Latest activity
-
JJohannes S replied to the thread Hohe SWAP Auslastung.Das habe ich auf dem Handy nicht gesehen, sorry :(
-
THeres my issue I reinstalled Proxmox DMC and tried to add my nodes to the DMC and I'm greeted with this message how can I remove the previous fingerprint from the first installation so I can use the node fingerprint again?
-
-
JHello, I am currently working on creating ProxmoxVE Installation Media to automatically install and configure three of our nodes. Following https://pve.proxmox.com/wiki/Automated_Installation I came up with a combination of answerfile.toml and...
-
Mmpit posted the thread Modifying ISO for Automated Installation in Proxmox VE: Installation and configuration.Hello, I am currently working on creating ProxmoxVE Installation Media to automatically install and configure three of our nodes. Following https://pve.proxmox.com/wiki/Automated_Installation I came up with a combination of answerfile.toml and...
-
Mmuekno reacted to bbgeek17's post in the thread [SOLVED] How to enable the 'non-free-firmware' component in the apt sources and run: with
Like.
Does changing your repo file to below work? : deb http://ftp.de.debian.org/debian bookworm main contrib non-free-firmware deb http://ftp.de.debian.org/debian bookworm-updates main contrib non-free-firmware deb http://security.debian.org... -
Mmuekno replied to the thread [SOLVED] got "WARN: systemd-boot package installed on legacy-boot system is not necessary, consider removing it".So if I understand it right, I just have to delete /etc/initramfs/post-update.d/systemd-boot
-
Mmuekno reacted to Eduardo Taboada's post in the thread [SOLVED] got "WARN: systemd-boot package installed on legacy-boot system is not necessary, consider removing it" with Like.
As you can see in the upgrade intructions: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9 In the section "Systemd-boot meta-package changes the bootloader configuration automatically and should be uninstalled As Proxmox Systems usually use...
-
Ffant replied to the thread Proxmox + shared LVM.Any news on this topic? I tink I found the very same trap. I have LVM-thick on shared iSCSI device. I can move qcow2 file of existing VMs to there and they work. However, I cannot re-assign a disk image located there to another VM. If I move a...
-
aaron reacted to bbgeek17's post in the thread [SOLVED] Not able to add any of my 3 proxmox nodes to PDM with Like.
You can also try curl -k https://[fqdn or IP]:8006 , this will show not only that the port is open but that you get a full response. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Bbaalkor posted the thread [SOLVED] TRIM/Discard schedule vs discard in Proxmox VE: Installation and configuration.Hello, We're using an LVM on top of iSCSI presented by a SAN. We've seen that the de-duplication factor sold by the vendor (Dell PowerStore) promised to be 5:1 is definitely not reached. However, the vendors told us that we might need to enable...
-
Mmicneu replied to the thread CGNAT mit Wireguard überwinden.Ich schließe mich an, hat nix mit Proxmox zu tun. Wenn du fit in Sachen VPN bist sollte man mit etwas nachdenken auch so möglich sein. Ich habe es bei mir mal zum Spass umgesetzt mit wireguard auf meinem hetzner Rechner den Server eingerichtet...
-
bbgeek17 replied to the thread [SOLVED] How to enable the 'non-free-firmware' component in the apt sources and run:.Does changing your repo file to below work? : deb http://ftp.de.debian.org/debian bookworm main contrib non-free-firmware deb http://ftp.de.debian.org/debian bookworm-updates main contrib non-free-firmware deb http://security.debian.org... -
MWie @*alx* bereits schrieb ist das hier ein Proxmox-Forum und nicht für den Support jeglicher IT-Fragen gedacht. Ich kann Dich an die folgenden möglichen Orte verweisen, welche Dir ggf. helfen: https://www.reddit.com/r/de_EDV/...
-
MWas hat das mit Proxmox zu tun?
-
EEduardo Taboada replied to the thread [SOLVED] got "WARN: systemd-boot package installed on legacy-boot system is not necessary, consider removing it".As you can see in the upgrade intructions: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9 In the section "Systemd-boot meta-package changes the bootloader configuration automatically and should be uninstalled As Proxmox Systems usually use...
-
BBobhWasatch replied to the thread [Suggestion] Let VirtIO-GPU support max_outputs..Multi monitors work fine for me using xrdp on Debian with the regular Windows client or with krdc. Xrdp is much easier to set up now on Debian 13 since there is now "pipewire-module-xrdp" so you don't have to compile stuff to get sound.
-
Mmuekno posted the thread [SOLVED] How to enable the 'non-free-firmware' component in the apt sources and run: in Proxmox VE: Installation and configuration.have a 8.x PVe installed from a 8.x installer, My sources.list shows deb http://ftp.de.debian.org/debian bookworm main contrib deb http://ftp.de.debian.org/debian bookworm-updates main contrib # security updates deb http://security.debian.org...
-
BBobhWasatch replied to the thread Proxmox random crashes without logs.Somebody makes a RAM stick called "G Skill Ripjaws RAM"? LOL! The way PC vendors name things, especially in the gaming space, is pretty hilarious. I mean, wow, it is just a memory stick. Off-topic, sorry, but I found it funny.
-
Mmuekno posted the thread [SOLVED] got "WARN: systemd-boot package installed on legacy-boot system is not necessary, consider removing it" in Proxmox VE: Installation and configuration.Do not really understand this.installed the system from an 8.x Proxmox instaler
-
ggoller replied to the thread SDN OpenFabric set MTU?./etc/network/interfaces.d/sdn will be overwritten by the sdn stack, so adding the mtu in /etc/network/interfaces is correct. ifupdown2 will merge the config on reload.
