Latest activity
-
FFingerlessGloves posted the thread automated install via PXE boot in Proxmox VE: Installation and configuration.Hi I've setup the proxmox installer to work via PXE boot, and I was hoping I could provide the answers file via the cmdline, since it makes deploying a number of proxmox hosts much easier, from a static http server. Do I need to embed the...
-
BBaris Manco reacted to Eduardo Taboada's post in the thread Install Proxmox on Dell PowerEdge R6515 with RAID1 with
Like.
Its better to put it in IT mode id You want later use ZFS or Ceph for VM storage. You can do that in Idrac/bios -
mkoeppl replied to the thread Adding HA resources to an existing HA affinity rule and outdated manpages.In addition to what @dakralex said, the API for HA rules is indeed a bit different than the one for groups was. So the way to do it right now is to run ha-manager rules set <type> <rule name> --resources vm:100,vm:101,vm:102, listing the all of... -
GGilou replied to the thread [SOLVED] Sync to USB drive fails.I'd say your drive is not in great shape.. check dmesg for info, and try unmounting it / remounting it. But either it was unplugged / badly treated, either it's dying.
-
Ttheb2b replied to the thread [SOLVED] Sync to USB drive fails.findmnt -u /mnt/extdrv1 results; TARGET SOURCE FSTYPE OPTIONS /mnt/extdrv1 /dev/sdc1 ext4 rw,relatime ls-al /mnt/extdriv1 ls: /mnt/extdrv1/: Input/output error ls: /mnt/extdrv1/lost+found: Input/output error ls: /mnt/extdrv1/...
-
Wwalissongois posted the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host in Proxmox VE: Networking and Firewall.Hello everyone, I'm experiencing a recurring network failure on a Proxmox VE host using a Broadcom NetXtreme-E 100G NIC (BCM57504). The NIC stops transmitting, triggers a TX timeout, and then fails to reset correctly. After that, the interface...
-
Mmfederanko replied to the thread bindmount ZFS dataset and children to unprivileged LXC.You can either mount every dataset individually, using something like this: mp0: /Data/Nas,mp=/mnt/Data mp1: /Data/Nas/Documents,mp=/mnt/Data/Docuements mp2: /Data/Nas/Pictures,mp=/mnt/Data/Pictures or specify a lxc mount entry...
-
Ttalos replied to the thread LVM Storage on SAN, new VM and Disk show data from a previous deleted system/disk.Thanks your help, i enabled this feature on my lvm storage and deleted a bigger test vm, i was surprised how fast the zeroing out process is, i expected it to take some times but 512gb was done in around 15 sek. I recreated the VM and there where...
-
Ooberfragger replied to the thread NAS UGreen DXP4800 Plus.Hast du das hier bereits gesehen? https://github.com/miskcoo/ugreen_leds_controller https://github.com/it-an-der-bar/YouTube/blob/main/Ugreen-DXP6800/Proxmox-Lab/Notizen-LED-Status.md...
-
BBlaXioN replied to the thread Proxmox und eine VM mit Ubuntu und Plesk.SDN war der entscheidende Hinweis um schon mal ein ganzes Stück weiterzukommen :) Ja man merkt „fang einfach an wird schon nicht so schwer sein“ kann auch nach hinten losgehen ;) Proxmox ist schon sehr mächtig.
-
CCookiefamily replied to the thread Adding HA resources to an existing HA affinity rule and outdated manpages.Thank you @dakralex that makes a lot of sense. That leaves the question: How does one add a single ha resource to an existing rule via the CLI?
-
FFischje replied to the thread NIC no longer works after kernel upgrade..Sorry for having to reopen the thread, but it's just not working with the AQC113C on the board. It was mistakenly thought to be an issue with the power supply, but after a kernel update from Proxmox, the 10G still doesn't work. I tried to...
-
dakralex replied to the thread Adding HA resources to an existing HA affinity rule and outdated manpages.Hi! The HA groups are deprecated and will be removed eventually by Proxmox VE 10. The reason that the group API endpoints and parameters still exist is because of the state, where not all nodes have been upgraded yet and therefore only a part of... -
jsterr replied to the thread [SOLVED] Validation and questions about iSCSI Config.I tried it again with aliases, everything looks correct until I need to create the pv and vg. I opened a proxmox subscription ticket. -
XGood to know this affects everyone equally :-) We have had discussion on this topic in the past on this forum, It would be nice to get a way to see the softdog status and get logging of when the watchers decide to NOT ping the watchdog for...
-
MMichiel_1afa replied to the thread Watchdog Reboots.Good to know this affects everyone equally :-) We have had discussion on this topic in the past on this forum, It would be nice to get a way to see the softdog status and get logging of when the watchers decide to NOT ping the watchdog for...
-
GGilou replied to the thread [SOLVED] PVE: VM backup to NFS share on Truenas: backup succeeds, but comment and log creation fail.So, I'd just maproot (user) to root (IIRC mapall doesn't apply to root in TrueNAS, and I don't think it's a good idea to map to root anyway..), and fix the permissions (chown -R root: /mnt/pve/NAS_NFS once re-mounted). You don't need non-root...
-
BBlaXioN replied to the thread Proxmox und eine VM mit Ubuntu und Plesk.und natürlich hast du recht, dass ich durch den Hoster keine per DHCP zugeteilte Ip bekommen kann ;) Ich dachte da ehr eine ne Möglichkeit einen eigenen DHCP-Server aufzusetzen. Aber wäre dann etwas chaotisch oder ? ne VM als DHCP die dann...
-
Ffant replied to the thread [SOLVED] No solution found for migration error found stale volume copy.Hi @fiona , It is not always the same offset. The VM has a 32GB disk and I had failures all over this range between 5GB and 25GB. All the respective filesystems have around 1TB and are empty. Storage space is not the íssue here, I think. Funny...
-
JHi, eine Storage-ID muss eindeutig sein und nur einen Eintrag haben. Für Node-spezifische Konfigurationen/Mappings gibt es initiale Patches: https://bugzilla.proxmox.com/show_bug.cgi?id=7200...