@Squ1sh !!
AWESOME !!! :)
Frankly this is the response I hoped to see one day when I made this post.
To hear of someone else who also sees a modding system as a way to unleash the potential of proxmox by making it easier to modify and that will...
Thank you for your reply. I cannot give you those outputs as I am unable to create a pool. I am still at the installation phase. I thought RAIDZ used striped-parity, not a mirror?
This is how I am attempting to configure the disks:
Are you sure you set ip up as RAIDZ? RAIDZ1 is like RAID1 (mirror) while RAIDZ1 is more like HWRAID3. I'm wondering due to the "Mirrored disks must have the same size"
Please post the output of zpool status -v and zpool list -v
With respect, disagree - yes there is an issue but seemingly cosmetic. There is a suggestion that if you dont enable iothreads then you're not even affected. Discussed elsewhere - its "test" repo for a reason.
Yes there's that issue but early...
wow this must be exactly my issue. I have that board and having that problem even though I turned off TPM as well. hate bios upgrades, bricked a number in my day :(
UPDATE: [UNSOLVED] - Flashed bios to latest and /sbin/kvm-ok says ok (enabled)...
Die 5% freier Speicher sind wahrscheinlich das Problem. Wenn beim letzten Kernel-Update zu wenig Platz war, wird das initramfs nicht richtig gebaut und dann kommt dieser Fehler.
Bevor du den Kernel neu installierst wie @bl1mp vorschlägt, check...
Thanks, but vanilla PBS doesn't fit here. I specifically need to combine bare-metal Bacula with PVE for an automated copy to offline LTO workflow. The VTL acts as the necessary staging layer to bridge the gap between deduplicated storage and...
Since I didn't get any responses here, I asked chatgpt and eventually got it worked out. I want to post my fix in case anyone else comes across the same problem.
So my sdd had a 1G partition that used to be /boot/efi (sdd2) but was somehow...
In your PVE, if you look at that VMs "Hardware" section, whats configured in there? Is there a USB device? Try removing that USB device from the hardware section and running the backup again.
e.g.
Please pardon my ignorance but I was under the assumption that you could make a RAIDZ-1 with different sized disks with the caveat that the entire RAID would configure itself around the smallest sized disk. Is this incorrect?
I was setting up a...
I Tryed your Fix
And Got an Error,
But i Fixed it now with Your Fix Itsselv.
The Problem was a Wrong Fieldname in the JSON
# 3. Trend-Analyse
trend_string="Speicher wächst aktuell nicht (laut API)."
days_until_full="Nicht absehbar (kein oder...
Hi,
What would you like to do? PBS has its own chunk-based deduplication and compression built in, and it's quite effective for VM backups specifically. Quadstor's dedup is block-level and more general purpose. If your primary workload is...