Latest activity
-
Jjames74 posted the thread [SOLVED] MINISFORUM MS-A2 (AMD Ryzen 9 9955HX) - solution, use a ZFS option and not EXT4 when setting up storage in Proxmox VE: Installation and configuration.I have tried installing Proxmox a few times on this system and it keeps hanging on "create LVs". I've even let it sit for 45 min as seen in other posts (they said 20-30min), the installer restarted itself at this point. I am able to install other...
-
Mm.j replied to the thread Unexpected reboot of Proxmox host.Since there is not really anything in the logs, and it only happened once, it is really hard to say. Maybe it could be a firmware thing? For example, it seems your BIOS is from 2022. You could try installing an older kernel (than 6.17.4-2) and...
-
Mmouse51180 posted the thread [SOLVED] NodeMesh Fabirc Question in Proxmox VE: Installation and configuration.Question: I thought when the nodes were configured in a Node Mesh setup, that they would be able to traverse to other nodes from any interface in the mesh setup. So if one path was broken, it could contact the other nodes by traversing through a...
-
-
JJoeJJohnsonII reacted to shanreich's post in the thread [SOLVED] Intel X710 No Link Detected with
Like.
Users with those particular cards have encountered issues with the integrated LLDP engine - so it could be worth a try to disable it completely and see if the card works afterwards. For more detailed instructions see [1]. [1]... -
JJoeJJohnsonII replied to the thread [SOLVED] Intel X710 No Link Detected.Thank you so much for the help shanreich! After disabling the LLDP engine the link came up and I was able to get it working. Quick side note in case anyone comes across this, the command in the article is slightly wrong. The flag...
-
Yyuuki08noah reacted to shanreich's post in the thread Proxmox SDN EVPN: cross-node VM cannot ping, underlay works, L3 EVPN disabled with Like.
Do you have the firewall active? How does your configuration look like? cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn ip a ip r cat /etc/pve/sdn/zones.cfg cat /etc/pve/sdn/vnets.cfg cat /etc/pve/sdn/controllers.cfg cat...
-
Yyuuki08noah replied to the thread Proxmox SDN EVPN: cross-node VM cannot ping, underlay works, L3 EVPN disabled.The firewall is inactive ubuntu@k8s-dev-101:~$ sudo ufw status Status: inactive root@node94:~# cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn ip a ip r cat /etc/pve/sdn/zones.cfg cat /etc/pve/sdn/vnets.cfg cat...
-
Rrcrosier posted the thread Log files left behind on backup device... in Proxmox Backup: Installation and configuration.Hello, New to Proxmox. We're running tests with it on a couple old, decommisioned servers, to learn it, with hopes of replacing VMWare with it one day. I've successfully set up a Synology diskstation for testing backups, and it's working fine...
-
-
BbeastyAlk replied to the thread SDN aliases not found by firewall.Glad to help!
-
Eetienne_p posted the thread Migrating hard disk from a NFS volume to another NF Volume in Proxmox VE: Installation and configuration.Hello I am managing a cluster with 2 nodes and a qDevice VM to respect the quorum. Proxmox Server on 9.1.5 version The IP adresse of Proxmox node are these : - First node : 192.168.1.1 (MGMT network) 192.168.2.1 (SAN Network) - Second node ...
-
LLG-ITI replied to the thread EFI Disk Timeout during Boot.Sorry for not replying sooner. I was on holiday for a few days at the start of the week. pveversion --verbose: dpkg -s systemd | grep -i version: Downgrading to the 6.14 Kernel and rebooting sadly still ended in a timeout during EFI Boot.
-
-
Ssnth replied to the thread WebAuthn "no webauthn configuration available" — Fresh 8.4.1 install, previously worked.Thank you for this @chance . Also spent part of an hour trying to get this to work before I happened upon your post. I did consult the documentation but it took me straight to...
-
UdoB reacted to Onslow's post in the thread Can't connect to GUI after creating sub-interface with Like.
Hi, @Dwarf Make sure that your PC (or whatever device you are trying to reach PVE from) is in the same VLAN as the PVE. -
Ssnth reacted to chance's post in the thread WebAuthn "no webauthn configuration available" — Fresh 8.4.1 install, previously worked with Like.
I've been working on this for hours. The moment I post on the forums, I get an upsight - READ THE DOCUMENTATION https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pveum_configure_webauthn 14.6.6. WebAuthn For WebAuthn to work, you need to...
-
I figured it out. The IP address of the PVE server was not defined in NFS permissions on the Synology.
-
Wwth reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
-
Jjeffgott replied to the thread Failed Backup.I figured it out. The IP address of the PVE server was not defined in NFS permissions on the Synology.
-
SStril posted the thread Proxmox VLAN Design: VLAN-aware bridge vs. bridge-per-VLAN – what do you use and why? in Proxmox VE: Networking and Firewall.Hi everyone, I’m currently reworking the network setup on one of our Proxmox VE clusters and I’d like to hear what VLAN approach others are using in practice. There seem to be two common design patterns: 1) Single VLAN-aware bridge...
-
Bbrent729 replied to the thread [SOLVED] Can't access Web UI after bulk shutdown my whole VM.I also just realized, after I did bulk start on my VM, i can access my proxmox server through my PC, using firefox browser as usual. I can also ping both my proxmox server and gateway from my PC, without changing anything from my PC. This is a...
-
Mmajor caveira replied to the thread I cant upgrade proxmox.Correct. The memory is fine. No problem detected. Because after the "dpkg --audit", I updated all the packages one by one and the grub-efi-amd64 was the last one. As soon as start updating this package the computer restart without warning.
