Latest activity
-
HHikari0110 replied to the thread How to properly add a ISO file whitout get the "Error 0 occurred while receiving the document".its said df: /path: No such file or directory
-
HHikari0110 posted the thread How to properly add a ISO file whitout get the "Error 0 occurred while receiving the document" in Proxmox VE: Installation and configuration.deployed my first Proxmox server in a Vmware nested environment. But when I try to add the ISO file, I get the following message: "Error 0 occurred while receiving the document" I am login with the root user into the Proxmox server version 9.1.1...
-
-
HHikari0110 replied to the thread How to properly add a ISO file whitout get the "Error 0 occurred while receiving the document".why mine du -sh /var/tmp just has 81MB eventhough i created the disk storage 200GB
-
Jjt_telrite replied to the thread TrueNAS Storage Plugin.Here is the dmesg log showing the IO-ERROR I encountered. It's happening on a second server so not NIC failure
-
Ffalanca replied to the thread Bug Report: Realtek 2.5Gbps Ethernet downgraded to 100Mbps with kernel 6.17!.Done!
-
DDerekG reacted to bbgeek17's post in the thread A guard rail suggestion to avoid losing everything like I just did. with
Like.
Hi @anthony1956 , welcome to the forum. While I sympathize with your situation and your request, we have all been there, what you are proposing is essentially a "knee-jerk" reaction and has very little chance of being implemented. It may make... -
Ddigipen79 replied to the thread Node going offline after setting up VMs to migrate.HA went offline specifically. I have 2 network connections on each node, one going to my regular network connected to the Internet, and one specifically for the nodes themselves, both 10G connections. I was able to get the node back online by...
-
DDerekG replied to the thread Questions of a Newbie about virtualization of PBS.Hi exaveal, The question should not be, is it possible, but how would you recover should the host die when it is hosting both the PVS & PBS.??? I'm assuming that you are not backing up the full 12TB of Proxmox VM's/LXC's along with the media...
-
JJohannes S replied to the thread ProxMox RAM usage problem for Zabbix.Install zabbix agent direct inside the vm. See also: https://forum.proxmox.com/threads/fabc-why-is-proxmoxve-using-all-my-ram-and-why-cant-i-see-the-real-ram-usage-of-the-vms-in-the-dashboard.165943/
-
Ddemavares replied to the thread [SOLVED] Proxmox is not loading.I fixed it. 1. Use the command lsblk -f to locate the vfat partition. 2. Run proxmox-boot-tool init /dev/XXX (Replace /dev/XXX with your actual partition. In my case it was /dev/sda2). 3. Run proxmox-boot-tool refresh. 4. Run...
-
Uuzumo replied to the thread [SOLVED] AMD RX 7800/9070 XT vendor-reset?.General passthrough can be configured using the information published by Proxmox. For some devices, the configuration method becomes complex. Given the wide variety of devices in existence, settings tailored to each specific device are...
-
Ddemavares replied to the thread [SOLVED] Proxmox is not loading.root@pve:~# proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. E: /etc/kernel/proxmox-boot-uuids does not exist.
-
Ddrwtsn32 replied to the thread High network throughput causes high CPU usage in VM.Actually now that I'm thinking about it, doesn't passthrough NIC reduce CPU usage on the host not really the guest? If that's the case, seems like it's not the right path forward as it's VM CPU usage that seems to be an issue. In any case, I...
-
bbgeek17 replied to the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect..I'd recommend getting familiar with using CLI and doing it via physical console. Since it's the only IP on your system, any mistake (UI or CLI) will cause access disruption to the system. Just take address and gateway lines and move it under... -
Ssethgreenfield posted the thread Templates and VM Cloning Fails with iSCSI Configuration in Proxmox VE: Installation and configuration.Hey All, I currently have 5 Proxmox 9 servers clustered and working well. I'm using a TrueNAS M40 for Block Storage via iSCSI. I cannot successfully get templates to clone off of, or successfully clone a VM. VMs are running fine. Hiccup we've...
-
Aaztekapride replied to the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect..Can this be done via the GUI to minimize possible errors?
-
Jjaminmc replied to the thread ZFS bug causing kernel panic when accessing snapshots - fix in OpenZFS v2.4.0, is there a simple upgrade?.Well, My post has already been made obsolete in less than 24 hours!!!! The latest update for 6.17.9-1-pve on Proxmox GIT has OpenZFS 2.4.0 on it now! Just skip the step of replacing the OpenZFS part. It should be in the Testing repo soon! But for...
-
bbgeek17 replied to the thread Help me understand my storage options.Start-to-end? No. You need to perform a subset from CLI. Especially if Multipath is involved. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Mmhentrich replied to the thread Help me understand my storage options.Thanks, are any of these options available in the GUI?
