Latest activity
-
Generell sollte man portainer oder docker nicht direkt auf dem Host betreiben. Und ebenso generell wird empfohlen so Sachen wie docker, Portainer und Co in einer vm statt in einem lxc zu betreiben, da es dann deutlich unwahrscheinlicher ist, dass... -
BBoerny41 reacted to Impact's post in the thread Proxmox boots into busybox, unable to import rpool with
Like.
You can edit the kernel args during boot: https://gist.github.com/Impact123/3dbd7e0ddaf47c5539708a9cbcaab9e3#temporary-kernel-arguments I'm curious what they are at the moment. -
BBoerny41 replied to the thread Proxmox boots into busybox, unable to import rpool.Thank you! That was all I needed to do. Now I can fix my cmdline and everything is fine. I asked in two forums and read a bunch of threads from people with the same problem. Nobody mentioned this once. Now I can go back and get amd_pstate...
-
BBoerny41 replied to the thread Proxmox boots into busybox, unable to import rpool.I'll try that. Currently I'm failing to get my live boot system running. ZFS wasn't installed, but even after installing it, the commands were still unknown. Some userspace stuff or something... idk, gave up after two hours. Stupid AI suggested...
-
JJohannes S reacted to TheAncientMariner's post in the thread Should redundant corosync links be on seperate VLAN? with Like.
Sorry for necroposting but I want to add some considerations for anyone stumbling onto this thread in the future: Physical redundancy/separation (separate NICs, cables, switches etc.) is probably the most important part of a redundant cluster...
-
JJohannes S reacted to theMex's post in the thread [ Hint ] Just a tip to install Proxmox VE in Dell R620 with Like.
Thanks. I was hoping not to do any third party flashing, but unfortunately, I could not find any other way. Crossflash went smooth and now I have Proxmox running.
-
JJohannes S replied to the thread Performane LXC oder Docker.Generell sollte man portainer oder docker nicht direkt auf dem Host betreiben. Und ebenso generell wird empfohlen so Sachen wie docker, Portainer und Co in einer vm statt in einem lxc zu betreiben, da es dann deutlich unwahrscheinlicher ist, dass...
-
BHi I'm quite new to Proxmox VE and would like to seek some advise. Let's say I have a device on the network that is behind a switch with access port in VLAN 3. The device has an IP assigned statically. On the other end, I have a VM running...
-
GGhosthawk replied to the thread Problem with SANs on a three node cluster.Hi bbgeek17, that has nothing to do with ignore, more with understanding. Sorry, what did you mean with "client side ZFS"? I thought that if “ZFS over iSCSI” (attached picture) is offered as a storage system in Proxmox, I can use it—or am I...
-
-
JJohannes S replied to the thread Establishing Proxmox VE as a Cross-Platform Hypervisor with Full RHEL/EL9 Ecosystem Support.Feature requests should be filed on bugzilla.proxmox.com since there is no guarantee the developers will read everything on the forum. On Bugzilla however any new issue is read by a staff member. Now I'm not part of the team but a fellow...
-
So this works mostly* I tested it initially and it worked, posted this and tested again and it was broken... Then tested again today and it's fully fine. So honestly I have no idea, it kinda works. Tested so far is: lemonade-sdk, vkcube, vaapi... -
Jjuliokele reacted to ThoSo's post in the thread Einführung von Einschränkungen / Kennzeichnungspflicht von KI-Beiträgen with Like.
Ich bin der Meinung, das KI Antworten klar gegen den Community Gedanken sprechen und hier nichts zu suchen haben. Wer sich mit KI seine Probleme näher betrachtet und zu Lösungen kommt, dem ist damit geholfen. Man kann durchaus auch bei Problemen...
-
JJohannes S reacted to bbgeek17's post in the thread Problem with SANs on a three node cluster with Like.
Ok, you can ignore everything I said. @alexskysilk is correct in the direction you should be troubleshooting. You used a word combination that has very specific meaning in the PVE context "zfs over iscsi". However, you are just using straight...
-
JJohannes S reacted to bbgeek17's post in the thread Problem with SANs on a three node cluster with Like.
Keep in mind that OP is using ZFS/iSCSI scheme. ZFS volumes on the storage sever, their iSCSI exporting, and PVE iSCSI are managed by the native storage plugin. In fact, if I remember correctly, iscsiadm is not used. This approach uses built-in...
-
Jjuliokele reacted to cardre's post in the thread No spin-down via hd-idle after upgrade to 9.1.5 with Like.
For those following this thread, I've finally been able to unpin the proxmox kernel to use the latest 6.17.13-2-pve and have my two zfs mirror hard drives stay in standby. So for me at least with only a couple of hours testing, this finally...
-
Bbivlked replied to the thread How to install AmneziaWG (Wireguard with obfuscation)?.Quick update - Debian 12 and 13 support landed in v5.7.0. The installer now handles PPA codename mapping and DEB822 format automatically. If anyone wants to try it on a Debian VM: wget...
-
33dbruce replied to the thread No spin-down via hd-idle after upgrade to 9.1.5.Can confirm: With the 6.17.13-2-pve kernel spin-down is working again for me as well.
-
bbgeek17 replied to the thread iSCSI interfaces.PVE is trying to connect to all Portals that are advertised by iSCSI Target. There is no mechanism in PVE today that allows for filtering of the Portal connectivity. You may want to look at the Truenas side to see if there is anything you can do... -
bbgeek17 replied to the thread Problem with SANs on a three node cluster.Ok, you can ignore everything I said. @alexskysilk is correct in the direction you should be troubleshooting. You used a word combination that has very specific meaning in the PVE context "zfs over iscsi". However, you are just using straight...
-
Kkalle replied to the thread [gelöst] Kann vom LXC kein Backup machen. Fehlermeldung und Abbruch.Ich habe das Backup zur Kontrolle auch einmal zurück schreiben lassen. Das hat auch Funktioniert!:)
