Depending on the needs of the original poster, it may work enough well :) .
I'm writing this from my own experience in a lab. So, @whostolemyname , don't feel discouraged. If you have no faster disks at the moment, use HDDs. Slow backup is better...
you can check if we already have a feature request in our bugtracke or not. if we do, please chime in
https://bugzilla.proxmox.com
without checking in detail, fetching that info would mean extending the storage plugin API, so a little bit more...
Danke für die Nachricht. Die meisten dieser Befehle finden sie im Verlauf des threads. aktuell funktioniert der DNS dienst auch wieder, nur die Proxies sind nicht erreichbar. ich habe das update jetzt auch im haupt-post hingeschrieben
Hallo @Raoul1963, reguläre Paket-Updates (apt update && apt dist-upgrade) könnt ihr bedenkenlos machen — der Kernel-Pin bleibt davon unberührt. Es werden zwar ggf. neuere Kernel-Pakete installiert, aber gebootet wird weiterhin in den gepinnten...
Hi,
You can use the Permission editor in the webinterface, which provides you with a list off possible ACL paths.
For when the Proxmox VE really only does backups and optional restore of their own backups, you could use the DatastoreBackup role...
You're absolutely right! That command worked perfectly, and I am able to successfully retrieve the actual disk usage. Thanks for the tip.
However, I have a follow-up question: Is there any way to have this information displayed directly in the...
I removed the subscription nag script but still no luck. Problem is that the whole system is in a stuck state. I am not sure what to do.
I tried to check the service status using systemctl status pve-cluster but nothing returns. After a lot of...
Hi everyone, I've been encountering severe performance issues recently when backing up a few specific VMs to my PBS.
Most of my VMs back up without any issues. However, VMID 107 and two other VMs consistently hang during the process. The...
Just in case somebody runs across this, I was able to fix it by doing this. I made the mistake of updating in nano /etc/default/grub and not the correct location /etc/kernel/cmdline
I added quiet intel_iommu=on iommu=pt
nano...
I have some configuration guide for RHEL or SUSE both solutions include "native" multipath configurations upon installation
I have nothing about ubuntu/debian ...
Hallo @Raoul1963, @Karl_OS,
Das ist ein bekannter Regression-Bug im Kernel 6.8.12-9-pve, der Intel e1000e NICs betrifft — ihr seid also nicht allein damit.
Zum Thema Updates: Reguläre Paket-Updates (apt dist-upgrade) könnt ihr weiterhin machen...
Just moved my Windows Server 2025 Fileserver with an bigger attached iSCSI Drive (9TB) from VMWare to my Proxmox VE and ran into this problem. Just downgraded the driver to 0.1.271 and hoping that it stays stable. Got many angry tickets in the...
Hallo @3n0x, so lässt sich das leider nicht eingrenzen — da brauchen wir deutlich mehr Infos:
Proxmox VE Version (pveversion -v)
Netzwerk-Konfiguration (cat /etc/network/interfaces)
Zwischen welchen Endpunkten ist es langsam? (VM↔VM, VM↔Host...
Hallo @rothkraut, das automatische Zurückmigrieren nach einem Ausfall ist über HA-Gruppen mit Node-Prioritäten möglich.
Beispiel-Setup:
Gruppe "brandabschnitt-a": Node1 (Priorität 2), Node2 (Priorität 2), Node3 (Priorität 1), Node4 (Priorität...
Hallo @nimblefox, das ist ein klassisches DNS-Problem im Container — er kann keine Hostnamen auflösen. Bitte poste die Ausgabe folgender Befehle im Container:
cat /etc/resolv.conf
ping -c 3 8.8.8.8
ip a
ip r
Der ping auf die IP zeigt, ob...
Dass die MSA-Belegung nach Scrub-Abschluss unverändert bei 94% steht obwohl ~500 GB per UNMAP gemeldet wurden, ist auffällig. Die Datenträgergruppenbereinigung ist primär ein Integritätscheck (Parity-Verify) — die UNMAP-Verarbeitung läuft davon...
Hallo @Raoul1963, @Karl_OS,
Das ist ein bekannter Regression-Bug im Kernel 6.8.12-9-pve, der Intel e1000e NICs betrifft — ihr seid also nicht allein damit.
Zum Thema Updates: Reguläre Paket-Updates (apt dist-upgrade) könnt ihr weiterhin machen...