Latest activity
-
Ccomplexplaster27 replied to the thread Unable to add back a Datastore.Backup server 3.4.0 this might be the issue, that button didn't exist on this version and I think it only appeared in V4 of PBS.
-
Di have a windows 11 vm and pbs vm and they will randomly not start with this error: but if i retry a couple of times, they will inevitably start up. anyone have any ideas why this is happening?
-
aL1aL7 replied to the thread Proxmox Backup/Migration mit Veeam.Welche Version der virtio Treiber hast Du in der Veeam-Maschine installiert? -
DDzung posted the thread Temporarily disable reboot if HA is lost in Proxmox VE: Installation and configuration.Since I'm planning to change the ring's IP address, I'm wondering if there's a way to temporarily disable automatic node reboots when the quarom is lost during that process. It might also be possible if I want to test network processing and...
-
GGuiltyNL replied to the thread [SOLVED] Upgraded from 7.4 to 8.4 - zpool upgrade safe, what do I need to check?.Could someone from official Proxmox support confirm my case?
-
Jjdancer replied to the thread Proxmox Install Failing on R740xd - PERC H730P.Ditch the PERC HBA-mode drama and swap it for a Dell HBA330 true IT/HBA-mode storage controller. Your future self will thank you. Plus, HBA330s are very cheap to get. Update to latest firmware from dell.com/support
-
Ccsl replied to the thread PE8.4.16 Error Removing Snapshot.Hi @Impact image: /mnt/pve/Storage/images/105/vm-105-disk-0.qcow2 file format: qcow2 virtual size: 500 GiB (536870912000 bytes) disk size: 466 GiB cluster_size: 65536 Format specific information: compat: 1.1 compression type: zlib...
-
Ccsl replied to the thread PE8.4.16 Error Removing Snapshot.Hi @Impact Here's my storage.cfg: Hi @bbgeek17 - VM configuration: qm config [id] - raw VM configuration: cat /etc/pve/qemu-server/vmid.conf - storage status: - if you have block storage: lvm; lsblk Don't think I have that? -...
-
Mmacamba replied to the thread e1000 driver hang.At first I thought random. But after testing both Nic’s crash under load.
-
JJohnny R replied to the thread Proxmox Keeps Freezing every 2-3 days.Safari is supported according the environment requirements and I confirm this: starting, stopping and regular stuff works on Safari. The use case that did not work was: creating a VM using an uploaded ISO. In fact it was the Proxmox Backup Server...
-
Zzhouu posted the thread pve-container 6.1.0 startup for scratch container failed in Proxmox VE: Installation and configuration.oci: docker.io/kanidm/server:1.8.5 pct start 1003 --debug run_buffer: 571 Script exited with status 255 lxc_init: 845 Failed to run lxc.hook.pre-start for container "1003" __lxc_start: 2046 Failed to initialize container "1003" ook" for...
-
CcornySlug replied to the thread Need better quota management.Thanks for the udpate. Would you share the commands/insights with us? I´m stuck at the same problem. Unable to fix anything without the proper commands/documentation.
-
news reacted to UdoB's post in the thread PBS with a volume >100 TB — how do you handle verify? with
Like.
Assuming HDDs: You mentioned Raid6. This gives you the IOPS of a single disk. A verify need to read the actual data, calculate the checksum and compare it with the stored original checksum. There is no single, large file to be read. Instead it... -
DDerekG replied to the thread Realtek RTL8157 (USB-C ---> RJ45).Hi, What host system / type of USB port are you connecting to there?. I've used a few of the USB to 2.5 / 5 / 10Gbps network adapters, and the older USB3.0 ports are not at all stable. I have around 5 different models of these NIC's sitting...
-
bbgeek17 replied to the thread PE8.4.16 Error Removing Snapshot.Hi @csl , more information is needed for proper analyses. - VM configuration: qm config [id] - raw VM configuration: cat /etc/pve/qemu-server/vmid.conf - storage configuration, as requested by @Impact - storage status: pvesm status - if you... -
Rrainca replied to the thread [SOLVED] OPNsense fehlerhafte Memory Erkennung.ok bis ruhig und bye
-
Ccsl posted the thread PE8.4.16 Error Removing Snapshot in Proxmox VE: Installation and configuration.Hi, I had an error in PE8.4.16 removing the snapshot below: It went through all the steps but errored at the end with "does not exist on device 'drive-scsi0'" The host was up running again but there was a padlock next to the name. I tried...
-
-
Bbeisser replied to the thread [SOLVED] OPNsense fehlerhafte Memory Erkennung.es hat aber keiner verstanden, was du wolltest, von daher... vor allem macht es keinen sinn das in einem mehrere jahre alten thread zu posten. das nennt sich thread-nekromantie und ist nicht gern gesehen.
-
UdoB reacted to bbgeek17's post in the thread Unexpected disconnection (every 5 minutes) on Proxmox 9.0.3 with Like.
Given the limited information you are willing to supply, I can only give you a generic advice below. Perhaps someone else will be available to help. - Check that you do not have a duplicate IP on the network - Check system log file: dmesg -... -
UUmbraAtrox replied to the thread [SOLVED] Issues with Intel ARC A770M GPU Passthrough on NUC12SNKi72 (vfio-pci not ready after FLR or bus reset).Tiny11. Win11 pro from Microsofts creation tool debloated by https://github.com/ntdevlabs/tiny11builder Did you try to dump and pass vbios? Idk whether that was why i initially dumped it, but code 43 is in my search history, so best guess...
