Latest activity
-
Rricharda reacted to Impact's post in the thread [SOLVED] How to disable a PBS pull sync job with
Like.
Just set the sync schedule to none. -
TTomm replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.update: When I connect the SFP module with ipaddress 192.168.8.253/24 and ping that address from my workstation, it responds. It stopped responding after I pulled the ethernet cable. Re-insert the ethernet cable and the ping continues. I...
-
Mmirmalag posted the thread Backup randomly fails on Synology NAS in Proxmox VE: Installation and configuration.I have troubles backing up an LXC container on PROXMOX VE 9. I do it as a backup job that saves shapshot images on a NAS. Strange thing is that it happens sometimes, not always. Traced error is: 2026-01-10 01:05:02 INFO: zstd: error 70 : Write...
-
Mmicneu reacted to Browbeat's post in the thread Über OpenVPN (Trixie im LXC) auf Samba-Freigabe (QNAP mit Trixie als BS) im Heimnetzwerk zugreifen with Like.
Wenn man keine Basics kennt, dann lässt man die Finger von Proxmox... Ein VPN Server gehört auch nicht hinter einen Router sondern der läuft auf dem Router...
-
Hello Nick, I've always hated the NetApp sales in Germany, who present NetApp as the optimal block storage for VMware. I always perceived NetApp as the best filer and the Ontap products probably still are. VMware's strong focus on block storage... -
Bbeisser replied to the thread [SOLVED] Mirrored boot pool degraded due to PVE not recognizing one of the drives though lsblk recognizes both the drives..if the disk shows a 0 byte, it has a very high chance of beeing dead. you can install the nvme-cli package and run nvme list to give output like this: root@pve2:~# nvme list Node Generic SN Model...
-
Wwaltar replied to the thread Performance Probleme.Config richtig lesen !! Was da angelegt wurde ist "vergleichsweise in zfs Logik": Lege auf allen 12 nvme 2 Partitionen (oder namespaces) an, eine kleine und eine große (vergessen der Einfachheit hier mal den bootmanager), zpool create rpool...
-
Rricharda posted the thread [SOLVED] How to disable a PBS pull sync job in Proxmox Backup: Installation and configuration.Hi all, bit of a problem could use some help with please. Running PBS 4.1.1 I need to pause a sync job for some maintenance, but the enable box doesnt seem to be in the GUI anymore (I am sure it was there when I setup in 3.x). My query is, how...
-
gurubert reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Hi Community! The recently released Ceph 20.2 Tentacle is now available on the Proxmox Ceph test repository for installation or upgrade. Upgrades from Squid to Tentacle: You can find the upgrade how-to here...
-
EErnst T. replied to the thread Very slow creation of LXC (Proxmox 9).You have an IO problem. With PVE9, creating and backing up/restoring LXCs is about as fast as with PVE8. I tested it with the same template and everything is OK under PVE 9.1.4. vzcreate: 3s vzdump: 5s vzrestore: 3s
-
-
EMaybe this can help: https://gist.github.com/Impact123/3dbd7e0ddaf47c5539708a9cbcaab9e3#io-debugging Can you share lsblk -o+FSTYPE,MODEL?
-
Aaabye replied to the thread PBS: every 3 days PBS become unstable.Datastores are local. How can I check if there is something with prunes or are there any timeouts?
-
B@begeis I'm not sure from your a little blurred screenshot, but I guess you want to use the card with a the name beginning with enx6c... Then in /etc/network/interfaces add the line iface enx6cSOMEHARDLYREADABLECHARACTERS inet manual and in...
-
Ffsk17 reacted to gkonrad's post in the thread [SOLVED] command 'apt-get update' failed: exit code 100 with Like.
Dear Wbravin, I had a similar problem. Please watch this video. Robert kindly explains why you are getting this message and what you should do. (please note that I am a newcomer here) https://www.youtube.com/watch?v=5AumO9AKKB0
-
cwt replied to the thread PBS: every 3 days PBS become unstable.Are the datastores local or remote? Every 3 days sounds like a prune or verify job which then runs into a timeout/lock. -
AArvest reacted to pmet's post in the thread [SOLVED] Can't create VMs on PVE 9.1.1 - Empty "Confirm" tab with Like.
nano /usr/share/pve-manager/js/pvemanagerlib.js find: deleteSet.keys().toArray().join(',') replace: Array.from(deleteSet.keys()).join(',') worked for me [win7 .chrome. 109.0.5414.120]
-
Why would you expect the VM desktop to be visible on the Proxmox host? Proxmox, as an clustered enterprise hypervisor, is managed remotely. You are supposed to access VMs from another computer using a web browser (and protocols like VNC, SPICE or... -
UdoB replied to the thread [SOLVED] VM crashes Node.To give a single VM 83 % of the system RAM may be problematic, sometimes. I would start with 30 GiB and then 40 GiB - and I wouldn't be surprised if that works well. Sidenote, probably not relevant for that "Oops": that CPU has eight...
-
Ggusto replied to the thread Very slow creation of LXC (Proxmox 9).Today I updated Proxmox to 9.1.4 and rebooted. I still have problems. LXC (debian 13) takes 70-90 seconds to create. Restoring takes the same amount of time. It's pure LXC (the compressed backup is not even 250MB). zpool status -v pool...
-
Rrandomforest2 replied to the thread Proxmox Randomly Dies.Update for the 3rd occurrence: It happened multiple times when I try to install a fresh copy on a new SSD. It just randomly happen during the installation, won't stuck at the same place twice. And it looks like this:
-
