Das sieht mir eher so aus, als ob deine EFI-Partition voll ist (siehe [..] espmounts/6C4C-8D6F [..]).
Gib mal bitte proxmox-boot-tool status
Edit:
Probier bitte auch mal
mkdir -p /mnt/esp;mount /dev/disk/by-uuid/6C4C-8D6F /mnt/esp;df -h...
That is what I am attempting to do, using the instructions linked below.
https://pve.proxmox.com/wiki/Migrate_to_Proxmox_VE#Automatic_Import_of_Full_VM
Wenn das ein 0815-Fritzbox Netzwerk ist, dann solltest du die 21 mal durch eine 24 ersetzen. ;-)
PS: und nicht in der /etc/network/interfaces, sondern in der PVE-GUI
Unnötig weil der Ordner nach umount leer sein sollte und man daher das sicherere rmdir benutzen kann.
Gefährlich da hier ; und kein && benutzt wird. Falls umount aus irgendeinem Grund fehlschlägt, kann es sein, dass ungewollt Dateien gelöscht...
To follow up, the error I mention above is only logged at boot. At the time we had just had a client's laptop have recurring failing TPM events and ultimately needed its motherboard replaced.
Using the below steps (source) one can convert to...
multipath_component_detection = 0 needed to be set to 1 in /etc/lvm/lvm.conf - customer set the parameter, which caused this error. Thank you all for your help, I learned alot about iSCSI. Even created my own iSCSI-Target in a debian-vm to test...
search locale
nameserver 127.0.0.1
==> /etc/network/interfaces <==
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network...
Permissions:
root@proxmox1:~# ls -l /mnt/pve/NAS_NFS/
total 38
drwx------ 3 root root 6 Jan 26 14:35 dump
The drive has enough space I presume:
root@proxmox1:~# df -h /mnt/pve/NAS_NFS/
Filesystem Size Used Avail...
Hallo ich habe versucht pve8to9 zu nutzten aber es wir nicht gefunden und habe es versucht zu installieren aber der fehler kamm raus
root@lexis-server:~# apt update && apt install pve-upgrade-9
Ign:1 http://security.debian.org bookworm-security...
This is normal. If it is set to active (instead of passive or guided) then only performance and powersave are supported: https://docs.kernel.org/admin-guide/pm/amd-pstate.html
EDIT: Also, https://wiki.archlinux.org/title/CPU_frequency_scaling as...
Folgende Ausgabe habe ich bei uname -a
Linux pbs 6.17.2-1-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-1 (2025-10-21T11:55Z) x86_64 GNU/Linux
Und folgende Ausgabe habe ich für dpkg -l "*kernel*"
Desired=Unknown/Install/Remove/Purge/Hold...
This solved a particularly unwelcome boot problem. Some hairy ape who shall rename nameless cycled the power one time too many and the resulting lvmid not found grub error was solved with these tips.
I did use lvextend -L +1M though; I was...
OK, what about efibootmgr ?
It seems that proxmox-boot-tool is not set to use grub.. so I'd say either format / init the partition (proxmox-boot-tool init /dev/disk/by-uuid/AED9-4562 grub probably), so that it gets back on grub.
Thanks - there were no prior backups. I setup the encryption from the getgo. I did some internet digging which pointed me at checking the storage cfg, etc.
I was wondering if perhaps I misunderstood that encrypted column - e.g., is it possible...
I don't have ZFS on the boot drive.
I cleared all warnings from pve8to9 prior to apt update && apt dist-upgrade .
I don't have bootctl command available.
I figured it out.
What finally clued me in was a very close watch of the VM boot. When the HBA came up, it was listing one of the drives as "BOOT", even though it was unformatted, had no boot partition, and the PCI passthrough wasn't enable as a...
# proxmox-boot-tool status
Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace..
System currently booted with uefi
AED9-4562 is configured with: uefi (versions: 5.15.158-2-pve, 6.8.12-18-pve, grubx64.efi)