Latest activity
-
SteveITS replied to the thread Ceph rbd du shows usage 2-4x higher than inside VM.Sorry meant to say, no snapshots on any VMs. -
spirit replied to the thread Ceph rbd du shows usage 2-4x higher than inside VM.do you have any snapshot in theses vms ? (because triming on snapshot will take more space instead reduce the space) -
Aaluisell posted the thread acme client automation from opnsense upload certificate in Proxmox Backup: Installation and configuration.Hi, I'm actually trying to get OPNSENSE though ACME CLIENT automation to upload let's encrypt certificate to PBS. (I got it working properly for PVE). I found script used at git repo fo acme...
-
Pproxuser77 replied to the thread Backup Recommendation.Besides the potential for performance issues and differing drive capacities, where only the capacity of the smallest drive would be applied to all others in a pool/array, I'd say it's fine doing that in a home lab. But more importantly, RAID is...
-
PPPatla replied to the thread Automated install script for OpenWrt in a Container on Proxmox!.This script worked great for me. I created it when RC4 was the latest version of 25.12.0-RC4. I tried updating to 25.12.0-RC5 with OWUT and also attended sysupgrade but both fail. I now tried with with 25.12.0 and it also fails with the error...
-
SteveITS posted the thread Ceph rbd du shows usage 2-4x higher than inside VM in Proxmox VE: Installation and configuration.I've noticed VMs that show much higher usage via rbd du than in the VM, for example: NAME PROVISIONED USED vm-119-disk-0 500 GiB 413 GiB vm-122-disk-0 140 GiB 131 GiB Inside the VM, df shows 95G and 63G used space...
-
Ssegot replied to the thread PVE 9.1 running on a BOSS-S1 causing I/O errors and filesystem remounts as R/O.Alright, I have some progress. On one of the failing nodes. BOSS-S1 adapter card: DriveModelFirmware 0SSDSCKJB240G7R DL43 1SSDSCKKB240G8R DL6P I upgraded the firmware on drive 1 from DL6P to DL6R and the errors are gone :D Firmware...
-
Wwhydoentitwork replied to the thread [SOLVED] Proxmox VM combining tagged and untagged VLAN traffic (host behind Unifi switch).Yes, I mean connecting one VLAN-tagged NIC to a VM works as expected, the VM is then in the respective VLAN. Connecting one untagged NIC to a VM also works, the VM is then in the native 1610 VLAN, same as the proxmox host. What also works is...
-
AAndD posted the thread Configure migration settings network to share the same network of Ceph in Proxmox VE: Networking and Firewall.Hello everyone! I was wondering if someone could give me a couple tips on the configuration for the network used by Migration Settings, to migrate VMs from one node to the other. We have a cluster with 15 nodes which are configured with 2...
-
l.leahu-vladucu replied to the thread [SOLVED] Proxmox issue RTX2080Ti and RTX5090.Glad to hear that you issue has been solved! Just to confirm, as far as I can understand, the issue has been fixed by a combination of BIOS update + OVMF in the VM, correct? For future reference (in case similar issues will arise), could you... -
LLerryV2 replied to the thread PVE 9.1 running on a BOSS-S1 causing I/O errors and filesystem remounts as R/O.The Intel drives all show a 0% life left. Its a new to use server install so when the drives come Ill swap them out and see what happens. Thanks.
-
Ssegot replied to the thread PVE 9.1 running on a BOSS-S1 causing I/O errors and filesystem remounts as R/O.Should have looked closer at the SSDs in the clusters. Just noticed what Cyberishf mentioned above. The working hosts are using MICRON - MTFDDAV240TCB drives. While the ones with the issue are using INTEL - SSDSCKJB240G7R drives. Guess the only...
-
AAlexHK reacted to Johannes S's post in the thread [SOLVED] Does Proxmox VE support host–guest time synchronization similar to VMware? with
Like.
Or use the same ntp server for the host and guests -
JJimmy Brown posted the thread Backup Recommendation in Proxmox Backup: Installation and configuration.Hi everyone, This is my second post here, and I’m looking for some advice and guidance on storage and RAID options for my main Proxmox server. I’m currently running Proxmox as my primary homelab host. It runs my main Pi-hole instance along...
-
Ddoomedramen replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.I am on 9.1.6 pve-container is 6.1.2 (which was the thing that had the update that initially started causing me issues. `(dpkg -l | grep pve-container)`
-
AAlexHK replied to the thread 24h Status report.I just checked my daily mail reports for the past few days. 550 Incoming Mails: I believe this includes mail delivery attempts. So in your case 550 connections tried to deliver mail, 548 rejected as junk (ie. via DNS-BL etc) - 2 mails delivered...
-
SScottFS replied to the thread automated install via PXE boot.How are you dealing with the 2GB iso limit? I'm seeing IPXE have issues with anything over 2GB. And the 9.1.5 ISO is over that limit.
-
Uudesmedt replied to the thread After disk migration, LVM failed to deactivate.Hello, There is a known bug : https://bugzilla.proxmox.com/show_bug.cgi?id=7143 Best,
-
TTErxleben replied to the thread OpenWRT-Gateway Failover per VM.Nicht ohne Addon. Ganz trivial ist die Einrichtung auch nicht. Könnte man einfach eine Liste von Gateways, ähnlich die der DNS-Server, angeben hätte mir das am besten gefallen. Geht aber leider nicht. So muss ich die Wahl einer WAN-Route eben mit...
-
SSteven-b replied to the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2.Why don't you look into LINBIT / Linstor (DRBD)? > https://linbit.com/blog/linstor-setup-proxmox-ve-volumes/ It's pretty easy to setup if you need a 2 cluster setup and have small device for quorum, we combine this quorum with Proxmox Backup Server.