Latest activity
-
Are you sure? Allthough they share the same package format I always assumed that Ubuntu takes Debian ( I think unstable ) as base and customizing it, resulting in xases where binary compatibility is not guranteed any more It's actually quite... -
UdoB replied to the thread Proxmox on HyperV, start VM crash if more than 2815MB of memory.You did not tell us much about your hardware. But this line: calls for: have you run memtest86+? If not: run it over night, at least several hours. At least two or three full "cycles". How much RAM does the system have? Can you start a Linux... -
Cchrisn-au reacted to celemine1gig's post in the thread e1000e eno1: Detected Hardware Unit Hang: with
Like.
See Erratum Nr. 7: https://www.intel.com/content/dam/doc/specification-update/82571eb-82572ei-gbe-controller-spec-update.pdf Just because it uses the "e1000e" driver does not necessarily mean, that it is affected by this bug. You have to... -
IIsThisThingOn reacted to fstrankowski's post in the thread [SOLVED] Extremely low speeds when backuping with Like.
Something is really wrong with your TLS-Speed.
-
IIsThisThingOn replied to the thread Performance Probleme.Das Forum hier ist community support. Für Support vom Proxmox Support Team gibts es das Kundencenter. Dort kann ein Ticket eröffnet werden.
-
pvps1 reacted to _gabriel's post in the thread [SOLVED] Extremely low speeds when backuping with Like.
Run tailscale status and examine the connection information for the peer device. If the output contains "direct", the connection is direct. If the output includes "relay", the connection is relayed through a DERP server. If the output includes...
-
UdoB reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Hi Community! The recently released Ceph 20.2 Tentacle is now available on the Proxmox Ceph test repository for installation or upgrade. Upgrades from Squid to Tentacle: You can find the upgrade how-to here...
-
LLuksus replied to the thread [SOLVED] Extremely low speeds when backuping.That was it. Had fra relay, so I tried playing with forwarding ports and uPnP And got it working at beautiful 10MB/s. Got to work on that, because the maxed out speed is 250Mb/s. Thanks!
-
UdoB reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
-
Ssmelting6988 posted the thread Help needed solving CPU lock up in PVE 8 and now PVE 9 in Proxmox VE: Installation and configuration.This all started last mouth when my server started getting random CPU lockups that would crash/reboot the system. I have tried all of the following with no real solution yet: roll back to older kernal start proxmox with no vm's running, just the...
-
Nns33 reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Hi Community! The recently released Ceph 20.2 Tentacle is now available on the Proxmox Ceph test repository for installation or upgrade. Upgrades from Squid to Tentacle: You can find the upgrade how-to here...
-
Ssaskog replied to the thread Update Installed -- System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!.root@pve1:~# efibootmgr -v BootCurrent: 0011 Timeout: 1 seconds BootOrder: 0000,0011,0001,0003,000D,000E,000F,0010 Boot0000* proxmox HD(2,GPT,643e35a2-91b5-4c16-9085-983ec9a306c8,0x800,0x200000)/File(\EFI\proxmox\shimx64.efi) dp: 04 01...
-
JJohannes S replied to the thread Connect and sync two PVEs drives with PBS.No it doesn't. PBS checksum-based verification, deduplication etc are NOT based on ZFS but their own Implementation as can easily seen by reading the PBS manual. My offsite PBS runs on a vserver with an ext4 datastore. Did you use a...
-
Jjoew replied to the thread Keyboard issue: AltGr seems to hang after typing \).Thanks for your efforts, @mariol ! I am using the web console of proxmox which can be accessed as https://pve.do.main:8006 Isn't this the "default" way to access the VM console? Just to rule out the obvious: you have set up "de_DE nodeadkeys"...
-
JJohannes S reacted to zandhaas's post in the thread SSD Backup mit ddrescue: Dateien wieder zurückspielen? with Like.
Sie haben keine Sicherungskopie Ihrer Home Assistant-Konfiguration/Datenbank? Falls doch, empfiehlt es sich, Ihre Umgebung neu zu konfigurieren, die Home Assistant-VM neu zu erstellen und sie anschließend aus der Sicherung der alten Home...
-
JThis is by design. Technically I suppose 10.10.20.81/24 and 10.10.20.0/24 are equivalent anyway...the /24 mask would refer to .0-.255.
-
JYeah, since the CIDR (/24) marks which part of the IP address defines the network, and which the host, it is easy for Ceph to calculate the network part from the configuration.
-
JJohannes S reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
-
Ssantiagobiali reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
-
Ggusto replied to the thread Very slow creation of LXC (Proxmox 9).I don't like it at all. If I backup LXC (zstd), the size is 250MB. If I do a restore via the web gui, it takes 70 seconds. Something is definitely wrong there. In Proxmox 8, backup and restore were in the order of seconds. Graphs during LXC...
-
