Latest activity
-
AAbby2017 replied to the thread [SOLVED] Fehler nach VM Installation.Hast du nach der Installation von Debian die ISO wieder getrennt ?
-
LVM on iSCSI LUNs from a SAN (https://pve.proxmox.com/wiki/Storage:_LVM#pvesm_lvm_config) Pay attention to "snapshot-as-volume-chain" for snapshots. Maybe using multipath. If you are using Truenas 25.04+ as storage "ZFS over iSCSI" using the new... -
Cceghey replied to the thread [SOLVED] Anti-Cheat KVM Settings.Yes, these drivers don't see the disks. I have two disks, and I set the boot drive as IDE0 and the second as SCSI1, and installed the drivers manually. But the second drive isn't visible. ide0: local-lvm:vm-105-disk-1,size=200G,ssd=1 scsi1...
-
-
JJay1175 replied to the thread TASK ERROR: cannot prepare PCI pass-through, IOMMU not present - Previously working, no longer working after power outage.As some there are apparently different solutions for different bootloaders: efibootmgr -v BootCurrent: 0007 Timeout: 1 seconds BootOrder: 0007,0002 Boot0002* ... <a lot of characters, can add them in if needed, but 0007 is first in boot order so...
-
JJay1175 posted the thread TASK ERROR: cannot prepare PCI pass-through, IOMMU not present - Previously working, no longer working after power outage in Proxmox VE: Installation and configuration.EDIT - I resolved the issue by updating my motherboard firmware, restoring to factory settings, and re-enabling virtualization and IOMMU after firmware upgrade. No settings were changed from below. Mods, if you want to delete the post as its not...
-
-
G_gabriel replied to the thread PBS with NVME storage way too slow? How to optimize?.PVE version, as restore is PVE side. PVE 8.4 require updates to allow "Restoring from Proxmox Backup Server now fetches multiple chunks concurrently in each worker thread. This can improve the restore performance in setups with fast network...
-
RRollux replied to the thread Help to fix Proxmox access issues after power cut.FilesystemSizeUsedAvailUse%Mounted on /dev/mapper/pve-root68G20G45G30%/
-
SteveITS replied to the thread [SOLVED] Can't connect to acme - Let's Encrypt V2.Sounds like a DNS problem. Are the configured DNS servers valid? -
Jjaminmc replied to the thread [SOLVED] Anti-Cheat KVM Settings.The LSI controller is outdated, and its drivers are unreliable. I’ve updated the guide in post #47 to use the MegaRAID controller instead, and included the correct driver link. I hadn’t tested the LSI controller before my initial post—but I have...
-
TIs there a chance to open a support ticket @ Proxmox? Because it seems noone is working on this issue... I thought this would be a bug in a single kernel version, but there were many kernels released since 6.8.12-8-pve and ALL of them have this...
-
EErrorHunter posted the thread [SOLVED] Can't connect to acme - Let's Encrypt V2 in Proxmox VE: Installation and configuration.I try to create a Account. i try to make the account over the settings and over ssh. both say: Error: GET to https://acme-v02.api.letsencrypt.org/directory Can't connect to acme-v02.api.letsencrypt.org:443 (Temporary failure in name...
-
JJonathan50543 posted the thread Regression in 6.17.13-1/2-pve: DMAR faults with VFIO when intel_iommu=on iommu=pt (works on 6.17.9-1-pve) in Proxmox VE: Installation and configuration.Hello, I would like to report what appears to be a kernel regression affecting VFIO passthrough. Summary On my system VFIO passthrough works correctly with kernel 6.17.9-1-pve, but after upgrading to 6.17.13-1-pve or 6.17.13-2-pve, DMAR faults...
-
Mmillenium7 posted the thread Problem with HA host soft locking and staying 'unknown' in Proxmox VE: Installation and configuration.I can't find this exact problem elsewhere on the forum. In essence I do have a problem with a host in a 3 node cluster whereby it will soft lock occasionally, this might be once every 6 months. I don't believe this is a bug i'm pretty sure the...
-
ENachdem ich eine VM komplett installiert habe möchte das system den server neustarten (debian 12). nach dem neustart steht nur: Booting from Hard Disk. mehr nicht. weiß jemand woran das liegen kann
-
Aadadbrd posted the thread PBS S3 backend behind Cloudflare Tunnel fails with SignatureDoesNotMatch against MinIO, while direct local access works in Proxmox Backup: Installation and configuration.Component s3 / datastore Version 4.1.4 Severity normal Summary When configuring a PBS S3 backend against a self-hosted MinIO (or Garage) instance exposed through Cloudflare Tunnel, PBS fails with SignatureDoesNotMatch. The same credentials...
-
SStefan Kittel replied to the thread PBS with NVME storage way too slow? How to optimize?.Hello, version is 4.1.4.
-
G_gabriel replied to the thread PBS with NVME storage way too slow? How to optimize?.What PVE version ?
-
JJohannes S reacted to bbgeek17's post in the thread tips for shared storage that 'has it all' :-) with
Like.
Hi @mouk , It's not just not cluster-safe, it's not supported by PVE and you have to go out of your way to work around all the bumpers put in place to stop you. There are a number of commercial vendors in this space. It all depends on your... -
SSingman replied to the thread iSCSI interfaces.Maybe we could play with iscsi daemon, not sure of the result. https://docs.redhat.com/en/documentation/red_hat_enterprise_linux/7/html/storage_administration_guide/iscsi-config
