Latest activity
-
SSteelVortex posted the thread cluster node does not go into maintenance mode in Proxmox VE: Installation and configuration.I'm seeing a strange problem after updating a cluster node from 8.4.14 to 9.1.4. When I run ha-manager crm-command node-maintenance enable <NODE-NAME> the server never enters into maintenance mode. The below output is from the problematic node...
-
Falk R. replied to the thread Guidance Needed to Improve Sync Performance on 10 Mbps Link.This sounds, you dont use the Sync Feature from PBS. I have a Customer with a Location Connected over 2 MBit and this works Fine. Can you describe your Configuration? -
Falk R. replied to the thread Proxmox Backup Server mit S3.Günstiger Speicher ist relativ und je nach Menge habe ich dedizierte PBS bei Hetzner günstiger pro TB laufen, als man das mit S3 hinbekommen kann. Außerdem kann man das über die Retention einstellen. Der „Move“ bei Veeam ist nur eine...
-
WWinter0916 reacted to fabian's post in the thread Server 2022 defrag/trim pegging CPU and RAM with
Like.
see some discussion here: https://bugzilla.proxmox.com/show_bug.cgi?id=5552 -
WWinter0916 reacted to robertlukan's post in the thread Server 2022 defrag/trim pegging CPU and RAM with Like.
If this is a known issue for VM Server 2022+, I guess it might be a good idea to include this in the default profile setting when selecting Windows Server 2022+ while creating a VM ? Personally, I have not came across this issue, as I ran only...
-
ZI was wondering if maybe i'm bad at reading these days, but is there a method of performing NAT (source and dest) via the SDN purely through proxmox? I really want to get rid of the need for a dedicated routing VM or manually configuring...
-
-
MMigsi replied to the thread apparmor denies dhclient socket.I tried both, reloading first, then rebooting. Had always the same result :/ The lease time for this network is set to 30 minutes, which indeed is low for a servers only network, but not low enough to explain this level of spamming. I'm on a...
-
LLaWLi replied to the thread Could I use the W-Lan of my Proxmox as an Access Point?.Was a lot of searching but now it works. Now I have W-Lan with working W-Lan Roaming: /etc/hostapd.conf interface=wlp4s0 bridge=vmbr0 driver=nl80211 ssid=My Home hw_mode=g channel=6 wmm_enabled=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0...
-
JJabecca replied to the thread Viewing VM on Host Machine.I’ve decided to take the plunge and change my computer and security system at my property. I was running Blue Iris on a Windows 10 system with a Cisco 3750 switch, but I’m over the problems faced ever time there was a windows update or change. I...
-
Tealk replied to the thread Proxmox Backup Server mit S3.Dann bringt mir das nichts, ich brauche günstigen speicher -
Würde in diesem Fall aber nicht erklären, warum eine Filecopy bei ihm mit mehreren GB/s läuft, das Backup aber nicht. Idee: Vielleicht schon: Das Backup wird in Chunks geschrieben, die Filecopy ist eine Datei. Vllt in diese Richtung denken? -
JHi All, ProxMox is new to me and there are a number of things I’m having trouble with so I’m after some assistance or advice. I have a bare metal Proxmox VE installation running on a HP Elitedesk desktop. There is a VM installed for Ubuntu...
-
EHi, I am having this issue where I am rebuilding my NixOS VM to use Ollama and the VM hangs. A couple of seconds later the node it's in reboots. I am using PCI passthrough for the Nvidia GPU, so the VM should have full access to it, including...
-
-
SSchwielowNET reacted to fabian's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like.
1. we did fix the issue we could reproduce quite fast 2. despite this long thread, only a (small!) subset of systems is affected, which is the reason why we haven't been able to reproduce the remaining issue at all so far, despite many hours...
-
Aalexskysilk replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.using PDM to instantly migrate a vm between clusters.
-
Here are the steps: root@pve1:~# wget https://github.com/intel/ethernet-linux-ixgbe/releases/download/v6.3.4/ixgbe-6.3.4.tar.gz root@pve1:~# tar xvpf ixgbe-6.3.4.tar.gz root@pve1:~# cd ixgbe-6.3.4/src/ root@pve1:~/ixgbe-6.3.4/src# apt install... -
aaron replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.do you mean this: What would be a use case you have in mind? Because there are ways to import disk images in a storage-agnostic way. Integrating special features for a very specific storage would need to have a good use case to warrant the... -
Das Forum hier ist community support. Für Support vom Proxmox Support Team gibts es das Kundencenter. Dort kann ein Ticket eröffnet werden.
-
fstrankowski replied to the thread Auf verlorenem Posten ohne Netz.Ich machs mal kurz und empfehle Neuinstallation + Backups einspielen :D
-
fstrankowski reacted to _gabriel's post in the thread [SOLVED] Extremely low speeds when backuping with Like.
Run tailscale status and examine the connection information for the peer device. If the output contains "direct", the connection is direct. If the output includes "relay", the connection is relayed through a DERP server. If the output includes...
