Latest activity
-
JJohannes S replied to the thread Question about Feature Replication.PBS has also a live-restore feature so you can start the VM without waiting for a completion of the restore.
-
JJust restore the VM of your choice on the other node. The storage type on the other node does not have to be the same as it was on the source. The result is basically a "replicated" VM from/to different filesystems ;-) The are CLI tools...
-
JJohannes S reacted to ThoSo's post in the thread Fehler No Hard Disk found! bei der Installation with
Like.
Prüfen : Im BIOS/UEFI wird die SSD sauber angezeigt? kleines Kochrezept für die Installation Ventoy von ventoy.net herunterladen, auspacken und auf dem USB Stick installieren. Das Proxmox VE ISO in das Hauptverzeichnis des Sticks kopieren, evtl... -
JJohannes S reacted to omavoss's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
@charly88888 : Lass Dich bitte nicht entmutigen, von wegen "Schrott"! Als kleiner stromsparender MiniPC ist der NUC sehr wohl als Server zu gebrauchen. Natürlich nicht für professionelle Anwender mit mehreren Hundert LXC, aber für ein HomeLab...
-
JJohannes S reacted to alexskysilk's post in the thread Evaluating ProxMox and failing on UEFI with Like.
the likely culprit is a pre-existing filesystem on your local drive. The installer is usually pretty good at dealing with it, but in your case clearly it isnt. use a linux livecd like https://gparted.org/download.php and completely wipe the...
-
Ttricorax replied to the thread [SOLVED] Nach Aktivierung SR-IOV (NIC) ist die PVE GUI nicht erreich- & pingbar.Das ist korrekt, da ich die SFP+-Ports der NiC nur nutzen kann, wenn der Tiny im Serverrack verbaut ist. Da ich derzeit nicht per SSH oder GUI draufkomme kann ich nur die integrierte i219 für das Netzwerk nutzen, da er für die direkte...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.what does zpool list and zpool import show?
-
Aalexskysilk replied to the thread Evaluating ProxMox and failing on UEFI.the likely culprit is a pre-existing filesystem on your local drive. The installer is usually pretty good at dealing with it, but in your case clearly it isnt. use a linux livecd like https://gparted.org/download.php and completely wipe the...
-
Aalexskysilk reacted to Johannes S's post in the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice? with Like.
Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Feb 19 13:56:21 node2 pvestatd[1638]: could not activate storage 'SataPool', zfs error: cannot import 'SATAPool': no such pool available Feb 19 13:56:31 node2 pvestatd[1638]: zfs error: cannot open 'SATAPool': no such pool I meant Node1...
-
Nnaps1saps replied to the thread [SOLVED] Trouble with iSCSI and cluster node inconsistency.Thank you again! Still going well so all issues I stated may be resolved.
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.actual errors would be useful- this can refer to the zfs pool or the storage pool in pve. No. each pool must have a different name on the same host. same goes for pve stores.
-
JJohannes S reacted to fba's post in the thread [SOLVED] Another io-error with yellow triangle with Like.
Of course, no one can test every variation. But there is a middle ground between exhaustive testing and echoing AI outputs without the necessary critical oversight. This is my last OT post here as this discussion is not helping the OP.
-
JJohannes S reacted to fba's post in the thread [SOLVED] Another io-error with yellow triangle with Like.
ARC is for a default installation on a PVE 9 with 32 GiB much lower. So the example is missing clear directions and could be phrased much better to be helpful.
-
JJohannes S reacted to fstrankowski's post in the thread [SOLVED] Another io-error with yellow triangle with Like.
Jesus AI Slop nonsense!
-
JJohannes S reacted to fba's post in the thread [SOLVED] Another io-error with yellow triangle with Like.
Would you be so kind to not post untested ai generated answers? Parts like this are simply not correct. This would potentially increase the used memory for ARC.
-
JJohannes S reacted to fba's post in the thread [SOLVED] Another io-error with yellow triangle with Like.
Hi, anything unusal in the logs dmesg -T or journalctl -xe before or at the time of the crash? You could connect to the qemu monitor with qm monitor <vmid> (or via GUI) and run commands like info status and info block to retrieve more details...
-
JJohannes S reacted to whiterabbit's post in the thread [SOLVED] LXC-Container und ping: Seltsames Problem mit der Erreichbarkeit with Like.
Super. Das probiere ich aus und melde mich dann. Besten Dank. Die Warnung in der OPNSense bei den "globalen Optionen" habe ich gesehen: "Warnung: Diese Option wird auch gespeichert, wenn der DHCP-Server deaktiviert ist. Nur die Maschinen, die...
-
JJohannes S reacted to whiterabbit's post in the thread [SOLVED] LXC-Container und ping: Seltsames Problem mit der Erreichbarkeit with Like.
Das scheint es gewesen zu sein. :) Ich kann den RustDesk-Server jetzt sofort erreichen -- ohne vorher etwas in der Konsole machen zu müssen, um Traffic zu erzeugen. Top!
-
Jno, I suggest you one way. ZFS is the way for multi boot disks, but it's slower because the overhead for checksum and integrity, even more with none datacenter drives. ZFS is enterprise oriented.