Latest activity
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.pvesm remove SATAPool out of curiosity- why do you keep bringing up the other node? are they clustered? if clustered, dont delete the store; you need to go to datacenter-storage and make sure you EXCLUDE the node that doesnt have that pool in it...
-
Falk R. replied to the thread Wie kann ich im Cluster Ausfallsicherheit herstellen?.Bitte nicht solche Aussagen treffen, wenn du dich nicht damit auskennst. Nachher glauben die Leute wirklich, das es nicht geht. -
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.How? Node2: root@node2:~# df -h Filesystem Size Used Avail Use% Mounted on udev 16G 0 16G 0% /dev tmpfs 3.2G 1.8M 3.2G 1% /run rpool/ROOT/pve-1 3.6T 2.7G 3.6T 1% / tmpfs 16G 66M...
-
Falk R. replied to the thread Proxmox HPE Alletra Support.Stimme dir voll zu. Du musst ja gar nicht so viel Manuell machen und einmal auf einem Host ein LVM anlegen ist keine extreme Arbeit. Vermutlich ist das Storage per FC angebunden, da würde ich eh empfehlen auf NVMeoverFC zu gehen. Bei NVMe ist...
-
gurubert reacted to dakralex's post in the thread Display VMs as shutdown on cluster node failure instead of HA-restart with
Like.
Hi! I'm not sure whether this will fit into the concept of HA itself, but if the guest is already on shared storage only, then it easily possible to recover that VM to a running node by just moving the guest's configuration file to the running... -
Falk R. replied to the thread Proxmox für 500-1000 VMs.Hi, selbst migriert habe ich bisher erst Cluster bis ca. 300VMs, aber ich kenne auch Unternehmen mit bis zu 2000VMs. Bei großen Unternehmen ist es aber oft schwieriger Infos zu bekommen, die veröffentlicht werden dürfen. Die Migration von großen...
-
Jjanus57 replied to the thread Windows Server Licensing 2025.Hi, Welcome to the beautiful world of Microsoft licensing. Note : other variants exist depending on what you're doing with your VMs Best regards,
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.delete the store.
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.The end result I am looking for is to not get errors for a non existnt pool, and to be able to move gueste from node one to node two.
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.lets only discuss the node in question, since the other one is working. I assume that the end result here is a zpool named saspool? if so, zpool create SASPool [raidtype] [device list] If something else, please note what your desired end result is.
-
Ddekiesel posted the thread [SOLVED] Does verify "read" the whole data every time? in Proxmox Backup: Installation and configuration.I am considering using cold storage storage s3 for my backups since storing data is much cheaper, but: When a verify runs, does it read the whole backup every time? Or just a certain percentage? Reading from cold storage is much more...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Yes and yes. The error is for SATAPool which is not and never has been on Node2 Node2 only had SASPool with the 12 SAS and rpool with two nVme PVE only has SATAPool with 10 Sata drives and rpoop with two nVme which are identical to the two on...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.I am completely confused. If the drives that host saspool are NOT PRESENT, then its a foregone conclusion that a defined store looking for the filesystem is going to error... what are you asking? lets start over. do you have the drives...
-
Aawirthy replied to the thread SSD ZFS Pool keeps increasing in usage space.How is this related to the space being used up on my ZFS pools?
-
bbgeek17 reacted to Johannes S's post in the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice? with Like.
Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the... -
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.All I did was build the pool, and then shut down. Amaon finally got me the parts I needed to gt the build done yesterday and 8 of my SAS drives were not showing when I went to add the pool so I unplugged one at a time until I found the 4 that...
-
Aalexskysilk replied to the thread ZFS - How do I stop resilvering a degraded drive and replace it with a cold spare?.dont worry about attaching/detaching it. simply remove and replace it. edit- DONT PULL IT YET. there's a resilver in progress; even though the disk is bad, the vdev partner is not in a "complete" state. let it finish resilver, and THEN replace...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.so I assume you have a data store defined looking for saspool... remember to delete that too.
-
GGMBauer replied to the thread Fehler No Hard Disk found! bei der Installation.Das möchte ich unterstreichen. Diese verlinkte Anleitung auf Youtube ist ja wirklicher Unsinn... Ja, ich verzweifle wirklich. Können junge Menschen geschriebenes nicht mehr verstehen, dass man sich alles nur noch von irgendwelchen Dumpfnasen...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Node2 : root@node2:~# zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT rpool 3.62T 2.59G 3.62T - - 0% 0% 1.00x ONLINE - root@node2:~# zpool import no pools available...