Latest activity
-
YYYZ88 reacted to uzumo's post in the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread with
Like.
On Windows, if you don't disable the device on the guest OS before shutting down, the iGPU won't terminate properly and will require a host reboot. *@afonya seems to be using Linux. If his VM can handle shutdowns and restarts, it's best to set... -
bbgeek17 replied to the thread [SOLVED] Clarification request – SAN FC shared storage, Proxmox snapshots and Veeam backup compatibility.I just realized that the post you referenced is a summary of our KB article :) Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
bbgeek17 replied to the thread [SOLVED] Clarification request – SAN FC shared storage, Proxmox snapshots and Veeam backup compatibility.Thank you for the link @katti. It so happens that we, at Blockbridge, are somewhat familiar with how Veeam operates: https://forums.veeam.com/proxmox-ve-f79/fyi-potential-data-corruption-issue-with-proxmox-t95796.html The forum post you...
-
Sserendipitist replied to the thread No ZFS Degraded Notifications.Is this still the best option on Proxmox 9.1.x in 2026, or is there a built-in facility for this now?
-
AAyrton5 posted the thread Easiest way to rebuild after power cut in Proxmox VE: Installation and configuration.I have a Proxmox server that runs on an SSD, which contains two instances of OMV. It also has 4 spinning disks which are pooled as a ZFS stripe and mirror. I have another box running PBS, which takes a backup of one of the OMVs - this is the most...
-
Ccomplexplaster27 reacted to jdancer's post in the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad with Like.
While it's true that 3-nodes is the bare minimum for Ceph, losing a node and depending on the other 2 to pick up the slack workload will make me nervous. For best practices, start with 5-nodes. With Ceph, more nodes/OSDs = more IOPS. As been...
-
PPhocks7 replied to the thread VM status: internal-error.When installing mintOS bare metal and remoting in with rustdesk the system is completely stable (as with the proxmox VE). It's specifically a VM container/KVM issue.
-
Uuzumo replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.On Windows, if you don't disable the device on the guest OS before shutting down, the iGPU won't terminate properly and will require a host reboot. *@afonya seems to be using Linux. If his VM can handle shutdowns and restarts, it's best to set...
-
JJohannes S reacted to alexskysilk's post in the thread Call for Evidence: Share your Proxmox experience on European Open Digital Ecosystems initiative (deadline: 3 February 2026) with Like.
This is the expected reaction for anyone who hasnt been on the other side of this. REMEMBER, the PRIORITY of any change in systems is, in order: - to provide AT LEAST a minimum of service requirements, as delineated in the RFP. - to cause as...
-
Sstevo replied to the thread Nvidia Driver upgade issue with lxc.So I have now solved the problem myself the issue was when I created the lxc I had let the script for the creation of fileflows install it own drivers, hence why it was by passing the uptodate drivers on the host.
-
Kkatti replied to the thread [SOLVED] Clarification request – SAN FC shared storage, Proxmox snapshots and Veeam backup compatibility.hello @bbgeek17...
-
IAlso ich habe jetzt heute noch ein wenig getestet. Egal wie meine config von vmbr1 aussieht. Sobald VLAN-aware angeht blockt proxmox den VLAN Traffic sodas er nciht bei der opnsense landet. Mein weg war jetzt wie folgt. Auf Proxmox wurde die...
-
JJohannes S reacted to Falk R.'s post in the thread Schlechte NUMA-Konfigurierbarkeit für KVM-Gäste. with Like.
Genau für diese Nischenanwendungen sind diese Server sinnvoll. Aber der Mittelständler mit wenigen Admins, nimmt lieber das simple Setup. vSphere macht einiges richtig, dafür bekomme ich bei DB Servern mit Proxmox deutlich mehr I/O hin. Für den...
-
JVeeam hat da noch ein paar kleine Bugs. Daher migriere ich im Moment gar nicht mehr mit Veeam. Tatsächlich lief der Restore mit 12.3 etwas stabiler. Leider ist Veeam nicht so gesprächig, wo das Problem ist. Das was die Worker VM macht ist auch...
-
IITMader replied to the thread Proxmox Backup/Migration mit Veeam.So wie ich es gemacht habe, hat es mit Veeam funktioniert. Das habe ich unter anderem gemacht, weil die kurzen Anleitungen, welche ich auf Anhieb gefunden hatte, nicht funktionierten. Dann kam ich auf die Idee, dass sowieso das Zusammenspiel von...
-
YYYZ88 replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.I sent a message to Minisforum, let's see if they share it with me too. I'm using the VBIOS uploaded to the Github repo. Everything is working fine on a fresh boot and when shutting down or rebooting the VM. But I'm having issues when stopping...
-
CClint84 replied to the thread Best (most performant) way of sharing NAS storage to Windows 11 VM.True, I haven't been able to confirm it is in fact storage, that just seem to be the most likely factor that made sense since the navigating VMs operating system was smooth and responsive and only when retrieving data stored on the remote drive...
-
-
Kkintaroju replied to the thread Mountpoints for LXC containers broken after update.I also just got hit and had to revert, hopefully they will fix it in the near future
-
Sstevo posted the thread Nvidia Driver upgade issue with lxc in Proxmox VE: Installation and configuration.Please help!! So I am currently running proxmox in a cluster, but the node in question has 1x Quadro P2000, 1x Quadro RTX 4000 and AMD WX4100. As I couldnt see the RTX 4000 in my plex lxc I starting looking into upgrading the nvidia driver on...
-
-
KKingneutron reacted to Dominic's post in the thread PBS client authentication with API token doesn't work with Like.
For example: On Proxmox Backup Server root@pbs:~# proxmox-backup-manager user create forumuser@pbs root@pbs:~# proxmox-backup-manager user generate-token forumuser@pbs forumtoken Result: { "tokenid": "forumuser@pbs!forumtoken", "value"...
