Latest activity
-
Wwoma replied to the thread Edit Boot Order Graphical error.Maybe your graphical issue is related to this thread: https://forum.proxmox.com/threads/graphical-errors-on-pve-webui-9-1-6.181154/#post-840458 There were issues with incorrect display of webgui elements when jumping from 9.1.5 to 9.1.6 before...
-
This gives the IOPS of a single spindle. Recommended is to use (two) mirrors --> double IOPS for writing data and four times the IOPS for reading data. And... for rotating rust I highly recommend to add two fast - but small - SSD/NVMe as a so... -
Ddamiengm replied to the thread Install NUT directly on Proxmox VE and control guests from here.Hi @philkunz Thanks for the very detailed answer, this helps alot in how I set the thresholds up. I was on 5.6, so I upgraded to get the HaPolicy stuff. It doesn't look like there is an edit action command on the CLI so I edited the config file...
-
news reacted to Impact's post in the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?! with
Like.
Hmm. Probier mal das for i in 1 2 3 4 5; do ps faux | grep [q]m; echo "---"; sleep $i; done Oder alternativ halt perf top --sort pid,comm,dso,sym Das sollte die PID des Prozesses anzeigen. So kann man eventuell recht einfach schauen was die Last... -
Aa.woll replied to the thread SA score ändern.Hi, hast Du mal probiert, ob es was bringt, wenn Du in die /etc/pmg/pmg.conf in der section:spam den Parameter "spam_level 6" einträgst und mittels "systemctl pmg-smtp-filter" den Dienst neu startest? Ich habe rspamd nicht im Einsatz und kann...
-
Zzyghom replied to the thread [0x08000800]: an uncorrected error caused a data fabric sync flood event.problems with reboot solved but, CPU temperature always 90-95C - so that is not ok trying now to use older kernels and check is this issue is kernel version related or no
-
IIsThisThingOn reacted to Johannes S's post in the thread [PVE 9/ZFS-Based VM/LXC Storage] Why Shouldn't I Disable Swap Inside Linux VMs? with Like.
I didn't but will definitevly change this asap ;) One should take into account that for zswap you always need physical swap as backing device. For example if you use the defaults of PVEs installer for ZFS you will endup without space for a...
-
Cchristophe reacted to spirit's post in the thread [SOLVED] Veeam v12 Native Proxmox Integration - Delivering 4.9 Gbps Backup Speeds to Offsite Storage with Like.
https://pdm.proxmox.com/docs/roadmap.html ;)
-
Aa.woll replied to the thread [SOLVED] Beherrscht PMG v9.0.6 kein ARC-Signing?.Danke. Ja.
-
Aa.woll reacted to Stoiko Ivanov's post in the thread [SOLVED] Beherrscht PMG v9.0.6 kein ARC-Signing? with Like.
Ist derzeit (noch) nicht implementiert - siehe: https://bugzilla.proxmox.com/show_bug.cgi?id=4651 steht auf unserer TODO list - aber ich kann nicht versprechen wann wir dazu kommen es zu implementieren. Ich hoffe das hilft!
-
Ddamiengm reacted to philkunz's post in the thread Install NUT directly on Proxmox VE and control guests from here with Like.
Hi Damien, As of v5.7.0, this is how it works: 1) Multiple UPSes / groups You can attach actions either directly to individual UPS devices, or to a group. UPS-level actions are evaluated per UPS, independently. Group-level actions are evaluated...
-
Ccomplexplaster27 replied to the thread Edit Boot Order Graphical error.Very interesting, on 9.1.5 no-sub repo same as yours.
-
-
Dd.oishi replied to the thread Edit Boot Order Graphical error.I updated to the current no-subscription repository, but the issue did not occur. # pveversion --verbose proxmox-ve: 9.1.0 (running kernel: 6.17.13-2-pve) pve-manager: 9.1.7 (running version: 9.1.7/16b139a017452f16) proxmox-kernel-helper...
-
-
Hhalesia replied to the thread NVMe Issue: Unable to change power state from D3cold to D0, device inaccessible.For anyone still troubled by this issue, upgrading the drive firmware to the latest version can resolve it. My drive has been running normally for two weeks after the upgrade (without any other special configurations). You can download the latest...
-
Ccomplexplaster27 replied to the thread Edit Boot Order Graphical error.Oh sorry I meant Virtual Environment 9.1.6 not latest. Interestingly, on my Cluster that has the enterprise repo it's also on Version 9.1.6 but it doesn't have the issue but the one in the screenshot is the non subscription repo, i'll try...
-
Pphilkunz replied to the thread Install NUT directly on Proxmox VE and control guests from here.Hi Damien, As of v5.7.0, this is how it works: 1) Multiple UPSes / groups You can attach actions either directly to individual UPS devices, or to a group. UPS-level actions are evaluated per UPS, independently. Group-level actions are evaluated...
-
Aalpha754293 replied to the thread Mediated vs Passthrough of iGPU.Sorry for ressurrecting this old thread, but how do I pass the audio device from a mediated Intel iGPU through to my VM? Normally, when I am passing my nVidia GPU through to my VM, I would check the "all functions" box and that will pass the...
-
Ccomplexplaster27 posted the thread Edit Boot Order Graphical error in Proxmox VE: Installation and configuration.Hello just wondering if anyone has noticed on the latest Proxmox that the Boot Order options have this graphical glitch on the enabled field like so:
-
-
FFearless-Grape5584 posted the thread How to build isolated VXLAN networks across Proxmox cluster nodes — and why they still can't reach outside in Proxmox VE: Networking and Firewall.Before getting into it: this is not meant to be the only or universally best way to do this. You can solve similar problems with router VMs, OPNsense/pfSense, or more fabric-style designs. This post is specifically about a minimal-resource...
-
Iinder441 replied to the thread Proxmox Env Inventory.I hear you, Johannes. Trust is the hardest currency to earn in this industry, and starting as an 'unknown' on a forum is a steep hill to climb. I respect your caution—it’s the right mindset for a production admin. Regarding the Ansible plugin...
