Latest activity
-
IIrvington973 replied to the thread [solved] zfs-import-scan failed.Thank you guys so much. I had this problem for a long time! Turns out it was a disk that was connected to Truenas but after finding it and using zpool labelclear -f /dev/ it cleared.
-
RPerhaps you should read the docs: https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/During_an_ONTAP_upgrade_is_there_a_risk_of_losing_uncommitted_data_if_an_NVRAM_failure_occurs#:~:text=or SnapMirror Synchronous)-,Answer,is typically about 10...
-
Ppbexiga posted the thread Regression in 6.17: ASMedia ASM1164 SATA controller forced to max_performance, preventing disk spin-down in Proxmox VE: Installation and configuration.Hello, first time poster - and I must admit, I used AI (Claude) to help me piece together all the information for this post. Although I did run through a bunch of troubleshooting to understand where the issue was before going to AI for help. I've...
-
Cciax replied to the thread LLMs auf Proxmox mit AMD AI CPUs (Strix): iGPU funktioniert – NPU aktuell nicht.Das sind tolle Neuigkeiten in dem Bereich, danke für die Info, Beschreibung und feedback. Noch sind unterstützte LLMs überschaubar - https://fastflowlm.com/docs/models/ - macht aber Lust auf mehr und zuversichtlich. Benötigt dazu, scheint neue...
-
Tt.roloff replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.Ok, tried 6.17.13-1 - still doesn't work.
-
KKingster8400 posted the thread [SOLVED] Hetzner Proxmox with pfsense config in Proxmox VE: Networking and Firewall.Trying to setup the networking side so that my VMs in Proxmox can receive packets (want to set up some game servers). Think I've messed up my routing somewhere but been at it for a couple days and can't figure it out. My WAN port for pfsense is...
-
-
Pperfektionsloge replied to the thread [SOLVED] ZFS scrubbing does not work anymore on Kernel 6.14.11 (and cannot upgrade to 6.17.X because of NVidia).Fix: proxmox-boot-tool kernel unpin
-
Ssantiagobiali reacted to prudentcircle's post in the thread HA Live Migration of ZFS replication still fails in PVE 8.2 with
Like.
I'm happy to report that setting AllowTcpForwarding to "yes" resolved the issue. Here in Korea, some government agencies require certain SSH settings, including setting "AllowTcpForwarding" to "no", for security purposes. It is good to know that... -
Ssantiagobiali reacted to prudentcircle's post in the thread HA Live Migration of ZFS replication still fails in PVE 8.2 with Like.
@fabian Good point. I did indeed set some Forwarding options to no in my sshd_config AllowAgentForwarding no AllowTcpForwarding no I will test again if setting AllowTcpForwarding to yes will solve the problem.
-
Vvoltaiac posted the thread Trouble running pvesm in cron in Proxmox VE: Installation and configuration.Hi all, I'm not sure pvesm is running when done so by cron. I've checked a few things and i've come to the conclusion that on my system in cron; * * * * * pvesm apiinfo does nothing * * * * * pvesm apiinfo > /tmp/pvesmtest makes a file, but has...
-
Mmihaib replied to the thread reinstall proxmox and keep the settings.I am back-ing up by using the bkp button from the web interface: then the VM loops like this: to restore I am using qmrestore /path to bkp files (3) machine ID (100 in this case) Basically, I copied the .vma.zst file to the new install disk...
-
-
Vvoltaiac replied to the thread System won't fully reboot or shutdown.Of course now that I want to test it it doesn't do it. Bring you back with updates if anything goes wrong.
-
JPlease actually check your write amount before needlessly implementing things like that.
-
JJohannes S reacted to IsThisThingOn's post in the thread How to Reduce SSD Wearout in Proxmox? with Like.
Watch out when doing PBS backups with that setting. If I remember correctly, PBS makes use of that. To get back to your initial question "How to reduce wear out" the correct answer IMHO would be: Don't worry! Others here recommended PLP drives...
-
Jnode > Disks or lsblk -o+FSTYPE,LABEL,MODEL. node > Disks > .... What to use depends a bit on the use case and model number of the disk. Please share yours. I like ZFS but it tends to perform badly with VMs on HDDs. without disabling sync or...
-
JJohannes S reacted to Impact's post in the thread Do you need to shutdown VMs to backup them with stop mode? with Like.
Is there a specific reason you use stop mode?
-
JJohannes S reacted to Onslow's post in the thread Do you need to shutdown VMs to backup them with stop mode? with Like.
Hi, @IsThisThingOn For the questions about stop mode I don't know the exact answers. For the dirty bitmaps: from the docs ( https://pbs.proxmox.com/docs/technical-overview.html#fixed-sized-chunks ) and from the observation I know that dirty...
-
JPerhaps you should read the docs: https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/During_an_ONTAP_upgrade_is_there_a_risk_of_losing_uncommitted_data_if_an_NVRAM_failure_occurs#:~:text=or SnapMirror Synchronous)-,Answer,is typically about 10...
-
Eeeyanduf replied to the thread can't open '/sys/fs/cgroup/qemu.slice/2113.scope//memory.current' - No such file or directory (500).Yes - I resolved display issues by patching the perl in QemuServer.pm. Restore still failed with Veeam backups vmware > Prox however. The only way i could get this to work was to upgrade Veaam to version 13 (we were on 12) after which...
-
Iidalys replied to the thread [SOLVED] Unable to type special characters/symbols in NoVNC web console.For those with a similar configuration : - Azerty / FR keyboard - using a Firefox / Mozilla based browser I could not use NoVNC to connect on my VM's consoles to type passwords : Qwerty layout and all figures and special char where not...
