I can confirm that the issue doesn't occur anymore after restarting source VMs with new version of pve-qemu-kvm - live migration works fine without crashes.
Solved via https://forum.proxmox.com/threads/smtp-banner-check-reverse-dns-does-not-match-smtp-banner.101161/
and https://forum.proxmox.com/threads/smtp-banner-check-reverse-dns-does-not-match-smtp-banner.101161/
On the first node:
1. cp...
Just a shot-in-the-dark, as I don't use IPFire:
I note that in the VM's config's (103 & 104) you have the GA enabled, but in the above image you posted, it appears the GA is not running in the VM. It would appear (Google search) that the GA can...
@Stefan123 wenn ihr ein dediziertes Ceph-Cluster nutzt und die Compute-Nodes nur als Hypervisor laufen, dann brauchen die Nodes lokal keine schnellen Platten für die VM-Workloads — die I/O läuft ja komplett übers Netzwerk zum Ceph-Cluster...
Bei drei NVME fährst Du wahrscheinlich RAIDZ? Das ist mit die schlechteste Variante als VM storage. Gerade bei 4K sieht man den Unterschied zu mirror bzw striped mirror.
Lexware ist generell keine Raketensoftware. Beides zusammen mit 2...
Hi Jonas,
after mentioned update (dist-upgrade, not cherry picking that one) network settings are back to "yes/no" and OSD flags have checkboxes.
I had and have no console issues at all.
Linux guests only, most of them using BIOS and a few...
Hallo Joe,
könntest du von der VM bitte mal die Konfiguration schicken (PVE Shell)?
qm config <VMID>
Hast du die Best Practices befolgt?
https://pve.proxmox.com/wiki/Windows_11_guest_best_practices
(Falls nicht und du machst das, nimm bitte...
Hallo,
meine Windows 11 VM auf der 2 Datenbanken laufen ist recht träge.
Kurze Vorgeschichte: Bis letztes Jahr hatte ich meinen Proxmox auf Consumer Hardware laufen (Intel i9 12600k, 128 GB Ram, Samsung Prosumer SSD). Einige Container und VMs...
Hey,
I don't really see a huge difference here.
Do the VMs behave all the same on every node, or only a specific one? (As Windows 2019 is working properly, I doubt it is related to HW)
The only difference I see are:
- Numa disabled (me), Numa...
Ohh, danke, das war mir nicht bewusst.
Das auslesen und hashen der kompletten Disk.
Habe ich eine 1TB disk und möchte ein inkrementelles Backup machen mit Windows Server Sicherung, TimeMachine oder ZFS send
geschieht dies sehr schnell und ohne...
Problem is, most of it just doesnt make any sense whatsoever as its just thrown in a thread without even investing time to markup the post and remove the nonsense in it in the slightest way. Please invest the time to either adequately edit...
Er liest die VMware .vmx Datei aus und schlägt vor was da drin steht. Schau dir deine Konfigurationen der VMs unter vSphere an. Das ist vSphere Default.
Hier wirfst du ganz viele Sachen durcheinander.
Bei einem 2 Sockel Server, hast du 2 Sockel...
Hi,
while the CPU is at 100%, what is the output of qm status ID --verbose and timeout 10 strace -c -p $(cat /run/qemu-server/ID.pid), both times with the numerical ID of the affected VM? Are there any tasks happening for the VM around the time...
Wenn ich sowas lese stelle ich mir die Frage ist das WLAN „wlp0s20f3“?
Wie hast du die Hardware im LAN mit Ethernet, WLAN oder GLAS?
Bitte die Ausgabe von deinem Proxmox
ip a
und die Ausgabe also codeblock hier posten
I've ended up turn off these blacklists like the other recommended, via custom.cf file, because this story repeated even if all my PMG IP addresses are in my validity.com account
More to that, points got worse
Hi, ich verstehe nicht was da nicht inkrementell ist.
Wenn man klassische Backupsysteme von Früher anschaut, da wurde bei jedem inkrementellen Backup alles gelesen.
Was du meinst ist die Dirty Bitmap, die das inkrementelle Sichern beschleunigt...
Das bringt ja nix, weil man dann kein shared Storage mehr hat.
Veeam ist nicht auf eine Diskbasierte Snapshotfunktion angewiesen, also schön klassisch LVM shared nutzen und das läuft auch mit Veeam.
Ich persönlich nutze Veeam nur noch Agent...
Das bringt ja nix, weil man dann kein shared Storage mehr hat.
Veeam ist nicht auf eine Diskbasierte Snapshotfunktion angewiesen, also schön klassisch LVM shared nutzen und das läuft auch mit Veeam.
Ich persönlich nutze Veeam nur noch Agent...