Latest activity

What's new Featured content New posts New profile posts Latest activity
  • fstrankowski
    fstrankowski replied to the thread [SOLVED] Extremely low speeds when backuping.
    Jeez. Whoising the IP from the log file to be necessary instead that the user provides such information beforehand is ... well .. wow. Good find!
  • R
    robertlukan reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like Like.
    Hi Community! The recently released Ceph 20.2 Tentacle is now available on the Proxmox Ceph test repository for installation or upgrade. Upgrades from Squid to Tentacle: You can find the upgrade how-to here...
  • Falk R.
    Falk R. replied to the thread Performance Probleme.
    Ja das ist tatsächlich schlecht zu testen. Ich habe schon mehrere Server mit PCIe Switch gesehen und keiner lief gut. Entweder schlechte Benchmarks bei kleinen I/O bis zu Instabilität. Ich traue den Dingern kein Stück mehr über den Weg.
  • K
    Kingneutron reacted to derpy588's post in the thread [SOLVED] Unable to unmount zfs with Like Like.
    Was able to fix. I think when attempting my first install I was using iDRAC HMTL5 console with virtual media and it must have disconnected. When attempting again, it installed without errors and is running well now.
  • N
    Nerion replied to the thread Performance Probleme.
    Ja hast recht ab 8 NVMe ist ein Switch verbaut. Meinst der macht die Probleme? Dann stellt sich nur die Frage warum man dies mit einem fio test nicht reproduzieren kann. 4 NVMe ziehen würde bedeuten ich muss den komplett umbauen und schauen was...
  • Falk R.
    Falk R. replied to the thread Performance Probleme.
    Sinnvoll ist das aber trotzdem nicht. Man bremst die NVMe massiv aus.
  • Falk R.
    Falk R. replied to the thread Performance Probleme.
    Was Dell Vertriebler zusammenstellen, da gibt’s teilweise ganz schlimme Sachen. Aber das der so gebaut wurde wundert mich. Daher vermute ich einen PCIe Switch
  • N
    Nerion replied to the thread Performance Probleme.
    Bei einem R660 gehen nur 8 NVMe Bei einem R760 gehen 24 NVMe mit zwei Controller. Wobei jeder Controller 12 NVMe kann
  • N
    Nerion replied to the thread Performance Probleme.
    Interessanr, das wurde so direkt von Dell zusammengestellt und ist ab Dell Werk so und ist auch Offiziell Supported.
  • Falk R.
    Falk R. reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like Like.
    Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
  • A
    alexskysilk replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.
    The most interesting feature in Tentacle with direct relevence to PVE is the instant RBD live migration. @t.lamprecht have you guys discussed implementation within PVE, and if so can you share your thoughts?
  • Falk R.
    Falk R. replied to the thread Performance Probleme.
    Die Einstellungen der Controller sind in Ordnung, mich wundert aber wie ihr 12 NVMe an den Controller bekommen habt. Laut Dell Support gehen da maximal 8 NVMe dran. Die Diskussion hatte sich ch mit dem Support für einen anderen Kunden. Ich weiß...
  • D
    derpy588 replied to the thread [SOLVED] Unable to unmount zfs.
    Was able to fix. I think when attempting my first install I was using iDRAC HMTL5 console with virtual media and it must have disconnected. When attempting again, it installed without errors and is running well now.
  • Falk R.
    Falk R. replied to the thread Performance Probleme.
    Die Trennung ist schon sinnvoll. Mache ich auch seit vielen Jahren so. Read Ahead Cache wäre gut, erklärt aber nicht das Problem.
  • aaron
    aaron replied to the thread Ceph installer GUI question.
    One more follow up. By having the host part in there as well, it is very clear which subnet is used, when you are not using a /24, but for example a /26. For example with 10.10.20.81/26 as host IP: The result would be that the network ID address...
  • C
    CamoMike reacted to adrian_vg's post in the thread Resize LXC DISK on Proxmox with Like Like.
    Nevermind, found out how. Documenting it here for posterity. :-) On your proxmox node, do this. List the containers: pct list Stop the particular container you want to resize: pct stop 999 Find out it's path on the node: lvdisplay | grep "LV...
  • S
    Stefan Radman replied to the thread Trixie Updates Question.
    Here are the steps: root@pve1:~# wget https://github.com/intel/ethernet-linux-ixgbe/releases/download/v6.3.4/ixgbe-6.3.4.tar.gz root@pve1:~# tar xvpf ixgbe-6.3.4.tar.gz root@pve1:~# cd ixgbe-6.3.4/src/ root@pve1:~/ixgbe-6.3.4/src# apt install...
  • R
    rbt_jared posted the thread Sanity check remote sync seed process in Proxmox Backup: Installation and configuration.
    Hello We have a PBS server that is configured with a connection to a remote PBS server over a VPN with poor bandwidth. I'm trying to get the initial upload to complete but it looks like it will be weeks at the current rates. I will probably need...
  • W
    warlocksyno replied to the thread TrueNAS Storage Plugin.
    Within the cluster itself? If so, I don't think you need the replication feature. Replication is for if you have non-shared storage between the nodes. Such as local storage, like a ZFS pool on each host. You can then use the replication feature...
  • G
    gwdsl posted the thread Compile PBS against 16k page size in Proxmox Backup: Installation and configuration.
    I have a system running a 16k page size kernel. When I try to create or restore a backup it fails with: ... read(10, ... , 4096) = 4096 mmap(NULL, 98000, PROT_READ, MAP_PRIVATE, 10, 0x1000) = -1 EINVAL (Invalid argument) ... write(2, "unable to...
Show older items
Top Bottom
Back