Ich verstehe nicht ganz dein Problem.
Natürlich kannst du ein NAS für Backups benutzen und neu aufsetzten muss man gar nichts.
Was ist denn ganz genau dein Problem?
Your sending on the 587 port?
can you give (sensitive info removed if there) show output of:
ps aux | grep saslauthd
ss -tlnp | grep 587
grep -A10 "^587 " /etc/postfix/master.cf
swaks --to support@yourdomain.com --from noreply@yourdomain.com \...
Danke an @Johannes S und @Falk R. ! ich gehe jetzt nicht auf alle einzelnen Punkte ein ...
Mein Plan geht nun in Richtung 4 oder 5 von diesen Toshibas (gewünschte Kapazität des Pools kläre ich noch mit dem Kunden), als RAID5, vermutlich...
Danke an @Johannes S und @Falk R. ! ich gehe jetzt nicht auf alle einzelnen Punkte ein ...
Mein Plan geht nun in Richtung 4 oder 5 von diesen Toshibas (gewünschte Kapazität des Pools kläre ich noch mit dem Kunden), als RAID5, vermutlich...
The official docs:
And the specific documentation for LVM: https://pve.proxmox.com/wiki/Storage:_LVM
Please note LVM, NOT Lvm/thin, they are not the same. LVM/thin doesn't work with shared storage like a FC san, LVM works.
Following writeups...
Ich würde dringend dazu raten einen Benchmark mit beiden Varianten zu fahren (ja, das dauert dann halt etwas länger, weil man dann ja mehrmals neu aufsetzen und testen muss). ocfs2 ist halt wirklich nicht gut unterstützt und das wird sich auch...
Hello, I have several Windows Server VMs, and the older ones with TPM in .raw format have no problems. Since the update, I wanted to try machines with TPM in .qcow2 format to take snapshots.
Unfortunately, after a while, these VMs have a problem...
Your reply confirms this is a two-phase problem:
Phase 1: Why does re-peering take long enough to cause 120s+ blocked I/O?
On NVMe with 10G networking, peering 75 PGs should complete in seconds, not minutes. Something is making it abnormally...
FWIW, based on info I had found here, we set:
nodeep-scrub
noout
norebalance
norecover
noscrub
After rebooting a node, we uncheck "norecover" flag so it can recover, which takes 5 seconds or so, then set norecover again, and repeat with the...
Oh, my bad, I mixed up your hostnames while zooming in and out of screenshots and trying to remember the names in the mean time.
On pvebig:
echo '10.201.3.215 pveraider' >> /etc/hosts
and on pveraider
echo '10.201.3.192 pvebig' >> /etc/hosts
Hallo,
Kann ich ein 2. NAS als Sicherung (mit mehreren Pools) verwenden? Ist ein lösen/einbinden leicht möglich (falls die Sicherung an einem anderen Ort stehen wird).
Muss ich dann bei jeder Sicherung das 2. NAS komplett neu aufsetzen?
LG pbaud
Yes, the 27th of September is the first day of the PBS. The screenshot is only to view the PBS don't clean the logs.
I attach the screenshot of the last logrotate task.
Die ist OK, aber halt nicht mehr neu. Toshiba hat die SSD Sparte vor einigen Jahren in Kioxia umbenannt, daher weiß man, wenn da auf einer SSD noch Toshiba steht, ist die nicht neu.
In der Regel sollte das schon passen, die MSA mit ihrem Raid...
Hey everyone, I wanted to share a solution I've been running for a few weeks that solved a persistent headache with Veeam worker VMs on Proxmox.
My setup is Veeam Backup & Replication 13 (build 13.01.1071) running against Proxmox VE 9.1.4 with...
Glad that upgrading to the latest kernel worked for the reporters here - this is the recommended way to not run into issues with a different ZFS userspace and kernel version!
But if someone runs into this issue - and still needs to run an older...