Latest activity
-
OOa4McvMTSo replied to the thread [SOLVED] Unable to update Proxmox: "Network is unrechable" despite the web gui still being accessible.It didn't cross my mind at first because when I first applied the change, there was no obvious change in functionality, and other bridges were still dynamically pulling IP addresses from the gateway without needing it to be manually specified...
-
JJoe77 replied to the thread Langsame 4k Performance in Windows 11 VM.Jetzt habe ich heute mal eine neue VM mit W11 aufgesetzt RAM etc alles gleich, als CPU den V2-AES und die 271er IO Tools genommen. Die Windows Updates drauf und dann nur und ausschließlich Lexware. Leider ist die Latenz immer noch etwas über 2ms...
-
Aandreisrr replied to the thread Moving VMs with snapshots.And cloning will clone the snapshot as well?
-
Aandreisrr replied to the thread Whole disk backup every time on stopped VM.Is there a way to reduse storage read I/O load in this scenario?
-
Wwoma reacted to spirit's post in the thread How to Enable Continuous Time Sync Between QEMU Guest and Host with
Like.
never tried it but : https://docs.redhat.com/en/documentation/red_hat_enterprise_linux/7/html/virtualization_deployment_and_administration_guide/chap-kvm_guest_timing_management To enable the PHC device, do the following on the guest OS: Set... -
Mmicbanand replied to the thread Kernel regression in PVE 8.4.16.is the asm1166 on latest 241224 firmware?
-
Rrothkraut posted the thread [SOLVED] HA-Migration auf vorherige Node in Proxmox VE (Deutsch/German).Moin zusammen, bin relativ neu in Proxmox und möchte unser VMWare Cluster nach Proxmox migrieren. Bin jetzt dabei mich mit HA und den Affinity Rules zu beschäftigen. Folgendes Scenario: 4 Nodes auf 2 Brandabschnitte verteilt, dazu noch ein...
-
CChrisTG74 replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.So, did anyone yet measure the performance-improvements? Is it noticeable in production?
-
Wwhostolemyname posted the thread Proxmox setup with RAID 1-configuration on USB attached storage in Proxmox VE: Installation and configuration.Hello everyone I am just fiddeling around with learning to operate Proxmox on a Asus NUC, that has been bought recently to set up a backup server. It consists of an internal NVMe and an ICYBox with 4 3,5" Harddisks of 8TB each, the Box being...
-
-
RRoxyProxy reacted to bbgeek17's post in the thread Storage for small clusters, any good solutions? with Like.
@alexskysilk You're right to call that out. "Very small environments" was a poor choice of words on my part. The distinction I was trying to make isn't about node count, it's about business value. We have customers running three node clusters...
-
cheiss replied to the thread LAG / VLAN on node setup.Just to be clear, this only works with the automated installation. This is documented in the guide for that in the respective section: https://pve.proxmox.com/wiki/Automated_Installation#First_Boot_Hook_Section The provided script is... -
RRoxyProxy reacted to alexskysilk's post in the thread Storage for small clusters, any good solutions? with Like.
This implies that the operator has both the skill, experience, and the wherewithal (not having a dozen other responsibilities) to understand the docs and apply them. Ceph is not attractive at the low end precisely because it requires engineer...
-
RRoxyProxy reacted to bbgeek17's post in the thread Storage for small clusters, any good solutions? with Like.
Hi @RoxyProxy, Since questions around pricing, company future, and so on came up, we felt it was appropriate to chime in. First, we'd like to thank the Blockbridge customers earlier in the thread for sharing their thoughts. To be honest...
-
CChrisTG74 replied to the thread LAG / VLAN on node setup.A last question: Is it okay to integrate the script into the installer-ISO? If so, were do I actually put it and how does it have to be named so that the installer finds and executes it? This is something the docs are not really clear about IMHO...
-
shanreich replied to the thread Ceph 3-node cluster with direct links.I'd prefer using the interfaces separately - some users have ran into problems with using bonds + OpenFabric / OSPF. The hashing configuration can be done via the ECMP sysctls, since it is a kernel function - fib_multipath_hash_policy is probably... -
Ffmaurer replied to the thread SDN overlay network in routed mesh setup.For the better understanding of my target, I can reduce the setup to a single node - typical home setup: Current example setup: - vmbr0: 192.168.178.250/24 - connected to WAN (gw: 192.168.178.1) - VM100 has 192.168.178.100/24 configured and is...
-
PPerG replied to the thread Ceph 3-node cluster with direct links.Great, so using SDN/OpenFabric we do not configure any IP addresses in Linux on loopback or physical interfaces. Instead, the subnet for the OpenFabric (with subnet mask) is configured in the "Create OpenFabric" dialog box, and then each node is...
-
bbgeek17 replied to the thread No web GUI after upgrade from 9.0.11 to 9.1.6.Hi @Kordian , 99% of similarly reported issues were related to community script hack to remove subscription reminder on login. Recent versions of the hack implement a bash script hook that executes automatically and pulls/patches the files after... -
Ssection1 replied to the thread [SOLVED] Spam Custom Score fails when using OIDC.thanks mfederanko! i close this thread.
-
Uunsichtbarre replied to the thread [SOLVED] Does Proxmox VE support host–guest time synchronization similar to VMware?.I would look into something like this: Time Machines Relatively inexpensive and create a NTP/PTP server on your LAN. Failing that, in the past when I have faced this challenge, I often prefer to create VMs as NTP time server. It is not accurate...
