Latest activity
-
LLeonid Kanareykin reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments... -
Nness1602 replied to the thread PVE 9.1.5 break NFS Mount Points to LXC (jellyfin)?.https://forum.proxmox.com/threads/proxmox-9-1-5-breaks-lxc-mount-points.180161/
-
LI installed PDM 1.0.1 today and ran updates to 1.0.2. The first thing that I notice is that the visualizations are not usable. "Guests With the Highest CPU Usage": Literally all of the bars on this widget are the same size (quite small), but if...
-
LLeonid Kanareykin replied to the thread SDN and admin changes logging.up
-
Yyikezhucao replied to the thread Generic Solution when install gets FrameBuffer Mode Fails.Really helpful! Thanks a lot! ;)
-
Yyikezhucao reacted to MrPete's post in the thread Generic Solution when install gets FrameBuffer Mode Fails with Like.
I was installing VE 7.2 on my brand new host box... first ran into black screen after install begins -- see separate thread on that. Then, install failed, with the X server conking out before anything graphical happened. Here's the generic...
-
IMove that to a fast network too! Otherwise your guests will be limited by that 1 Gbit. see https://docs.ceph.com/en/latest/rados/configuration/network-config-ref/ for which ceph network is used for what. Checkout our 2023 Ceph benchmark...
-
Uuzumo replied to the thread [SOLVED] Upgraded from 7.4 to 8.4 - zpool upgrade safe, what do I need to check?.Updating a ZFS pool is irreversible, so you should not perform it until you have confirmed all machines are functioning properly for a sufficient period. A newer kernel may affect your virtual machine or hardware. In that case, you may need to...
-
CoolTux replied to the thread Paperless NGX Update.Die Macher der Helperscrips haben das bestimmt berücksichtigt*hust* Schau mal da nach was die zum Thema Update stehen haben. Frage mich allerdings was das Thema im Forum PBS zu suchen hat. -
Uuzumo reacted to news's post in the thread [SOLVED] Upgraded from 7.4 to 8.4 - zpool upgrade safe, what do I need to check? with Like.
I Run Proxmox VE and BS with ZFS for some years and had no Problem with internal ZFS Upgrades. But not all my desktop System run the same zfs version for access the newer zfs disks. Your way is to go to Proxmox VE 9.x, then this is only one step.
-
Ssatfan posted the thread Intel I226-V NICs enp5s0 / enp7s0 showing PHC removed and disappearing after PVE 8.4 → 9.1 upgrade in Proxmox VE: Installation and configuration.Hello, I have a 6-port Intel I226-V machine. After upgrading from PVE 8.4 to 9.1, two network interfaces enp5s0 and enp7s0 are detected during boot but disappear later from the system. The kernel boot log shows all 6 NICs are correctly named...
-
Ssatfan replied to the thread I have a 6-port Intel I226-V machine. After upgrading from Proxmox VE 8.4 to 9.1, two network ports disappeared from the system (enp5s0 and enp7s0)..I have a 6-port Intel I226-V machine. After upgrading from PVE 8.4 to 9.1, two network interfaces enp5s0 and enp7s0 are detected during boot but disappear later from the system. The kernel boot log shows all 6 NICs are correctly named by the igc...
-
Ssatfan replied to the thread I have a 6-port Intel I226-V machine. After upgrading from Proxmox VE 8.4 to 9.1, two network ports disappeared from the system (enp5s0 and enp7s0)..root@pve:~# dmesg | grep -i eth [ 1.296473] Intel(R) 2.5G Ethernet Linux Driver [ 1.377443] igc 0000:01:00.0 eth0: MAC: a8:b8:e0:00:52:33 [ 1.435696] igc 0000:02:00.0 eth1: MAC: a8:b8:e0:00:52:34 [ 1.495656] igc 0000:03:00.0 eth2...
-
Ssatfan posted the thread I have a 6-port Intel I226-V machine. After upgrading from Proxmox VE 8.4 to 9.1, two network ports disappeared from the system (enp5s0 and enp7s0). in Proxmox VE: Installation and configuration.Hello, I have a 6-port Intel I226-V machine. After upgrading from Proxmox VE 8.4 to 9.1, two network ports disappeared from the system (enp5s0 and enp7s0). From the kernel boot log, all 6 NICs are detected and named correctly by the igc...
-
Kkacper.adrianowicz replied to the thread Slow ceph operation.Hello everyone! I moved pulic network to the same 10Gbit network as cluster network. I found great post on forum with step-by-step guide on how to safely do it: https://forum.proxmox.com/threads/ceph-changing-public-network.119116/ And results...
-
-
BBinayak01 posted the thread Struggling to expose Proxmox VMs publicly via WireGuard + VPS routed IPs (routing loop & connectivity issues) in Proxmox VE: Networking and Firewall.Hello Proxmox community, I’m facing a complex networking issue and would appreciate guidance from anyone experienced with routed public IPs + VPN + Proxmox. Current Setup I have: Local server: Dell PowerEdge running Proxmox (behind NAT /...
-
Ddigitaldad posted the thread PVE 9.1.5 break NFS Mount Points to LXC (jellyfin)? in Proxmox VE: Installation and configuration.Just upgraded one of my PVE hosts today (Datacenter/proxmox/updates). After rebooting the host, one of my LXC will not boot. After troubleshooting logs, the only thing I'm finding successful, is to remove the Mount Point to my Synology NAS in the...
-
Bblaise23 replied to the thread [SOLVED] cannot stop/reboot VM.This VM is stuck because its qemu process is hung in an uninterruptible I/O state, which is why shutdown, hard stop, and even node reboot don’t work. Try killing the qemu PID manually; if that fails, a physical power-off of the host is the only...
-
DDzung replied to the thread Temporarily disable reboot if HA is lost.anyone help me with this config
-
Vvoid307 posted the thread Help Required - Proxmox PVE/PBS Log Shipping (SIEM Integration) in Proxmox VE: Installation and configuration.We are reviewing Proxmox VE (PVE) and PBS from an audit and security monitoring perspective, specifically around logging and alerting for administrative changes (users, roles, ACLs, permissions). Our requirement is to detect and alert when a...
