Latest activity
-
Iiscrow replied to the thread PVE 9.1 with Kernel 6.17 - Unstable?.Could be related to this: https://forum.proxmox.com/threads/kernel-6-17-bug-with-megaraid-sas-hpe-mr416.178370/ I have the same situation. The only solution I've seen is going to 6.14 but in my case starting with a new proxmox 9.1 install I don't...
-
Mmousi replied to the thread [SOLVED] Only one of IPv4 and IPv6 work in LXC container.For anyone else interested... I solved the issue following the instructions for the patches in this thread: https://forum.proxmox.com/threads/debian-13-lxc-networking-service-failed.169430/
-
Fferhat.oekten reacted to wbumiller's post in the thread VM not starting in routed configuration with
Like.
That error usually happens when you try to use VLANs on a non-vlan-aware bridge without physical interfaces. Try enabling vlan filtering on the bridge. -
https://forum.proxmox.com/threads/performance-comparison-between-zfs-and-lvm.124295/#post-541384 -
Ggreen72 reacted to sleeper52's post in the thread Config for Network UPS Tool (NUT) for Prolink with Like.
Update: I have finally successfully got the Prolink PRO1501SFCU running with NUT. The process and configuration is as below. 1. Ensure the USB cable from the UPS is connected to the Proxmox server 2. SSH into the Proxmox server or open it's...
-
Ich kopiere mal meine Antwort aus einen anderen Thread hier rein ;) Swap will man schon haben, wobei das aber kein physikalischer SWAP sein muss, siehe folgenden Artikel eines Kernel-Entwicklers...
-
jsterr replied to the thread [SOLVED] Validation and questions about iSCSI Config.Im not sure what you are referring to. The file is called /etc/multipath/wwids? and you need to add the wwid of the scsi-disk (Volume on Dell-Storage) presented from the dell storage, which I did by checking the disks from lsblk (the ones from... -
bbgeek17 replied to the thread [SOLVED] Validation and questions about iSCSI Config.@jsterr , have you checked our guide : https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/ Is there anything you feel is missing or unclear? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -... -
Rrdfamily replied to the thread Proxmox Cluster time sync problem.ok, base on this I would then want to get to the point where I can do NTP from my Firewall. I added and third bridge with a port connected to the 10.0.x.x network but I can't add a gateway IP to it so what changes do I need to make to be able to...
-
-
jsterr replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.Did the upgrade, running smooth but had 1 issue and 2 improvements to the docs: Improvements: this command can also give zero output, what should people do then? (could be an improvment to the upgrade guide) this could be added to find out...
-
MMartin.B posted the thread VM disk is readonly after ERROR: "qmp command 'backup' failed - got timeout" in Proxmox VE: Installation and configuration.For the past few weeks, I’ve been experiencing a recurring issue with one of our VMs during backup: - The backup fails on a specific VM, and afterward, the filesystem on the VM switches to read-only mode (screenshot available). - The CPU usage...
-
-
MMax_prx_fan replied to the thread Pveproxy shows non actual status in webinterface.Thanks for the information and feedback.
-
jsterr replied to the thread [SOLVED] Validation and questions about iSCSI Config.Thanks for the reply! I did use wwid via /etc/multipath/wwids (multipath -a WWID) on every node for the lun I wanted to add the mpath devices were automatically created, they appeared after using multipath -a, multipath -r and multipath -ll We...
-
SSteveITS replied to the thread Experiencing slow OSDs after upgrading Ceph version 18 to 19 in Proxmox v8.4.Right, the warning didn't exist prior to 19.2.1 (https://docs.ceph.com/en/latest/releases/squid/#v19-2-1-squid:~:text=Warning%20added%20for%20slow%20operations), at least in the 19.x branch. Looks like in Reef it was added in 18.2.5. So it's...
-
Bbl1mp reacted to mariol's post in the thread One Host in Cluster stop allowing authentication with Like.
All right. Maybe check the time too on all nodes. There might be a time drift.
-
JJohannes S reacted to bbgeek17's post in the thread [SOLVED] Validation and questions about iSCSI Config with Like.
If over time you have tried multiple experiments, the letter based device may already have been used by something. Kernel will allocate new device on each node independently. The disk signature will be identical across the nodes, so the letter is...
-
fiona replied to the thread Disk migration speed is capped by disk read/write limits in PVE 9.The plan to fix this is to go back to using the limits only on the VM-facing front-end devices rather than the block nodes where the mirror job operates. I sent a preparatory patch upstream. Two possible workarounds for now: 1. use machine... -
bbgeek17 replied to the thread [SOLVED] Validation and questions about iSCSI Config.If over time you have tried multiple experiments, the letter based device may already have been used by something. Kernel will allocate new device on each node independently. The disk signature will be identical across the nodes, so the letter is...
-
JJohannes S replied to the thread Hohe SWAP Auslastung.Will man nicht gerade dann (außer Compilance-/Security-Erwägungen sprechen dagegen) KSM verwenden, damit man noch Luft über hat? Davon abgesehen scheint beim OP ja eh das Hauptproblem der CPU-Typ gewesen zu sein.
-
JDie discard option hat nicht direkt etwas mit dem physischen Speicher zu tun. Wir arbeiten hier mit virtuellen Festplatten. ZFS, LVM-Thin sowie QCOW2 kann alles thin provisioning. Ist zwar auch in meinem Link verlinkt aber ließ das auch mal...
