Latest activity
-
Ppjalm replied to the thread Best use of 4x NVMe drives.I see that makes sense, thx
-
Mmokrunka replied to the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5.Thanks for that. I didn't know of that option. output from your suggested commands both within the VM and the host is below. Both VMs actually show really high CPU usage of kvm inside the VMs. However, the host for the R740 also shows CPU usage...
-
Mmokrunka posted the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5 in Proxmox VE: Installation and configuration.Hi there, I have 2 servers hosting proxmox 9.1.5. They are independent. One is an older R730 with spinning HDDs, and the other is a newer R740 with SSDs. Config info below. I am doing some testing as I've just installed the R740, and I am...
-
-
BBigBadBlack replied to the thread Install on RAID-10 OR 6… That is the question.1. 6 disks 2. As much as possible. I’ll eventually buy new larger drives but I’m working with what I’ve ve got, for now.
-
Yyaserm posted the thread Proxmox VE 8.2 + Dex OIDC – How to Force a Specific Connector (Skip Connector Selection) in Proxmox VE: Installation and configuration.Hi all, I’m currently integrating Proxmox VE 8.2 with Dex (OIDC) as the identity provider, and overall the authentication flow is working correctly. However, I’m trying to determine whether Proxmox supports forcing a specific Dex connector per...
-
Eebiss reacted to fba's post in the thread How to remove VMware Tools after ESXi → Proxmox migration (Windows) with
Like.
I know, I am late, but regardless here is the way I prefer: make a backup of the vm install VirtIO drivers and qemu guest agent make VirtIO storage driver ready using https://github.com/croit/load-virtio-scsi-on-boot migrate uninstall VMware... -
Kkarlm reacted to alexskysilk's post in the thread SAS pool on one node, SATA pool on the other with Like.
actual errors would be useful- this can refer to the zfs pool or the storage pool in pve. No. each pool must have a different name on the same host. same goes for pve stores.
-
Kkarlm reacted to alexskysilk's post in the thread SAS pool on one node, SATA pool on the other with Like.
pvesm remove SATAPool out of curiosity- why do you keep bringing up the other node? are they clustered? if clustered, dont delete the store; you need to go to datacenter-storage and make sure you EXCLUDE the node that doesnt have that pool in it...
-
Kkarlm reacted to alexskysilk's post in the thread SAS pool on one node, SATA pool on the other with Like.
make sure that only the node that actually has this store is in this box: also, you need a third node or qdevice in your cluster or you can have issues if any node is down.
-
Kkarlm reacted to alexskysilk's post in the thread SAS pool on one node, SATA pool on the other with Like.
correct. and it doesnt have to be a full pve either. see https://pve.proxmox.com/pve-docs/chapter-pvecm.html#_corosync_external_vote_support
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Thanks again for all your help!
-
Mmaze-m replied to the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen?.@Johannes S : Zunächst einmal vielen lieben Dank dir für die wirklich sehr ausführliche Erklärung! Ah, das hat soweit geklappt, allerings habe ich nun wirklich '/dev/sdf' bei mir stehen :(... Kann ich das noch irgendwie ändern? root@pve:~# zpool...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.correct. and it doesnt have to be a full pve either. see https://pve.proxmox.com/pve-docs/chapter-pvecm.html#_corosync_external_vote_support
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.AHA! Thanks a bunch! My third node could be just a laptop or an old server with nearly no storage, right?
-
Aalexskysilk replied to the thread Evaluating ProxMox and failing on UEFI.https://forum.proxmox.com/threads/proxmox-7-0-failed-to-prepare-efi.95466/
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.make sure that only the node that actually has this store is in this box: also, you need a third node or qdevice in your cluster or you can have issues if any node is down.
-
-
news reacted to GMBauer's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
Das möchte ich unterstreichen. Diese verlinkte Anleitung auf Youtube ist ja wirklicher Unsinn... Ja, ich verzweifle wirklich. Können junge Menschen geschriebenes nicht mehr verstehen, dass man sich alles nur noch von irgendwelchen Dumpfnasen... -
news reacted to beisser's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
die lüfter bzw kühler von NUC's sind grundsätzlich unterdimensioniert. wenn du die kleinen kisten stresst, werden sie immer laut. daher baue ich meine NUC's (habe einen 8er und einen 13 pro) grundsätzlich in die massiven lüfterlosen gehäuse von...
-
news reacted to ThoSo's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
Prüfen : Im BIOS/UEFI wird die SSD sauber angezeigt? kleines Kochrezept für die Installation Ventoy von ventoy.net herunterladen, auspacken und auf dem USB Stick installieren. Das Proxmox VE ISO in das Hauptverzeichnis des Sticks kopieren, evtl...
