Latest activity
-
Ddelmo replied to the thread [SOLVED] SSH AllowTcpForwarding set to no automatically?.Hi, It seems the network problem in the same time confused me. Thank you very much.
-
Llsichert replied to the thread Installation internet.Can you reach your gateway? I.e. does ping 192.168.1.1 work?
-
Dd.oishi reacted to Raid007's post in the thread KVM processes in SWAP despite 35-55 GiB free RAM – Proxmox + ZFS with
Like.
I tried setting the ARC limit at runtime. However, arc_summary showed no change. Further research reveals that this is expected behavior — zfs_arc_max can technically be changed at runtime, but the internal value arc_c_max that actually... -
UWhere does the expected performance come from? Is it from the manufacturer and in an unrealistic perfect (sequential) scenario? RaidZ1 write is never more than a single drives performance. RaidZ1 is also not a good fit for VMs due to the low...
-
DDaveing replied to the thread [SOLVED] proxmox does not see some ssds.Thanks for the assist. Mine was showing "logicalsectorsize=512 sectorsize=512". Now "logicalsectorsize=512 sectorsize=4096". Working now.
-
Ffloh8 reacted to philkunz's post in the thread Install NUT directly on Proxmox VE and control guests from here with Like.
For snmp enabled devices we wrote this tool: https://code.foss.global/serve.zone/nupst
-
Mmm3814 replied to the thread Installation internet.Thanks root@pve:~# ping 8.8.8.8 ping: connect: Network is unreachable # network interface settings; autogenerated # Please do NOT modify this file directly, unless you know what # you're doing. # # If you want to manage parts of the network...
-
Llsichert replied to the thread Installation internet.Have you tried to ping 8.8.8.8? Otherwise can you show your /etc/network/interfaces?
-
Mmm3814 replied to the thread Installation internet.I have done a fresh install attempted to run scripts and I get this. root@pve:~# bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/pve/post-pve-install.sh)" curl: (6) Could not resolve host...
-
CCS_Luca posted the thread Avoiding Sync Job Errors with Rotating Offsite Datastores in Proxmox Backup Server in Proxmox Backup: Installation and configuration.I'm running into an issue with my Proxmox Backup Server setup and now i need some help. I have two external offsite drives configured as separate datastores. I rotate them manually, meaning only one of the two disks is connected to the server at...
-
IIsThisThingOn replied to the thread [PVE 9/ZFS-Based VM/LXC Storage] Why Shouldn't I Disable Swap Inside Linux VMs?.Same here. How else could I speed up reads with ARC? ;)
-
SteveITS reacted to Raid007's post in the thread KVM processes in SWAP despite 35-55 GiB free RAM – Proxmox + ZFS with Like.
I tried setting the ARC limit at runtime. However, arc_summary showed no change. Further research reveals that this is expected behavior — zfs_arc_max can technically be changed at runtime, but the internal value arc_c_max that actually... -
Hi, Did you check /etc/hosts on each host? Sometime there is a stale entry that causes lots of pain. -
Ppsalkiewicz replied to the thread [SOLVED] SSH AllowTcpForwarding set to no automatically?.Hi, PMG doesn't touch sshd_config by itself. In this case I suspect 2 possible ways it could have happened: Ansible hardening role — Roles like dev-sec.ssh-hardening (or similar CIS/STIG-based hardening playbooks) explicitly set...
-
Mmorph027 reacted to Deerom's post in the thread Tuxis launches free Proxmox Backup Server BETA service with Like.
Hi @ all! Good news, we've re-opened the creation of free PBS datastores! You can order your datastore via https://www.tuxis.nl/en/proxmox-backup-server/ Performance has noticeably been improved thanks to the fixes that Proxmox-devs wrote for...
-
so yes :) l2arc almost never yields useful results. you're better off just using the drive seperately. More to the point- what is your usecase? in a homelab, its common that your bulk storage can be slow without any real impact. put your...
-
UdoB replied to the thread [PVE 9/ZFS-Based VM/LXC Storage] Why Shouldn't I Disable Swap Inside Linux VMs?.Correct. That's the reason I didn't test it myself, yet. Please do not hesitate to tell us you findings :-) Fortunately my professional cluster has more physical Ram than it needs. And for my homelab I bought some MiniPC with 128 GiB Ram just...
-
BBoss replied to the thread [SOLVED] /dev/centos/root does not exist after migrating CentOS7 from vmware to proxmox VE.Thanks for following up. I've tried so many things , so I'm not sure anymore. I think I focused on the reply from mmcarn as it allowed me to boot up the qcow2 image which I couldn't before plus it was more recent than the second comment -...
-
RRaid007 replied to the thread KVM processes in SWAP despite 35-55 GiB free RAM – Proxmox + ZFS.I tried setting the ARC limit at runtime. However, arc_summary showed no change. Further research reveals that this is expected behavior — zfs_arc_max can technically be changed at runtime, but the internal value arc_c_max that actually...
-
UdoB reacted to Johannes S's post in the thread [PVE 9/ZFS-Based VM/LXC Storage] Why Shouldn't I Disable Swap Inside Linux VMs? with Like.
I didn't but will definitevly change this asap ;) One should take into account that for zswap you always need physical swap as backing device. For example if you use the defaults of PVEs installer for ZFS you will endup without space for a...