
  • G
    GMBauer replied to the thread [SOLVED] Proxmox startet immer wieder neu.
    Zu thin ist auch nichts. Wenn das Ding ein echter ThinClient mit 2 Cores oder so ist, gib das Teil zurück. Sinnvoll einsetzbar sind m.E. Mini-Desktops erst ab 4 Kerne plus HT oder so. Vielleicht kann man das Ding noch als PBS einsetzen, aber mehr...
  • cheiss
    cheiss replied to the thread [SOLVED] pve 9.1.1, Client im Bootloop.
    Die Bootdisk ist anscheinend (noch) nicht an einen Bus angehängt. Im Hardware Tab die unused0 Disk auswählen, Edit klicken und dann bei Bus/Device zB Virtio Block auswählen bzw. je nach Gast ensprechend. Dann sollte die Disk auch im...
  • G
    GMBauer replied to the thread [SOLVED] Proxmox startet immer wieder neu.
    Vor einer Proxmox-Installation schadet ein Laden der BIOS-Grundeinstellung nie. Ich würde der Reihe nach das testen, was "einfach" geht: Netzwerkkarte deaktivieren und stattdessen USB-Dingsel nutzen SSD tauschen Lüfter (CPU-temperatur) und RAM...
  • J
    Johannes S reacted to aaron's post in the thread [SOLVED] 2 node cluster - ansicht in webgui with Like Like.
    Wenn die Storages auf den Nodes unterschiedlich sind, musst du das entsprechend markieren auf welchen Nodes diese verfügbar sind. Wenn du ein Storage bearbeitest oben rechts die Nodes auswählen. Per Default sind alle Storages für alle Nodes...
  • S
    Stefan Karg reacted to bluesite's post in the thread [SOLVED] pve 9.1.1, Client im Bootloop with Like Like.
    ich sehe da gar keine Disk von dem die VM booten soll, poste doch mal deine vm Konfig
  • S
    Stefan Karg replied to the thread [SOLVED] pve 9.1.1, Client im Bootloop.
    boot: order=ide2;net0 cores: 2 cpu: x86-64-v2-AES ide2: none,media=cdrom memory: 18000 meta: creation-qemu=10.1.2,ctime=1776697998 name: TestOVA net0: virtio=BC:24:11:E1:50:42,bridge=vmbr0,firewall=1 numa: 0 ostype: l26 scsihw: virtio-scsi-single...
  • M
    mrmdemic reacted to Onslow's post in the thread Clean install Connection error - not loading WEB GUI with Like Like.
    I understand. Still, it doesn't make you safe. Every few weeks there are news described another successful backdoor attack. Also in software used by thousands or millions of people. A notable example is https://en.wikipedia.org/wiki/XZ_Utils_backdoor
  • O
    Onslow replied to the thread Clean install Connection error - not loading WEB GUI.
    I understand. Still, it doesn't make you safe. Every few weeks there are news described another successful backdoor attack. Also in software used by thousands or millions of people. A notable example is https://en.wikipedia.org/wiki/XZ_Utils_backdoor
  • G
    GMBauer replied to the thread [SOLVED] pve 9.1.1, Client im Bootloop.
    Booten von einem leeren CD-ROM-Laufwerk funktioniert fast nie... Ist sogar ohne Virtualisierung so.
  • O
    Onslow replied to the thread Can't find PVE 9 Changelog.
    @fbassas I'll give here a broader hint about how I observe fresh changelogs in PVE (currently in 8.4.19) before installing updates. 1) I have configured mail notifications about available updates: a) In /etc/pve/datacenter.cfg I have (among...
  • M
    mrmdemic replied to the thread Clean install Connection error - not loading WEB GUI.
    Thanks - and i totally agree with your statement on going headfirst :D In my defence ;) i have read lots of people comments on the script and looked on how many times it was used :) I will scale down the setup to the server only and see if i...
Show older items
Top Bottom
Back