And 2.5.13.3024 is the version that I'm running. Interesting.
So maybe its not a M.2 SATA issue but a firmware BOSS issue.
Not sure how feasible it is to downgrade, but my first try will be the Micron m.2 SATA drives
If those dont work I might...
As far as I know, on windows this is a "domain policy" pushed by the Active Directory. The windows domain policies don't work on anything but windows. Technically you can change the policy (GPT editor) to change the NTP server to something other...
Dem kann ich nur widersprechen. Ich würde sogar so weit gehen und unterstellen, dass der Account @Bu66as teilweise vollkommen automatisiert "antwortet".
I ran in to the exact same issue today when upgrading two 4 node clusters that use BOSS-S1 adapters for the OS.
However, only the second cluster gets R/O error :oops: Servers are PowerEdge R740.
I'm still investigating but so far the only...
Understood.
I'll keep in mind the 72h recommendation.
I'll talk to the other admins about the recommended procedures regarding this situation.
Thank you very much for this discussion and recommendations.
What version are you on? 9.1.6 seams to have improved things, but I don't know if it is 100% resolved.
I have a Dell t440 with TrueNAS and Plex in VMs. Yesterday one of my friends got "Please check that this file exist and the necessary drive...
SOLVED!
ASPM was active.
I then disabled it entirely via kernel parameter.
File: /etc/default/grub
Changed:
GRUB_CMDLINE_LINUX_DEFAULT="quiet pcie_aspm=off"
@fstrankowski, ja fair enough — ich neig dazu zu ausführlich zu antworten, da hast du nicht ganz unrecht. Versuch ich in Zukunft kürzer zu halten. Ist jedenfalls alles handgeschrieben, auch wenns vllt nicht so aussieht ;)
Kannst Du bitte endlich aufhören hier jeden Tag hier Kistenweise AI Slop abzuladen. Langsam geht mir das wirklich auf den Keks. Ich dachte Du verstehst den Wink mit dem Zaunpfahl aber irgendwo ist auch mal Feierabend.
Regarding mdadm:
https://pve.proxmox.com/wiki/Software_RAID#mdraid
I agree with both gurubert and onslow that ssd is the prefered way to go for a PBS datastore but backup on hdd is still better than no backup. One possible workaround around the...
Has this just "magically" gone away for people or just me?
I have had a huge media conversion job running for the past 8 hours and it has not hung once (normally it cant do more than 30 mins).
This thread may be helpful: https://forum.proxmox.com/threads/boot-from-san-multipath-boot-disk-proxmox-installation.164098/
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
Kannst Du bitte endlich aufhören hier jeden Tag hier Kistenweise AI Slop abzuladen. Langsam geht mir das wirklich auf den Keks. Ich dachte Du verstehst den Wink mit dem Zaunpfahl aber irgendwo ist auch mal Feierabend.
Depending on the needs of the original poster, it may work enough well :) .
I'm writing this from my own experience in a lab. So, @whostolemyname , don't feel discouraged. If you have no faster disks at the moment, use HDDs. Slow backup is better...
Welcome, @whostolemyname
I'm not commenting on your particular hardware. Just generally. A few points, in no particular order.
1) Keeping the backups on the same disks as the primary data is not very safe.
2) Though not optimal, you can build...
Thanks again everyone for your detailed answers.
So far Blockbridge still sounds very interesting and when the time comes I or someone from my team might reach out to the Blockbridge Team for more information.
For some of our customers who dont...