Latest activity
-
Bbitranox replied to the thread Switch from Host to x86-64-v3.I dont understand what You want to tell me. I need Hyper-V on that Machine, but want to use the fastest CPU type possible. Maybe its possible to switch off the VBS (virtualization based security) and still use Hyper-V Guests. VBS...
-
Gguruevi replied to the thread Shared Remote ZFS Storage.Perhaps you should read the docs: https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/During_an_ONTAP_upgrade_is_there_a_risk_of_losing_uncommitted_data_if_an_NVRAM_failure_occurs#:~:text=or SnapMirror Synchronous)-,Answer,is typically about 10...
-
SSteveITS replied to the thread [SOLVED] Users Connecting to Minecraft Server in VM Cause ProxMox Server to Lose All Internet.As briefly mentioned above, check for https://duckduckgo.com/?q=proxmox+e1000e+hang
-
DHi, ich habe kürzlich Debian 13 mit Cloud-Init installiert. Wenn ich die VM starte erhalte ich immer die Meldung: [36.345982] systemd-journald[305]: Time jumped backwards, rotating. Was läuft da immer schief? Liegt es eine meine Konfiguration?
-
JJsingh posted the thread proxmox kernel 6.17 preventing update of pinned kernel 6.14 in Proxmox VE: Installation and configuration.I am using NVIDIA VGPU driver version 570.172 which works with kernel 6.14 but does not compile with 6.17. I have pinned kernel 6.14, but whenever I install soming for ex linux-cpupower using apt, the 6.17 config error does not allow 6.14 config...
-
Pperfektionsloge replied to the thread [SOLVED] ZFS scrubbing does not work anymore on Kernel 6.14.11 (and cannot upgrade to 6.17.X because of NVidia).Same issue: root@pve2:~# uname -r 6.17.1-1-pve root@pve2:~# zfs version zfs-2.4.0-pve1 zfs-kmod-2.3.4-pve1 root@pve2:~# cat /sys/module/zfs/version 2.3.4-pve1
-
Pperfektionsloge reacted to mlazzarotto's post in the thread [SOLVED] ZFS scrubbing does not work anymore on Kernel 6.14.11 (and cannot upgrade to 6.17.X because of NVidia) with
Like.
Same issue, but on 6.17. Linux cube 6.17.2-1-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-1 (2025-10-21T11:55Z) x86_64 GNU/Linux -
OOverstep3424 replied to the thread [SOLVED] PBS 4 having problems with API tokens?.I know this issue is resolved however I wanted to include my findings. Mainly because I found this post useful to me in narrowing down my issue. My setup and versioning: PBS 4.1.4 LXC (docker) homepage v is 1.10.1 The curl command from...
-
-
SSuBun7 replied to the thread [SOLVED] Users Connecting to Minecraft Server in VM Cause ProxMox Server to Lose All Internet.No, it says "no content".
-
SSteveITS reacted to hayvan's post in the thread Can only boot once a Clonezilla Windows Vista image with Like.
Success! What I did : * started in normal mode * By iteration I found out virtio 0.1.173-3 could install almost of its contents, specially the qemu agent * I installed all possible virtio drivers and removed all drivers or installed sofwtares...
-
Uuzumo replied to the thread Nested virtualization doesn't work. How do I convert libvirt xml to proxmox?.I believe the Hyper-V settings are similar to those described below. https://www.qemu.org/docs/master/system/i386/hyperv.html Specifying something like hv_relaxed=off should make it usable. qm set <vmid> -cores 16 qm set <vmid> -args '-cpu...
-
Hhayvan replied to the thread Can only boot once a Clonezilla Windows Vista image.Success! What I did : * started in normal mode * By iteration I found out virtio 0.1.173-3 could install almost of its contents, specially the qemu agent * I installed all possible virtio drivers and removed all drivers or installed sofwtares...
-
Kkacvegas posted the thread Nested virtualization doesn't work. How do I convert libvirt xml to proxmox? in Proxmox VE: Installation and configuration.Hello, I have a problem with nested virtualization + GPU passthrough. Attempting to run nested virtualization in a Windows 10 VM results in the virtual machine crashing (the QEMU log only states that the virtual machine hung and had to be shut...
-
DDavidegb replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.I'm also suffering this bug: Hardware: Proxmox host CPU: AMD Phenom II X6 1090T (AM3) Proxmox host RAM: 32GB ECC DDR3 NVMe: WD Black SN7100 1TB (VMs/LXC storage) NFS server: Debian 13 VM running inside the same Proxmox host, ZFS RAIDZ1 4×14TB...
-
PI mean that i remove manually the backup on the PBS which have the verify state failed, this night the backup was succeed from the pve: 103: 2026-02-17 22:53:33 INFO: 99% (1.5 TiB of 1.5 TiB) in 1h 53m 30s, read: 138.1 MiB/s, write: 3.0 MiB/s...
-
TTurreterror42 replied to the thread Can't setup NIC PCIe pass through.I forgot to say that I can passthrough another card for example a PCIe card with USB ports but the Intel I225V NIC doesn't work
-
TTurreterror42 posted the thread Can't setup NIC PCIe pass through in Proxmox VE: Installation and configuration.Hello everyone, I'm currently facing an issue with getting PCI passthrough to work on my HP ProLiant ML350 G6 server. I’m running Proxmox and using an Intel I225V NIC for passthrough. Despite following all recommended steps, I’m still...
-
OOnslow replied to the thread [SOLVED] Users Connecting to Minecraft Server in VM Cause ProxMox Server to Lose All Internet.When you click on the ">" arrow visible at the very right side of your screenshot, isn't there more information than already visible "unexpected status"?
-
Ggfngfn256 replied to the thread Can only boot once a Clonezilla Windows Vista image.Try adding a Windows Vista MEDIA/ISO & select that as first boot device, then choose to "Repair".
-
OOK, after some googling and trying I've managed to get things working as expected. /etc/network/interfaces Notes: All nics in the bond have to be configured as slaves. The order of the bond-slaves is importent "master slave slave". bridge-ports...
