Ja beim PVEstatd bekomme ich immer ein Failed with result 'signal'
root@pve:~# systemctl status pvestatd
× pvestatd.service - PVE Status Daemon
Loaded: loaded (/usr/lib/systemd/system/pvestatd.service; enabled; preset: enabled)
Active...
Hello,
After upgrading Proxmox Backup from 4.0 to 4.1.x and switching the kernel from 6.14.11-6-pve to 6.17.13-2-pve, the drives connected to the DIGITUS DS-30104-1 controller (Marvell 88SE9230 chipset) are no longer detected.
Hardware details...
We use xfs based nfs(4.2) storage for all pve (vm+lxc) images which your powerstore could do too.
First having a couple of templates which consists of 1 pseudo 1MB (eg "9000") one and the real ones which could be differnt (here linux) OS'ses and...
I do have two older kernels to choose from when booting, but all of them end up like this. This problem started after I messed with /etc/kernel/cmdline (I guess I got a typo or something in it) and executed proxmox-boot-tool refresh.I have to...
This is a patch that you can apply for current Proxmox 9.x and PBS 4.x systems.
Edit:
Unfortunately it needs a reboot. Only tested for PVE (Thanks @TaktischerSpeck) PDM / PBS might still need a reboot
Updated for PDM, Update for reboot...
Bei deiner Konfiguration muss auf local (PVE) auch genug Platz frei sein!
Überprüfe mal deinen LXC auf Dateisystem Fehler.
https://www.reddit.com/r/Proxmox/comments/bh9zm9/2_lxcs_failing_to_backup/
Klasse,es läuft wieder
Folgender Hinweis von @Ernst T. hat geholfen. Vielen Dank !!
pct fsck VMID
Offensichtlich waren da ein paar Daten defekt.
pct fsck VMID
Bei deiner Konfiguration muss auf local (PVE) auch genug Platz frei sein!
Überprüfe mal deinen LXC auf Dateisystem Fehler.
https://www.reddit.com/r/Proxmox/comments/bh9zm9/2_lxcs_failing_to_backup/
Just updated the BIOS of my PC Asus B55M-Plus
OS: Proxmox VE 9.1.6 x86_64
Kernel: Linux 6.17.13-2-pve
Display (HWP3337): 2560x1440 @ 60 Hz in 32" [External]
CPU: AMD Ryzen 5 5600G (12) @ 4.46 GHz
Memory: 15.12 GiB / 125.10 GiB (12%)
Swap: 0 B /...
I've recently encountered this very odd issue while interacting with containers using pct or the web interface terminals, I'm not really sure how to describe it, so I'll just attach a video of happening in joe, although, it also affects other...
"Ist lokal, auf dem PVE Server , genügend Platz für das Backup und sind keine externen ISO Medien usw. in das LXC eingebuden?"
ja genügend Platz für das Backup auf der Syno. Keine ISO Medien eingebunden.
Habe versucht das Backup auf den Proxmox...
Was wurde in /etc/vzdump.conf geändert?
Ist lokal, auf dem PVE Server , genügend Platz für das Backup und sind keine externen ISO Medien usw. in das LXC eingebuden?
Thanks for good manual!
I replaced the disk and network adapter, but it still detects the virtual machine. I couldn't change the SСSI Controller to LSI because after the change, the boot disk is lost.