Latest activity
-
JJohannes S replied to the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage.You are welcome: I noticed that I missed to link the thread where lnxbil described his way to use special_small_blocks, so I edited my post to link it: https://forum.proxmox.com/threads/zfs-metadata-special-device.129031/post-699290 Please note...
-
NNuwanda reacted to JanN's post in the thread PBS: New instance add existing datastore - errors with
Like.
I also had the problem, to add an existing datastore from my former PBS under the previous OS-release to a new installed PBS on different hardware (less energy consuming Dell Wyse 5070 with external HDD) under the latest PBS 4.0.14 OS. I tried a... -
Lluna-mortem reacted to berlon's post in the thread [TUTORIAL] PBS mit NFS an Synology, mein Weg zum gelingen with Like.
Vorgeschichte IcH hatte von Anfang an ein Problem men PBS mit der Synology zu verbinden. PBS konnte keine korrekte Verbindung mit dem Share eingehen. Vorschläge in diesem und im Synology Forum waren nicht zielführend. Hier mal meine...
-
MMarkusKo replied to the thread Help with Network Configuration for first time user.Better isolate it, create an additional minimal debian vm or debian container on your synology or use a raspberry pi. *edit* Depending on your requirements you could just run your PVE hosts standalone, not in a cluster, then you don't need a...
-
Daniel-Doggy replied to the thread Proxmox and ZFS Storage.Generally it is recommended to go with mirrors and not zRaid 5. (If you can swallow the disk size loss and total disks as mirrors are basicly raid 1.) This is due to both the complexity it brings to users who are new or less experienced to ZFS... -
UdoB reacted to MarkusKo's post in the thread Help with Network Configuration for first time user with Like.
Looks good. Not sure if you need a LAG for Management, you could just assign a differnet subnet to each of the adapters, less complexity. Don't forget to add a qdevice or you will get issues with your 2 node cluster. And for PBS, it is... -
TTErxleben replied to the thread snap shots Backup script.I.d.R ist es schwierig bis unmölich den Provider zu wechseln. Wer bietet denn überhaupt nichtdynamische (Präfixwechsel) an? Gegen einen monatlichen Obulus kannst du das natürlich kaufen. An eine RIPE-"Empfehlung" hält sich aber kein Schwein...
-
UdoB replied to the thread RAIDZ-1 PBS Mismatched Disk Sizes.You can make this work on the CLI, see man zpool-create: The use of differently-sized devices within a single raidz or mirror group is also flagged as an error unless -f is specified.
-
IIsThisThingOn replied to the thread snap shots Backup script.Wenn dein ISP sich an die RIPE Empfehlungen hält, bekommst du ein statischen /48 oder /56 Präfix. Wenn er das nicht tut, ist dein ISP für'n Arsch. Für Foren wie Proxmox gilt dann IMHO: name and shame!
-
UdoB replied to the thread [SOLVED] Proxmox 9 - IO error ZFS.All properties are persistent, as far as I know.
-
powersupport replied to the thread Error when backing up 1 out of 4 vms only.timesout.Hi, This usually happens when the server is a bit busy during the scheduled backup time. Since manual backups work fine, the issue is likely due to higher load when the automatic backups run. You can try running backups at a different time... -
Jjoker45 replied to the thread [SOLVED] Proxmox 9 - IO error ZFS.Hey Guys, we fight with this issue today. We had an bigger Database import in Mysql8. Everytime after some minutes the VM freeze/pause with the I/O error. We guessed something wrong with the SSD/HDD, but SMART told us everything is fine. We...
-
Ffish2222 replied to the thread Proxmox and ZFS Storage.Since the VM's that will be running at the Phone PBX, the HVAC control server, and Quickbooks. They all can survive data loss, which I understood when I started this project. On the mirrored device vdevs, essentially what I read is that you...
-
UdoB reacted to effin_dead_again's post in the thread (Unofficial) Proxmox VE VDI Client - New Release 3.0.0! with Like.
All, I'm excited to announce a new release of the unofficial VDI client for Proxmox VE (v3.0.0)! New features: New look and feel! (Replaced PySimpleGUI with customtkinter) Added pagination for large sets of VMs (page size customizable in...
-
Ccrawrj replied to the thread Help with Network Configuration for first time user.Thank you! This is the first I am hearing of qdevice. I was planning to run PBS from a VM on a Synology device. Do you think that PBS would be a suitable place for qdevice or would it need to be its own machine?
-
Kkleinp reacted to phrankme's post in the thread [SOLVED] /dev/mapper/ubuntu--vg-ubuntu--lv at 100% with Like.
That worked! Thank you! Also this worked pretty well: sudo pvs sudo pvresize /dev/sda3 df -h # expand logical volume sudo lvextend -r -l +100%FREE /dev/mapper/ubuntu--vg-ubuntu--lv # resize partition sudo growpart /dev/sda 3
-
Ccrawrj reacted to MarkusKo's post in the thread Help with Network Configuration for first time user with Like.
Looks good. Not sure if you need a LAG for Management, you could just assign a differnet subnet to each of the adapters, less complexity. Don't forget to add a qdevice or you will get issues with your 2 node cluster. And for PBS, it is...
-
Sspintike replied to the thread Problem mit Hinzufügen von SSD-Speicher in Resource Pool."Bingo" :D Thanks @psalkiewicz for pointing that out. After changing /etc/pve/storage.cfg accordingly, everything works as expected.
-
UdoB replied to the thread CEPH Configuration verification.I gathered some experience a year ago: https://forum.proxmox.com/threads/fabu-can-i-use-ceph-in-a-_very_-small-cluster.159671/ If I want a stable system I would never start with less than three copies and min=2.
-
MMarkusKo replied to the thread Help with Network Configuration for first time user.Looks good. Not sure if you need a LAG for Management, you could just assign a differnet subnet to each of the adapters, less complexity. Don't forget to add a qdevice or you will get issues with your 2 node cluster. And for PBS, it is...