Latest activity
-
Ppulipulichen posted the thread How to upgrade PBS to Debian Trixie for ZFS 2.3+ vdev expansion? in Proxmox Backup: Installation and configuration.Hi everyone, I'm currently managing a Proxmox Backup Server (PBS) instance that's running out of storage space in the datastore. My current environment is PBS based on Debian Bookworm, which uses ZFS 2.2.6. As many of you know, older ZFS...
-
Ppulipulichen reacted to dakralex's post in the thread [SOLVED] Why does my PVE node still get rebooted by Watchdog when HA VMs are set to Ignored during a network outage? with
Like.
Great that the details helped you! The recommended way to put an LRM service into an idle state would be to either move all of the HA resources placed on that node to another node or put all the HA resources placed on that node into the... -
Ppulipulichen replied to the thread [SOLVED] Why does my PVE node still get rebooted by Watchdog when HA VMs are set to Ignored during a network outage?.Thank you for the detailed and patient explanation. It's helpful to understand the logic behind the LRM idle state and the specific conditions for restarting the service. It would be much easier if we could just toggle the watchdog or "disarm"...
-
Llouie1961 replied to the thread [SOLVED] SSD screws up Proxmox boot.wipe the drive before installing it.
-
JJedd replied to the thread e1000 driver hang.Adding another datapoint. Dell T5810 with a 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 05) Been fine for more than a year, with Linux version 6.8.4-2-pve but upgraded mid-March, and ~9 days later had the...
-
Aalexskysilk replied to the thread Joining new nodes simultaneously de-stabilizes and revert the cluster back to standalone hosts.You no longer have a cluster. or at least not a functioning one. before proceeding to troubleshoot adding a node, do you want to rescue the existing cluster, or start from scratch? if you want to rescue the existing cluster, you need to establish...
-
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.OMG Thank you! I am seeing the same issue and keep suffering zfs pool corruption the last few days. I just pinned back to 6.8.12-20-pve from 6.17.13-2-pve to see if it helps. I have a Raptor Lake (i5-13500) processor. I will try pinning to the...
-
Jjosephnp replied to the thread Joining new nodes simultaneously de-stabilizes and revert the cluster back to standalone hosts./etc/pve actually was deleted somehow during this fiasco. That's why the cluster reverted to being standalone node. I'm trying to figure out how that happens. root@host1:~# cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 10.60.116.92...
-
Jjaminmc replied to the thread [SOLVED] SSD screws up Proxmox boot.Without knowing any specifics, It could be a number of things. The BIOS may have that ssd higher in the boot order than your proxmox. And it is trying to boot a bad OS The SSD could be in your /etc/fstab and causing errors Your 2 TB SSD still...
-
PSorry for my late response, thank you for your feedback! As you mentioned it is only logged once, difficulty is that those messages are reported at the end in the logs, so it is a timing issue. For now I leave it, as it is not a recurring error...
-
Jjaminmc replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.You may want to test the new 7.0 kernel. https://forum.proxmox.com/threads/opt-in-linux-7-0-kernel-for-proxmox-ve-9-available-on-test.182328/
-
Ccelemine1gig replied to the thread Intel GPU PCI Passthrough with Windows 11 (Code 43 Error).Could it be, that you are trying to load an UEFI OpROM with a Legacy installation? "Checksum error" sounds strange, unless you did not really download the correct file.
-
cwt replied to the thread [SOLVED] Lexware Premium unter Win11 läuft sehr langsam, keinen offensichtlichen Grund, neue Hardware.CPU type auf Host gesetzt? Überprüfe in der VM mal (Powershell): systeminfo | findstr /i "hyper-v" Falls sowas ausgegeben wird: „A hypervisor has been detected“ solltest Du die CPU auf x86-64-v3 ändern. Ansonsten läuft Virtualisierung in... -
DDerekG replied to the thread Failing SSD - what's the best way forward with migrating?.I would perform an offline image clone of the 860 EVO to the MX500 and then make that the boot drive.
-
Jjaminmc replied to the thread [TUTORIAL] Proxmox VE Installer on Debian 12 Bookworm.Hard to tell. The Proxmox installation on Debian isn't really designed for a desktop environment. I suspect there is some sort of firewall enabled that could be blocking port 8006, which is the port used by the web interface.
-
Oorsiris replied to the thread [ANN] bzfs 1.18.0 near real-time ZFS replication tool is out.@ucholak Please note that syncoid offers zstd / lz4 configurable compression options out of the box too. Also, for having used all three tools for quite some time, I found the following: Syncoid: - Is really easy to setup and fits smaller...
-
DDerekG replied to the thread Intel GPU PCI Passthrough with Windows 11 (Code 43 Error).The previous versions online guides are outdated for Alderlake iGPU, if you ask AI you must be extremely specific with the information you provide. I have not had any success making that guide work, however I didn't put much effort into it...
-
Ccgirlamo replied to the thread [SOLVED] Proxmox vGPU configuration troubleshooting.hello, the fix for this was to enable all 3 gpus seperately for the sr-iov process. So,instead of sudo systemctl enable --now pve-nvidia-sriov@ALL.service run systemctl enable --now 'pve-nvidia-sriov@0000:5a:00.0' systemctl enable --now...
-
OOnslow replied to the thread [SOLVED] SSD screws up Proxmox boot.Hi, if you share the details, we may have a chance to help.
-
IIsThisThingOn replied to the thread Choosing upstream DNS for Proxmox homelab — what do people actually use?.That point is brainrot stupid. Especially considering that the point before was "censorship and blocking". It is not the DNS job to protect you from phising or malicious websites! It is the DNS job to translate domains into IPs. You are of...