Latest activity
-
Aalexskysilk replied to the thread /etc/init.d/ceph warnings.Ignore it. its just informing you what the default behavior for a ceph install is, which is not aware of how ceph interacts in a pve environment.
-
G_gabriel replied to the thread Best use of 4x NVMe drives.no, I suggest you one way. ZFS is the way for multi boot disks, but it's slower because the overhead for checksum and integrity, even more with none datacenter drives. ZFS is enterprise oriented.
-
JJohannes S reacted to alexskysilk's post in the thread Custom Auto install proxmox with zfs and offline packages with
Like.
I feel so inadequate.... for years, I just run a postinstall script that sits on a nfs mount. yes, I could have done more automation but in the end it seemed the better part of valor to just type mount followed by /path/to/mount/postinstall.sh... -
Aalexskysilk replied to the thread Custom Auto install proxmox with zfs and offline packages.I feel so inadequate.... for years, I just run a postinstall script that sits on a nfs mount. yes, I could have done more automation but in the end it seemed the better part of valor to just type mount followed by /path/to/mount/postinstall.sh...
-
JJ-dub posted the thread ZFS - How do I stop resilvering a degraded drive and replace it with a cold spare? in Proxmox VE: Installation and configuration.Replacement HDD gets here tomorrow. In the mean time I'd like to save the mirrored good drive from working overtime to resilver the failing drive. I also don't understand how to swap the new drive with the old drive, since I don't have any open...
-
G_gabriel replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..has nothing to do with network between guests. triple check within your guests. No third party app within guest ? Have you multiple Windows accounts ? Windows 11 lock out account after multiple failure. edit: do you use hostname to connect ? if...
-
BBikersmurf replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..Reviewing previous posts to see if there was anything I overlooked. None of the VMs have had Static IP addresses assigned to them before or after the Subnet change they are all dynamic IPs. The issues are all inside of one host/node. Physical...
-
BBikersmurf replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..Can I generate new certificates? Thanks again. @mram @sw-omit @0xcircuitbreaker @Brethsteallar @_gabriel
-
LI am on the latest proxmox 9.1.5 with ceph 19.2.3 squid. These warnings bothering me a lot and I am scared to touch anything related to ceph. systemd‑sysv‑generator: SysV service '/etc/init.d/ceph' lacks a native systemd unit file… Please...
-
Ppjalm replied to the thread Best use of 4x NVMe drives.If I understand correctly you are saying I can not install PVE on a multidisk setup for boot?
-
Kkarlm posted the thread SAS pool on one node, SATA pool on the other in Proxmox VE: Installation and configuration.I just built a new server with 12 8TB SAS drives. My original has 10 4TB SATA drives. I noticed on the new server I was getting lots o log errors about SATApool not being on the node. Can I name the pools the same without issue since they are...
-
BBikersmurf replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..There is only one PVE host which is why I only provided one host. I'm not having connection issues involving more than one host. The issues I'm having are all within that one host. None of the VMs had static IPs and when I set up the server on a...
-
-
Bbeisser replied to the thread Fehler No Hard Disk found! bei der Installation.die lüfter bzw kühler von NUC's sind grundsätzlich unterdimensioniert. wenn du die kleinen kisten stresst, werden sie immer laut. daher baue ich meine NUC's (habe einen 8er und einen 13 pro) grundsätzlich in die massiven lüfterlosen gehäuse von...
-
Bbeisser reacted to ThoSo's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
Prüfen : Im BIOS/UEFI wird die SSD sauber angezeigt? kleines Kochrezept für die Installation Ventoy von ventoy.net herunterladen, auspacken und auf dem USB Stick installieren. Das Proxmox VE ISO in das Hauptverzeichnis des Sticks kopieren, evtl...
-
Bbeisser replied to the thread Fehler No Hard Disk found! bei der Installation.ja, lass dich erstmal nicht entmutigen. viele leute hier haben schlechte erfahrungen mit mini-pcs gemacht, in der hinsicht hat @news schon recht. gibt aber auch viele die mini-pcs ziemlich erfolgreich seit langer zeit betreiben. mein homelab...
-
JJohannes S replied to the thread Proxmox für 500-1000 VMs.https://www.proxmox.com/en/about/about-us/stories hat einiges an Success Stories über Firmen, die ihre Infrastruktur migriert haben. Envtl. kann auch deren Vertrieb sales@office.com mit Referenzen dienen. Auf die Schnelle habe ich folgende...
-
AAstralix replied to the thread [SOLVED] Planung Network Heimnetzwerk mit VLANs.Hat dazu mal jemand ein Video gemacht, das das etwas erläutert? Ich habe aktuell nur 5 VLANs und nur 3 davon muss der Proxmox kennen und ich habe aktuell nur einen einzigen Server. Aber grundsätzlich ist das keine Entschuldigung es nicht von...
-
UdoB reacted to Johannes S's post in the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice? with Like.
Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the... -
JJohannes S replied to the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice?.Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the...
-
Eecplatz replied to the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice?.We abandoned FC while ago; standard ethernet delivered better results. See here.
