Latest activity
-
Tthomsa replied to the thread Proxmox alle ca zwei Wochen nicht erreichbar.Danke euch für euren Support. Ich will meinen Plan erstmal trotz eurer kritischen berechtigten Kommentare fortführen und homeassistent mit proxmox auf dem dell wyse nutzen. Ich habe mir jetzt eine zwar gebrauchte aber erst mit ein paar 100...
-
JSoweit ich weiß setzt PBS das ohnehin explizit. Ich selbst nutze meist entweder relatime oder lazytime. Relevant: - https://forum.proxmox.com/threads/zpool-atime-turned-off-effect-on-garbage-collection.76590/#post-451830 -...
-
Ttonnorprox replied to the thread network config via api.got it ..... use "POST" to lay in the changes and "PUT" to activate them
-
RR0cc0Naut replied to the thread kein GUI nach update auf V9.ich bin nun mit der iso unter rescue boot wieder im System. Ist gestartet und alle Daten sind da. Wie kriege ich nun raus wo der Fehler lag?
-
Mmocha reacted to Chris's post in the thread proxmox-backup-client Floating point exception(core dumped) with
Like.
Okay, I'm able to reproduce the floating point exception using the latest openSuse Slowroll ISO and the mentioned statically linked proxmox-backup-client version when triggered via a systemd service. From the core dump I could extract the... -
UdoB replied to the thread [SOLVED] difference between host screen and effective IP.For an example look at https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_13_Trixie#Ensure_Hostname_Resolves_to_Hosts_IP_Address -
SStereoscope replied to the thread Installing Fresh Proxmox - ZFS pool named 'rpool' already exists.I needed to re-install Proxmox again and ran into this issue again. I booted into a live Ubuntu instance and ran wipefs command on all drives that I wanted to use to install Proxmox onto. Didn't work. It looks like the commands ran fine, but same...
-
UdoB reacted to leesteken's post in the thread [SOLVED] difference between host screen and effective IP with Like.
Check your /etc/hosts and /etc/network/interfaces. Please note that Proxmox does not support DHCP out of the box and it's best to use a static IP address outside the DHCP-range of the router.
-
UdoB replied to the thread Bug Report: Realtek 2.5Gbps Ethernet downgraded to 100Mbps with kernel 6.17!.While there are some staff members actively supporting this community-forum (thanks for that!) the recommended way to be more visible to the developers is to put it into the official bug tracker...
-
HHellYeah1994 replied to the thread ESXi → Proxmox migration: Host CPU vs x86-64-v4-AES performance & 10 Gbit VirtIO speeds.So you tested the bandwidth like this: VM -> OPNsense (VM) -> VM? Do you need OPNsense for a specific reason? Because even with bare metal, it's not easy to get 10Gbit routing speed out of OPNsense/pfSense. You can switch to a Linux-based FW...
-
Mmuekno replied to the thread [SOLVED] difference between host screen and effective IP.Can anybody pleasw help solve this propblem or confir it does not harm the upgrade to 9.x
-
Jjohnoathome replied to the thread ZFS defaults to /dev/disk/by-id.Well I thought I would update this thread with a very simple solution. I switched to legacy USB storage mode by forcing fallback from UAS (USB Attached SCSI) to the older usb-storage driver. echo "options usb-storage quirks=2109:0715:u" | sudo...
-
dcsapak replied to the thread H200 NVL vGPU on Proxmox.if you test it and it works, and you want it to be officially supported, it wouldn't hurt to tell nvidia that you want proxmox as supported platform :) -
Tthorsten.franke replied to the thread Hohe SWAP Auslastung.Hi, da kommt einfach nur ne 0... Und ja.... ich habe 2 RAIDs.... das erste Boot und System RAID und nen Daten RAID mit ZFS Mirror.... In dem Fall wäre SWAP auf der Boot.... Grüße Thorsten
-
TSee https://forum.proxmox.com/threads/ceph-20-2-tentacle-release-available-as-test-preview-and-ceph-18-2-reef-soon-to-be-fully-eol.178960/
-
Ssaskog replied to the thread Update Installed -- System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!.Thank you very much for your help. I am always a bit nervous when it comes to boot loader issues when working on remote systems. Best regards, JF
-
RR0cc0Naut replied to the thread kein GUI nach update auf V9.jetzt bootet die Kiste nicht mal mehr. Habe das Update noch mal gemacht, vorher war auch alles OK laut dem Script. Geht direkt ins Bios. Das script scheint ja echt toll zu sein.
-
RRaudi replied to the thread [SOLVED] Emulator in Windows VM will nicht....Danke für deine Zeit @ThoSo und fürs schauen! Hardware Version, die könnte ich mal runter drehen... Bei der CPU habe ich diverses getestet, mit aktuell sowie Host und bin dann bei Pentium 3 stehen geblieben. Hat die NUMA Einstellung bei einer...
-
Rrobertlukan replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Let me elaborate a bit more regarding this issue. After the kernel upgrade of PBS the situation has improved. But I need to say it is still not as it used to be. I have noticed that some backups of a random VM takes way longer as it should be...
-
AAllanA replied to the thread Unusual I/O Delay on Proxmox 8.4 with ZFS RAID-Z1.Dear everyone, Sorry for the waiting time. I got many problems to resolve before this issue. I found solution to my Unusual I/O Delay on Proxmox 8.4 with ZFS RAID-Z1. I've placed 2 - 764903-001 HPE NVMe SCN, SSD, NVMe PCIe in mirror SLOG and...