Latest activity
-
SStarlights posted the thread Versuch zur Einrichtung von NAT fehlgeschlagen, kein Zugriff zum System in Proxmox VE (Deutsch/German).Hallo Liebe Proxmox Community, ich beschäftige mich erst seit kurzem mit Linux und Proxmox. Nach der Installation wollte ich meine Netzwerkkonfiguration NAT wie in VMware Workstation konfigurieren. Aktuell komme ich an Proxmox nicht mehr ran...
-
bbgeek17 replied to the thread Help me understand my storage options.Hi @mhentrich . You can use either iSCSI or FC. The resulting view from PVE perspective is the same. You are correct that you would present LUNs, or single large LUN, to your hosts. You would then use LVM, not LVM-thin. You will be able to use... -
Mmhentrich posted the thread Help me understand my storage options in Proxmox VE: Installation and configuration.Hello - setting up a Proxmox 9.1 cluster to connect to a Dell PowerStore SAN. I could do iSCSI or FC but would prefer to do FC. I need to maintain the ability to do VM snapshots and would prefer to be able to do Proxmox HA (though not strictly...
-
Cccolotti replied to the thread LXC consoles sometimes work, other times have no prompt.Actually for me turned out this was related to Nesting on new community scripts that I used and selected NO to nesting. Once I redeployed them with nesting enabled all works as expected. The previous scripts did not give the choice now they do...
-
TTheBokke posted the thread Cannot snapshot VM - VFIO migration not supported in Proxmox VE: Installation and configuration.Hi folks, I'm trying to snapshot a VM running TrueNAS Scale. Never had any issues before, but when trying to create the snapshot I get this error: TASK ERROR: VM 100 qmp command 'savevm-start' failed - 0000:01:00.0: VFIO migration is not...
-
MMouldMox posted the thread PCI Switching (Swapping PCI-e passthrough per-VM) in Proxmox VE: Installation and configuration.Hi everyone! This is my first post, so apologies if it's in the wrong place. I have a very specific use-case that I would like to achieve, I'm new to proxmox and hypervisors as a whole, but I've learned a lot over the past month or so and I've...
-
bbgeek17 replied to the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect..Welcome to the forum @aztekapride . You need to move the IP address from the bond0.340 to the bridge, and move the bridge to the bond0.340. That is the most common approach. Otherwise, you will need to tag the traffic in VM internally...
-
VVasily Poterjyko replied to the thread ProxMox RAM usage problem for Zabbix.Has there been a solution to this problem? We're experiencing exactly the same behavior. Zabbix collects information directly from PVE and often produces false positives about memory on Linux VMs, which is very distracting and interferes with...
-
Aaztekapride posted the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect. in Proxmox VE: Networking and Firewall.I have a ProxMox Cluster created from two Dell Servers. I was able to create a bond and get onto the network. I created a bridge (vmbr0) and attached the bridge to the virtual machine but the machine cannot get on the network. The IP Address for...
-
-
SSkippyTheMagnificent replied to the thread [SOLVED] - Can't seem to upgrade....Yeah, I was wrong about that. Apparently, I had closed the tab I was on and when re-opening it, it had cached credentials and skipped it. After logging out and back in, it's still there.
-
Jjaminmc replied to the thread [SOLVED] AMD RX 7800/9070 XT vendor-reset?.I see this is reported as solved. Can you update your first post with the solution, in case someone else has the same problem?
-
Bbufalla replied to the thread Win 2025 Installation.Erledigt, lag an der Windows Server 2025 gepatchen Version :-(
-
KKingneutron replied to the thread LXC consoles sometimes work, other times have no prompt.Change LXC Options / Console mode to /dev/console, full shutdown LXC and cold-boot it - should work
-
Ddemavares replied to the thread [SOLVED] Proxmox is not loading.My /etc/default/gru GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`( . /etc/os-release && echo ${NAME} )` GRUB_CMDLINE_LINUX_DEFAULT="quiet" GRUB_CMDLINE_LINUX=""
-
SSteelVortex replied to the thread cluster node does not go into maintenance mode.I have both nodes upgraded now, and I’m still seeing the same problem. I have not taken any action with the qdevice; however, as you stated, it is not mentioned at all in the documentation. I do have a third node, so in theory, I could remove the...
-
Aalexskysilk replied to the thread proxmox 8 - how migrate vm without shared storage ?.I suppose the real question is- why are you migrating a VM from your "production" group members to the "backup" group? if its for backup, you can and should use PBS for the purpose. If you were interested in actually running that workload on a...
-
Hhille replied to the thread Random host freeze after 60–80h uptime (Intel N150, Proxmox VE 8.x / kernel 6.14) – no logs, full system hang.Maybe its connected, but my proxmox host froze fully like a few minutes ago with not even registering keyboard input from a physically connected keyboard (not even sysrq). After pulling the cords from my server I cant find anything in the logs...
-
Ccomplexplaster27 reacted to fiona's post in the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk with
Like.
Hi @complexplaster27, thank you for the report! There is a bug and the Windows UEFI CA 2023 is not enrolled as part of the qm enroll-efi-keys command, only the Microsoft UEFI CA 2023 and the KEK. Newly created EFI disks do contain it. This might... -
SSteelVortex replied to the thread cluster node does not go into maintenance mode.
-
CWie @*alx* bereits schrieb ist das hier ein Proxmox-Forum und nicht für den Support jeglicher IT-Fragen gedacht. Ich kann Dich an die folgenden möglichen Orte verweisen, welche Dir ggf. helfen: https://www.reddit.com/r/de_EDV/...
