Latest activity
-
DDd1 replied to the thread Restores from VMware to Proxmox over Veeam locked at 3gbit/s.Hi, did you solve this problem? We are in a similar situation (Ex ESXi/Veeam => Proxmox 9.1/Veeam) and experiancing similar limited throughputs.
-
Ddriley replied to the thread Install deb.Hi, you can just use apt to install the .deb package. Navigate to the directory where the .deb file is located and run the following command: sudo apt install ./<your-file>
-
YYaZoal replied to the thread Backup Job Runs But Stops Midway — No Logs Generated for Most VMs (Happening on All 4 Servers).There's a known issue on the Proxmox_Backup_Server_4.1 - Known Issues & Breaking Changes [0][1]: Which kernel version is currently running on PBS? kernel: 6.17.2-1-pve is affected; make sure to use kernel 6.17.13-2 or 6.14.11-4 on the PBS...
-
HI want to install a .deb package on my proxmox host. I found installation instructions that include this line: dab exec dpkg -i /tmp/localpackage.deb but I do not have a program named "deb" on my installation. Is there a repository I can...
-
WWie erwartet, stumpfer KI Slop. KI ist halt echt eine Dunning Kruger Machine. Ist nett gemeint Kleiner, aber glaube niemand hat hier interesse an einem Backup KI Slop von jemandem, der noch nicht mal weiss, wie er 4 Dateien auf Github teilt...
-
Pphip posted the thread PBS: Less space on tape used than expected in Proxmox Backup: Installation and configuration.Hi all, we're regularly taking backup snapshots of some VMs with very large disks (20TB), which go to PBS and then to daily and weekly rotated tapes. While everything appears to run smoothly, I'm a bit confused about the reported size: The VM...
-
Ppulipulichen posted the thread How to prioritize a specific node group to survive during network partition in a cross-site cluster? in Proxmox VE: Installation and configuration.Hi everyone, I have a question regarding the HA quorum behavior of a Proxmox VE cluster in a multi-site environment. My current architecture is as shown in the diagrams: DC-A: 5 nodes (node-a1 to node-a5) DC-B: 5 nodes (node-b1 to node-b5)...
-
-
Aaryan.sx replied to the thread Proxmox node keeps rebooting.If by Qdevice you mean another node for qourum then I don't have one but plan on setting one up soon with potentially another pc that I have or a spare Pi 2 W. Node 1: Cluster information ------------------- Name: pvecluster Config...
-
SteveITS replied to the thread Proxmox node keeps rebooting.With or without a Qdevice for a third vote? What does “pvecm status” show, on both? And “corosync-cfgtool -s” -
Aaryan.sx posted the thread Proxmox node keeps rebooting in Proxmox VE: Installation and configuration.Firstly I would like to preface that I am a complete beginner to proxmox. I have 2 Hp mini pcs running proxmox clustered together. For some reason the first node keeps reboot after about 2 minutes and I'm not sure why. The end of the system logs...
-
Vvolker2108 replied to the thread [TUTORIAL] Proxmox VE Installer on Debian 12 Bookworm.So I misunderstood that thread... cause I thought "... on Debian 12 Bookworm" means a desktop environment. I use LMDE6 at my Dell Server. Actually Virtualbox is in use for VM (Win7, Win11,...) and the performance is not as good as expected...
-
Aaryan.sx posted the thread Proxmox node keep rebooting after few minutes in Proxmox VE: Installation and configuration.Firstly I would like to preface that I am a complete beginner to proxmox. I have 2 Hp mini pcs running proxmox clustered together. For some reason the first node keeps reboot after about 2 minutes and I'm not sure why. The end of the system logs...
-
Sscarletdevil19 replied to the thread LXC suddenly not booting.Here is the config arch: amd64 cores: 4 features: nesting=1,keyctl=1 hostname: qbittorrent memory: 1024 mp0: /mnt/pve/Eden,mp=/mnt/Eden mp1: /mnt/pve/Nagato,mp=/mnt/Nagato mp2: /mnt/pve/Wellspring,mp=/mnt/Wellspring net0...
-
BI'm setting up a new Proxmox server, and I'm new to Proxmox myself in general. I am attempting to connect it to my switch via a bonded LAG using LCAP. Proxmox and the switch seem to show the LAG is active, but I can't get the management interface...
-
Bbl1mp replied to the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage.Hi halfdan1988, just a few incomplete thoughts on the setup: Service distribution VMs/LXCs seems reasonable Just save yourself the pain ato run docker (and equivalents) in VMs instead of LXC. Currently most oft my workload is imported from OCI...
-
Iisaacntk posted the thread LXC silently loses IPv6 default route with SLAAC in Proxmox VE: Networking and Firewall.I want to start of saying I understand very little about how IPV6 works under the hood, and I'm not sure if my description of the issue is correct but I'll try my best. I had noticed one of my LXC containers running gitlab would occasionally...
-
Bbl1mp replied to the thread Proxmox Fehler beim Start: end Kernel panic - Not syncing: VFS: unable to mount root fs in unknown-block(0,0).Hi kiste01prox, was definitiv funktionieren sollte, ist ein Rescue Boot vom USB-Stick, dann kann man sich den Sachverhalt im Detail ansehen. Ggf. hilft es vorab im Boot Menü auch eine ältere Kernelversion auszuwählen, dann muss kein USB-Stick...
-
KI actually think I just discovered how to do this very easily via the GUI! For those in the same boat as me, it's found under Datacenter > Storage, not under the PVE node itself. Hopefully this helps someone eventually!
-
Aastehlik reacted to blackpaw's post in the thread Persistently Use FUSE Inside of LXC Container with
Like.
Have you enabled fuse in the Container Proxmox options (under Features). -
Wwellerbm replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.20.2.1 released on the 2nd fixes PR 66543 which includes PR 66542 https://docs.ceph.com/en/latest/releases/tentacle/#v20-2-1-tentacle osd: Fix fast EC truncate to whole stripe (pr#66543, Alex Ainscow)
