Latest activity

  • K
    Ich würde dir vom umstellen auf vollblocksize=4k abraten. Bei RAIDZ1 mit ashift 12 (Default), würdest du nur 50% der Kapazität verwenden können. RAIDZ ist tricky und etwas komplizierter zu verstehen. Da kommt Padding mit ins Spiel. Bei 16K...
  • cwt
    4K volblocksize würde ich für die VM nicht nutzen, das bringt meistens nur overheadb bei Metadaten. Dann eher 8K oder 16K. Für PostGRES (ecoDMS) und Firebird/MSSQL (Lexware) wäre 8K "perfect aligned", bringt aber etwas mehr an Metadaten mit sich...
  • J
    Jetzt habe ich mal für den Pool das sync deaktiviert. Die Random 4k Werte der VM haben sich dadurch quasi nicht verändert. Wird das erst nach einem Neustart übernommen?
  • S
    Thank you for suggesting this information.
  • J
    OK die Blocksize steht auf 16k. Somit ungünstig. zpool get ashift ZFS-NVMe NAME PROPERTY VALUE SOURCE ZFS-NVMe ashift 12 local zfs get volblocksize ZFS-NVMe/vm-201-disk-1 NAME PROPERTY VALUE SOURCE...
  • B
    Hallo @Joe77, die CrystalDiskMark-Werte bestätigen das Problem — die sequentiellen Werte sind hervorragend, aber 4K Q1T1 mit ~35/28 MB/s ist für drei PM983 NVMe im Verbund deutlich zu wenig. Die Ursache ist, wie @cwt schon angedeutet hat, das...
  • P
    After it didn't reoccur for almost 2 weeks, last night it happened again. Disabled all the changes I made for GPU passthrough to see if that solves it
  • L
    The 'detected undelivered mail' message is usually the result of the new security checks on malformed MIME parts. If you see 'message has ambiguous content' or 'unable to parse message' in your logs, that is the culprit. You can get these moving...
  • B
    Hallo @Joe77, die CrystalDiskMark-Werte bestätigen das Problem — die sequentiellen Werte sind hervorragend, aber 4K Q1T1 mit ~35/28 MB/s ist für drei PM983 NVMe im Verbund deutlich zu wenig. Die Ursache ist, wie @cwt schon angedeutet hat, das...
  • spirit
    as far I remember, virtio-net is limit is around 2millions pps by core (depend of the cpu frequency). The only way is to increase number of queue on the virtio nic. (if you are cpu limited, you should see a vhost-net process at 100% on the pve...
  • L
    Thanks for sharing the exact lines for the custom.cf file, Mudgee Host! It is a common headache when these RBLs start blocking queries after hitting the free tier limit. For anyone else running into this on Proxmox Mail Gateway, remember that...
  • J
    Danke für Deine Antwort, Zu 1: Die Kerne kann ich heute Abend mal reduzieren. Ich hatte bis gestern 12 eingestellt und in der Hoffnung dass es schneller wird mal auf 16 erhöht. Leider keine Änderung. Zu 2: Die Kernisolierung habe ich...
  • Falk R.
    Falk R. replied to the thread Proxmox für 500-1000 VMs.
    Lese mal die definition von Inkrementell. Das Inkrementell bezieht sich auf die Speicherung der Daten und die Datenmenge. Die Dirty Bitmap ist ein Zusatzfeatures, damit Inkrementell schneller geht, aber ändert nichts an der Speicherung. Nur weil...
  • N
    Usually i ask for netstat -sanu to see what can be optimized in kernel and system.
  • B
    Ich würde zuerst 3 Dinge prüfen: 1. 16 Kerne sind zu viel. Testweise mit 8, 6 oder 4 probieren. 2. Checken, ob in Win11 die Kernisolierung aktiv ist (Windows-Sicherheit/Gerätesicherheit/Kern-Isolierung/Speicher-Integrität) und die mal...
  • K
    Hi PG1024, I made several test using iperf with this result: Server VM, Ubuntu 24.04, 4CPU, 4GB RAM, PVE node 1 $iperf -su Client 1 Physical, Ubuntu 25.04, 1Gbps LAN $iperf -c 192.168.1.69 -u -t 120 -b 500M [ ID] Interval Transfer...
  • J
    Ja die NVMe dürften Onboard angeschlossen sein. Der Controller ist drin aber wie er an der Backplane angeschlossen ist habe ich nicht geprüft. Hier mal die Screenshots vom Storage:
    • Storage.png
    • ZFS.png
  • E
    I have dealt with similar high PPS UDP cases, and 100k to 200k packets per second is usually the real problem, not the Mbps. Small packets kill you with interrupt overhead and softirq saturation. Before jumping to passthrough, I would check vNIC...
  • cwt
    Und wie sieht Dein storage setup aus?
  • J
    Danke für die Antworten. Hier die Config: agent: 1 balloon: 0 bios: ovmf boot: order=scsi0;ide2 cores: 16 cpu: x86-64-v4 efidisk0: ZFS-NVMe:vm-201-disk-0,efitype=4m,pre-enrolled-keys=1,size=1M machine: pc-q35-9.2+pve1 memory: 16384 meta...