Latest activity

  • U
    uzumo replied to the thread Intel B50pro passthrough..
    The prompt displays Rebar's functionality as shown in the image result, along with the current value. Excerpt from my PVE's lspci -vvvs Capabilities: [420 v1] Physical Resizable BAR BAR 2: current size: 16GB ★, supported: 256MB...
  • P
    Ich würde wetten OP hat irgendeinen aus dieser Liste ;-) ...zumindest war hier irgendwo von MegaRAID die Rede. Anyways ohne zu wissen was für eine Karte er hat, können wir eh nichts definitives sagen. Mein Punkt ist: Wenn der Kontroller im RAID...
  • dakralex
    Hi! One more thing, is it possible that the ignored HA resource's underlying guest has "Start at boot" set? Otherwise I could not reproduce the issue at hand and more information about a minimal and working reproducer would be needed to...
  • A
    Hi, We are running into the exact same issues, and are asking the exact same questions, with the only difference in setup being that we use NetApp for NFS. I've came to the same conclusion as you. Space reclamation works, but only sometimes, not...
  • C
    ComfySofa replied to the thread Intel B50pro passthrough..
    Hmm - that just comes back with a prompt..?
  • I
    IsThisThingOn replied to the thread PVE to PBS.
    It depends. Windows uses the User / share permission and uses a more restrictive AND permission logic. But for Users and groups, it uses the less restrictive OR permission logic. And Synology does this stuff again differently by using the more...
  • U
    uzumo replied to the thread Intel B50pro passthrough..
    If you're checking in PVE, you should be able to see it with `lspci -vvvs 0000:03`.
    • 画像.jpeg
  • C
    ComfySofa replied to the thread Intel B50pro passthrough..
    Right well in that case no....no matter what the setting when windows is running native on the hardware no matter what the setting the intel graphics app says it disabled....as per that screenshot back at the start of the thread....that being...
  • U
    uzumo replied to the thread Intel B50pro passthrough..
    Please try booting Windows on the host machine instead of a Windows VM. If it shows as enabled in Windows, I don't think there's a difference in PVE, so I believe it should be enabled in PVE as well.
  • D
    After running postqueue -f I see the following messages in the logs: Feb 13 12:59:33 proxmoxmail2 pmg-smtp-filter[3789923]: 2026/02/13-12:59:33 CONNECT TCP Peer: "[127.0.0.1]:38850" Local: "[127.0.0.1]:10024" Feb 13 12:59:33 proxmoxmail2...
  • T
    Hallo nochmal, wäre es irgendwie möglich, im Tracking Center unter From die Header-From-Adresse aus der Mail anstelle des envelope-from anzuzeigen? Das würde das Tracking stark vereinfachen, denn wer weiß schon, was sich hinter...
  • A
    I don't know how, but now live migration works too. Thanks for the support and the directions.
  • C
    ComfySofa replied to the thread Intel B50pro passthrough..
    Ok - well im still stuck on the Code43 at the moment - so in the windows vm the intel suite cant see the card...
  • U
    uzumo replied to the thread Intel B50pro passthrough..
    I think it's probably enabled, but to be sure, launch it on Windows instead of PVE and check with GPU-Z. GPU-Z can show whether Rebar is enabled.
    • IMG_0904.jpeg
  • Falk R.
    Hast du dir mal die Liste der Controller angeschaut? Alles uralte Modelle, die ich produktiv niemals noch einsetzen würde. Als HBA auch nur im Notfall. Die neuesten in der Liste haben gerade mal PCIe3 und das meiste ist PCIe2 und 1
  • D
    The journal is working, and I can see information about incoming emails, but journalctl -u pmg-smtp-filter | grep B6FD443A5C doesn't output anything.
  • P
    Naja zumindes Broadcom sagt selbst: Note: SAS HBAs support IT (Integrated Target) and IR (Integrated RAID) firmware. IT in the table below indicates that the IT firmware must be loaded to the SAS HBA for that functionality. IR indicates that...
  • C
    ComfySofa replied to the thread Intel B50pro passthrough..
    Ah - sorry just so i understand (ReBar is enabled on mine?) - i only ask as whether the setting is off or on in native windows the intel windows driver says its not enabled.... (win for Proxmox if it is)!!
  • G
    You can also set it up as ZFS if you plan on using replication at some point, but if you plan on staying on a single node.. Thin LVM is the way to go!
  • T
    Hallo, kennt jmd. von Euch einen Weg, eine Domainliste (z.B. zur Sperrung) mit Wildcards für alle Subdomains zu erstellen? - wenn ich eine RegEx erzeuge, wird sie nicht auf den Domainnamen des Absenders angewandt - wenn ich eine Domainliste...