Latest activity
-
KKhensu replied to the thread "qm shutdown 100 &" will cause logout.Hey Bernhard, I just tried it on my machine and it behaved the same. (PVE 9.1.6) This worked for me, can you give it a try? systemd-run qm shutdown <VMID> You also could add --quiet after systemd-run to get no output.
-
Ccpaglietti replied to the thread ZFS mirror on 2x Crucial T705 (PCIe 5.0) causing txg_sync hangs under write load – no NVMe errors in dmesg.Temp: 36° original asus heat sinks.
-
Aandreisrr reacted to UdoB's post in the thread Whole disk backup every time on stopped VM with
Like.
No. It is read completely, to seek and find modified chunks. Look at "write: 0 B/s" in every line ;-) In a simplified nutshell: the source is read chunk by chunk. The chunk is hashed. That checksum is sent to the PBS. The PBS notices that a... -
Aandreisrr reacted to SteveITS's post in the thread Whole disk backup every time on stopped VM with Like.
Stating the same thing slightly differently, all backups in PVE are full backups. PBS just saves one copy of each unique chunk.
-
Mmaze-m replied to the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen?.Das schaut jetzt so aus: root@pve:~# zpool status pool: Datengrab state: ONLINE status: Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all...
-
Mmaze-m replied to the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen?.Okay, ich bin jetzt der Empfehlung gefolgt und hab den Pool einmal in einen neuen Pool "umbenannt" bzw. importiert und dann wieder in 'Datengrab' zurück "umbenannt" bzw. importiert. Ist zwar nicht schön, aber selten :D: root@pve:~# zpool export...
-
Mmaze-m reacted to Impact's post in the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen? with Like.
PVE(statd) importiert den Pool wenn ein Speicher diesen referenziert. Daher die Empfehlung am Ende.
-
Bbroth-itk posted the thread "qm shutdown 100 &" will cause logout in Proxmox VE: Installation and configuration.Dear Proxmox Community, for some time I'm a bit annoyed by a strange behaviour. When running "qm shutdown" in the background, the SSH session gets terminated: root@pve:~# qm shutdown 110 & [1] 1929562 root@pve:~# logout Connection to 10.200.2.9...
-
OOnslow replied to the thread notification failed on backup code 400.Compression setting? I don't think so. I'm just searching for possible difference reason. Another idea: is the issue time- (or sequence)-related? What if you swap the jobs in time? Will the failure "follow" the job or will it stay at the same...
-
Ffermino posted the thread LXC started without waiting for snippet storage to become available in Proxmox VE: Installation and configuration.Hey there! I currently have some LXC containers that reside on a local disk, but have a hookscript residing on an external CIFS/SMB mount (managed through proxmox). Everything works fine, except than when the node goes through a reboot the...
-
Mmaze-m replied to the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen?.Moinsen! Okay, ich hab den zpool export Datengrab versucht und direkt danach einen zpool import -d /dev/disk/by-id Datengrab..... Ich bekomme dann allerdings die Meldung, dass ein Pool 'Datengrab' bereits exisitiert: root@pve:~# zpool export...
-
Ggralf replied to the thread notification failed on backup code 400.Hi there, I saw that and by the way dont know how to change it, even though, the job succedes. But, do you think this has something to do in not getting nottifications from this job?
-
G_gabriel reacted to Dunuin's post in the thread When restore vm backup disk was removed from vm with Like.
The config file is already included in the backup archive. How I solved it: You can write a note to each VM. I added the "qm set ..." commands as a note. So after a restore I just copy the commands from the restored note and paste it into the...
-
Pph4zed replied to the thread extended LVM, now it's 100% used?.This is all that there is : TASK ERROR: unable to create VM 108 - not enough free space (0 < 528)
-
-
Ppepsov replied to the thread PVE8 Intel I350-T4 NIC driver issues.The REALLY annoying thing is - I am certain it's not a hardware issue, because these same NICs work fine in 5.X kernels. I have booted the machine in Rocky9/Alma9 Linux with 5.15 kernels, as well as ProxMox 7 - all good.
-
Pproudcanadianeh posted the thread Best practice for stretched ISCSI volume? in Proxmox VE: Installation and configuration.New to PVE, coming here from VMWare. Hoping for some advice as to the best way to setup our ISCSI configuration on our storage arrays. For context, we have two Pure storage arrays using ISCSI in an Active-Cluster configuration (Single stretched...
-
Aaubreybailey replied to the thread RTX 5080 (Blackwell GB203) VFIO Passthrough Failing on PVE 9.1 / Kernel 6.17 — Has Anyone Solved This?.kernel 6.17 changed ... something! chatbots suggest that this was "Unity Map" for whatever that's worth. The hint for me was "Firmware has requested this device have a 1:1 IOMMU mapping" in journalctl -k We have similar Gigabyte boards (mine is...
-
fstrankowski replied to the thread [SOLVED] /var/log/atop is 77GB large.atop is not part of Proxmox. So whatever you're doing, stop doing it :-) -
Nno_not_my_lvm replied to the thread [GUIDE] Install Home Assistant OS in a VM.2 years later and this post is still helpful. Thank you OP!
-
Nn0x0n posted the thread [SOLVED] /var/log/atop is 77GB large in Proxmox VE: Installation and configuration.I'm on PVE 9.1.4 and just noticed that /var/log/atop is at 77GB large. This is on a 3-node cluster with 7 LXCs. Logrotation seems to work, keeping 28 days worth of logs: Today is March 1st and the oldest file is from Feb 1st. Gut feeling tell me...
