Latest activity
-
Yyuuki08noah replied to the thread Proxmox SDN EVPN: cross-node VM cannot ping, underlay works, L3 EVPN disabled.The firewall is inactive ubuntu@k8s-dev-101:~$ sudo ufw status Status: inactive root@node94:~# cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn ip a ip r cat /etc/pve/sdn/zones.cfg cat /etc/pve/sdn/vnets.cfg cat...
-
Rrcrosier posted the thread Log files left behind on backup device... in Proxmox Backup: Installation and configuration.Hello, New to Proxmox. We're running tests with it on a couple old, decommisioned servers, to learn it, with hopes of replacing VMWare with it one day. I've successfully set up a Synology diskstation for testing backups, and it's working fine...
-
-
BbeastyAlk replied to the thread SDN aliases not found by firewall.Glad to help!
-
Eetienne_p posted the thread Migrating hard disk from a NFS volume to another NF Volume in Proxmox VE: Installation and configuration.Hello I am managing a cluster with 2 nodes and a qDevice VM to respect the quorum. Proxmox Server on 9.1.5 version The IP adresse of Proxmox node are these : - First node : 192.168.1.1 (MGMT network) 192.168.2.1 (SAN Network) - Second node ...
-
LLG-ITI replied to the thread EFI Disk Timeout during Boot.Sorry for not replying sooner. I was on holiday for a few days at the start of the week. pveversion --verbose: dpkg -s systemd | grep -i version: Downgrading to the 6.14 Kernel and rebooting sadly still ended in a timeout during EFI Boot.
-
-
Ssnth replied to the thread WebAuthn "no webauthn configuration available" — Fresh 8.4.1 install, previously worked.Thank you for this @chance . Also spent part of an hour trying to get this to work before I happened upon your post. I did consult the documentation but it took me straight to...
-
UdoB reacted to Onslow's post in the thread Can't connect to GUI after creating sub-interface with
Like.
Hi, @Dwarf Make sure that your PC (or whatever device you are trying to reach PVE from) is in the same VLAN as the PVE. -
Ssnth reacted to chance's post in the thread WebAuthn "no webauthn configuration available" — Fresh 8.4.1 install, previously worked with Like.
I've been working on this for hours. The moment I post on the forums, I get an upsight - READ THE DOCUMENTATION https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pveum_configure_webauthn 14.6.6. WebAuthn For WebAuthn to work, you need to...
-
I figured it out. The IP address of the PVE server was not defined in NFS permissions on the Synology.
-
Wwth reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
-
Jjeffgott replied to the thread Failed Backup.I figured it out. The IP address of the PVE server was not defined in NFS permissions on the Synology.
-
SStril posted the thread Proxmox VLAN Design: VLAN-aware bridge vs. bridge-per-VLAN – what do you use and why? in Proxmox VE: Networking and Firewall.Hi everyone, I’m currently reworking the network setup on one of our Proxmox VE clusters and I’d like to hear what VLAN approach others are using in practice. There seem to be two common design patterns: 1) Single VLAN-aware bridge...
-
Bbrent729 replied to the thread [SOLVED] Can't access Web UI after bulk shutdown my whole VM.I also just realized, after I did bulk start on my VM, i can access my proxmox server through my PC, using firefox browser as usual. I can also ping both my proxmox server and gateway from my PC, without changing anything from my PC. This is a...
-
Mmajor caveira replied to the thread I cant upgrade proxmox.Correct. The memory is fine. No problem detected. Because after the "dpkg --audit", I updated all the packages one by one and the grub-efi-amd64 was the last one. As soon as start updating this package the computer restart without warning.
-
JJohannes S reacted to DaGerba's post in the thread [SOLVED] Could replacing ZFS with Hardware Raid fix IO delay issue? with Like.
Thank you @UdoB for the reply. That is what I estimated. As I am booting from the rpool I will go the more secure "long-night-way" with a fresh installation on the new ZFS RAID10 and then restoring the VMs from my backups. Good advice. As I am...
-
JJohannes S reacted to spirit's post in the thread apt or pve for automatic (unatended) upgrades? with Like.
proxmox used apt update / apt dist-upgrade behind pveupdate/pveupgrade, so no problem. Just be carefull to use "apt dist-upgrade" and not "apt upgrade" !
-
Bbrent729 replied to the thread [SOLVED] Can't access Web UI after bulk shutdown my whole VM.Well, what do you know! It works on safari. Thanks for the idea. Now the only thing I need to fix is the firewall blocking my connection between the proxmox server and my windows PC. Thanks! It's just weird that all this browser and firewall...
-
-
Bbellaireroad posted the thread W11 Pro license and VM migration in Proxmox VE: Installation and configuration.Do you need to purchase a new license when migrating to another node?
-
GGilou replied to the thread MAC prefix for each vnet.Aw, I thought you meant the MAC for the VM/CT on the vnet, not the bridge itself, sorry.. and it could be interesting for any type of bridge then no?
-
AJust for clarity, while the result may look the same, PVE HA is the opposite: not "shoot-the-other-node and live" but "commit suicide" - a node fences itself, by a hard reset.
