I'd suggest looking up those apps and trying to find Debian install instructions.
If there are instructions to get them running on Debian (or at least nothing that says they don't run on Debian), you should be fine with a Debian LXC.
Anything...
Hi all,
yesterday i migrated my proxmox environment to a new server
HP Elite Mini 600 G9 with 32GB DDR5, 2x 1TB NVMe drives and I5 13500 CPU.
Installed the 9.1 from usb stick, without any problems. Migrated all my VMs to the new server without...
Hello all,
with the activated netconsole no additional messages are shown. It seems the VM is loosing all hardware during the failure, so no message can be written, neither to console, nor to disk or network.
My next try will be to disable the...
Update – possible root cause identified
After several freezes under ZFS load (snapshots and vzdump), I forced both NVMe slots from PCIe Gen5 (32GT/s) to Gen4 (16GT/s) in the BIOS.
Since downgrading to Gen4:
No more tasks stuck in D state
No...
Hi kmentzelos
I'm already using PBS and I'm very happy because it works very well. With a few tweaks, I can restore the infrastructure from scratch in a few hours (all you need is another server, enough storage, and a backup repository). If it...
Das ist nicht paranoid. Ich habe gerade vor 2 Tagen wieder einen neuen Account gebannt, der in seinen ersten 3 Beiträgen nur mit AI Slop geantwortet hat. Nicht im "Redefluss" des Threads, 100% KI generiert. Davon gibt es hier noch mehr [..], auch...
Richtig. Da geht nur zusätzliche Energie drauf.
Mir fallen seit einem halben Jahr viele Postings auf, die Antworten auf uralte Fragen geben. Also korrekte und wohl hilfreiche Antworten auf Fragen von vor einem, zwei oder drei Jahren. Und zwar...
Appreciate your comments and hints.
I agree my setup is a bit border line mainly because the W11 VM can see partition nvme0n1p5 with the storage space for the Linux VMs.
To me it was quite convenient to still be able to boot on W11 by itself in...
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory'...
Hello,
I hope you have already found a solution. If not, please provide the network configuration files from both the host and the guests.
From PVE
cat /etc/network/interfaces
From the VMs: ip a and network config file.
[0]...
Hi all,
I have been very fortunate to acquire a SuperMicro SSG-2029P-DN2R24L / SuperStorage 2029P-DN2R24L chassis, with 2x nodes in one chassis sharing a bunch of NVMe storage. The interesting thing about this system is that the two independent...
Just to complete your overview:
I've tested the documented https://pve.proxmox.com/pve-docs/chapter-pve-firewall.html#_standard_ip_set_span_class_monospaced_management_span and was surprised that adding the IPlist "management" (name it exactly!)...
First real post to this forum, so please be gentle.
The Hardware: SuperMicro 846 36xHDD chassis with dual 1250W PS, Gigabyte MZ72-HB2 dual-socket AMD motherboard w 256GB ECC RAM, 2xEPYC 7F52 16-core processors, LSI SAS2308 HBA #1, 4x Samsung...
When setting up a Proxmox cluster, you need to ensure that certain ports are open to allow for proper communication between the nodes. In addition to the standard ports 22 (SSH) and 8006 (Proxmox web interface), you should open the following...
@gralf are you sure the backup jobs have the same config?
In the log the options not only have other order and the contents, but also they don't match the screenshots.
E.g. it the screenshots, Compression fields are the same: ZSTD.
While in the...
I updated my cluster yesterday and after rebooting the 2nd server and pfsense failed back to the upgraded node, I no longer could browse the internet, all my iOT devices lost connection to the internet. Pinging websites on the pfsense cli works ...