Latest activity
-
Eeclipse83 replied to the thread 9.1.1 Installation issue with PERC H730 Mini.I did just that, and I think I managed it! I had a spare 1TB SSD, so attached that to the internal USB port and have installed PVE onto that - and will use my two 600GB SAS disks for storage/VMs etc, I guess. Hopefully that was the right thing...
-
Ggfngfn256 replied to the thread [SOLVED] lxc_init: 845 Failed to run lxc.hook.pre-start for container.I thought (maybe incorrectly?) that the OP was having issues with the First Guest Boot Delay not helping his issue.
-
Ddtreth reacted to Onslow's post in the thread serial console to VM hangs after extended time away and is unrevocerable except on reboot with
Like.
Welcome, @dtreth I don't know why it hangs. I'm just thinking out loudly how to bypass the issue... I would log in to the VM by other means (e.g., ssh) and inspect the situation when the console is hung. Then maybe restart getty (or whatever is... -
Ddtreth replied to the thread serial console to VM hangs after extended time away and is unrevocerable except on reboot.I can tell you that I used the noVNC to inspect and restart the getty. I tried to ask Claude (I know...) for some advice and using systemd overrides to tell the service to reset didn't help. It seems like the emulates serial device itself is what...
-
Sspace_people replied to the thread [SOLVED] lxc_init: 845 Failed to run lxc.hook.pre-start for container.Must have been mistaken, the 10 second boot delay fixed the issue for us. Thanks for your help today!
-
JIch würde eine Neuinstallation mit ZFS empfehlen. Da bist du mehr flexibel. local hat da zB. Zugriff auf allen Speicher. Ansonsten: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_creating_an_extra_lv_for_span_class_monospaced_var_lib_vz_span
-
Ggfngfn256 replied to the thread [SOLVED] lxc_init: 845 Failed to run lxc.hook.pre-start for container.Maybe a workaround: Find an LXC that does starts up fine at boot & then configure the order for that LXC to startup first, & then add a Startup delay to that container, so that the subsequent LXCs startup successfully. You could even create a...
-
JYour manual mount use a kind of nfs version (4.0/4.1/4.2) while in storage.cfg you define version 3 which depends on rpcbind which your zerofs doesn't have as you wrote. Btw. why use a uncommon nfs server if any linux has a functional kernel nfs...
-
JFourth device is another Mac Mini, but older and less memory, ZFS is something I am starting to explore - the replication feature is 'desirable' based on the possibility of needing to maintain some services. If I was to go 10gig I'd need...
-
J1Gig switches for the primary network, completely separate 1gig switch for corosync. I binned all my Cisco switches after a house move, big, heavy, noisy, power hungry. Two Cisco's use more power than my entire setup. 1gig is fine, ZFS I just...
-
MM_D replied to the thread Comments on nodes disks?.Thanks for pointing that out. Hopefully it gets integrated, would be a really useful feature.
-
WWichets reacted to Gilberto Ferreira's post in the thread ZFS Replication failed: got timeout with Like.
Oh! Good to know. Perhaps Proxmox staff can do same sort of box in the replication web gui session, to increase this value. Just an idea. @fiona @t.lamprecht
-
WYes I think it’s 95% better with the patch, at most one per scrub now vs dozens of emails before.
-
Sspace_people replied to the thread [SOLVED] lxc_init: 845 Failed to run lxc.hook.pre-start for container.Which logs would we be looking into? What exactly does writing nvidia-smi to /dev/null achieve? We should state, the boot delay had been tried previously (either 30 or 60 seconds), with no success. However, commenting out the mountpoint for...
-
Nn10ev replied to the thread Lose Access after every Restart.Howdy! Indeed, it sounds like an issue with the enabled/ disabled promiscuous mode. In the Linux Kernel Documentation in section "10. Promiscuous mode", there are explanations of how this mode should work with the different bonding modes...
-
Wwaltar replied to the thread NFS and ZeroFS.Your manual mount use a kind of nfs version (4.0/4.1/4.2) while in storage.cfg you define version 3 which depends on rpcbind which your zerofs doesn't have as you wrote. Btw. why use a uncommon nfs server if any linux has a functional kernel nfs...
-
Jjfmatth replied to the thread NFS and ZeroFS.@waltar Thank you for the prompt reply. Unfortunately, those changes didn't work. In asking AI what it could be, the CLI options tell Linux to skip any standard NFS checks and just mount the export. Proxmox seems stricter in what it will do...
-
Nn10ev reacted to d.oishi's post in the thread Is it possible to have the second nic on my server to be used to access the GUI when the first nic goes down with Like.
Using two interfaces on the same subnet and assigning each of them an IP address is not a common way to provide redundancy. In general, bonding is used for this purpose. Here is an example configuration. If you want automatic failover, the...
-
TTErxleben replied to the thread Local LVM vergrößern.Per Webgui geht das nicht. Entweder Neuinstallation und die passende Größe dabei festlegen- Oder externe Platte per USB einbinden. Letzteres ist die schmerzloseste Variante.
-
Ich würde eine Neuinstallation mit ZFS empfehlen. Da bist du mehr flexibel. local hat da zB. Zugriff auf allen Speicher. Ansonsten: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_creating_an_extra_lv_for_span_class_monospaced_var_lib_vz_span