Latest activity
-
Mmuekno replied to the thread Starthilfe für mein Home Server Projekt.Mehr als 2 Kerne, ich sehe 4-8 als Minimum für die Haupt CPU solltest Du minimal haben und natürlich ausreichend RAM für Deine VMs. Fang mal bei M inimum 16GB RAM an, 232 bis 64 GB sind besser wenn Du auch halbe vernünftige Performance haben...
-
KKingneutron reacted to fabian's post in the thread PSA: PVE 9.X iSCSI/iscsiadm upgrade incompatibility with
Like.
yes, I got a GH notification about it but it was too close to the cutoff for the next point release (this weekend) on the Debian side. I will get it included in unstable and then try to get it backported for Debian 13.4 (which will be cut in March). -
mariol replied to the thread Keyboard issue: AltGr seems to hang after typing \).Thank you for your detailed reply. I tested this on three different PHY servers (Intel, Supermicro, HPE ML350G10). I couldn't reproduce it. I used exactly your VM config settings. After I played around with other settings. No luck. I tested bash... -
Mmuekno replied to the thread Starthilfe für mein Home Server Projekt.Deine Partituierung ist offen gesagt Schmarrn. Natürlich stimmt das was was PROXMOX schreibt, das heißt aber nicht dass kein Grundwissen vorhanden sein soll. Du bist auf dem Falschen Weg und mir scheint Du hast Virualisierung. nicht verstanden...
-
AAlongside4550 posted the thread [SOLVED] Mirrored boot pool degraded due to PVE not recognizing one of the drives though lsblk recognizes both the drives. in Proxmox VE: Installation and configuration.I have my PVE boot drive setup as mirrored zfs pool. My boot pool (rpool) is showing as degraded and the "Disks" panel is showing only one NVMe drive while LSBLK is showing both the drives (see output below) . Both these are new drives and same...
-
-
Kkwat replied to the thread [SOLVED] No USB Devices in PVE9.1.1.Since I only used PIC pass through to pass for the one device that is having the problem, I removed all of the pass-through settings and the problem went away. Thank you leestenken
-
DDannyElfman replied to the thread [SOLVED] Update to version 9 - fail systemd-boot.Fixed per : https://forum.proxmox.com/threads/pve-8-to-9-in-place-upgrade.170013/page-3 Reboot and all good :)
-
mariol replied to the thread One Host in Cluster stop allowing authentication.All right. Maybe check the time too on all nodes. There might be a time drift.
-
fireon replied to the thread Windows 2025 UEFI/TPM Clone.Thanks for output. Looks ok. There are two things I would like to optimize: Change virtual harddrivebus from SATA to SCSI Add an RNG Device. A VirtIO RNG device can also improve to better performance. For your issue, I would test @uzumo... -
Llouie1961 replied to the thread About to pull my hair out.You know what they say...the issue is always DNS. LOL
-
LI have the solution! I was finally able to get the update to take and wanted to make sure I posted the results. So the issue was with the gateway. So, everyone was kind of right and kind of wrong. With AT&T Fiber, the gateway isn't 192.168.1.1...
-
AAkore posted the thread Adding NAS storage to Proxmox for Plex Media Server in Proxmox VE: Installation and configuration.I have a very old WD My Cloud that has 4 external drives attached to it along with the internal. I would like to add all this storage into Proxmox so that I can setup Plex Media Server on my NUC7PJY and retire (sell) my Shield TV (NVIDIA...
-
DDedo replied to the thread Nach Neuistallation von V9.1.1 "Die Website ist nicht erreichbar 192.168.XXX.YYY hat die Verbindung abgelehnt..192.168.178.147 also 147 statt 18 (obwohl die auch frei war/ist)
-
Ppcnr posted the thread Slow backup of Proxmox VMs in Proxmox Backup: Installation and configuration.Good evening everyone, I'm sorry to bother but i'm hitting a wall trying to backup Proxmox VMs What I've tried: -HornetSecurity VM Backup with an USB HDD connected as passthrough -> superslow / failing constantly -Standard Proxmox Backup to an...
-
Ppetruzzo replied to the thread [SOLVED] User Permission.Ok thanks now I find the wright path this is the acls and work all now mark as solved
-
Vv3rm1n replied to the thread PBS: proxmox-backup-proxy fails to start due to permission issues on /run/proxmox-backup.arch: amd64 cores: 2 features: keyctl=1 hostname: proxmox-backup-server memory: 2048 net0: name=eth0,bridge=vmbr0,gw=172.16.0.1,hwaddr=BC:24:11:F9:C5:DC,ip=172.16.0.106/16,ip6=auto,type=veth onboot: 1 ostype: debian rootfs...
-
SStefan Radman replied to the thread PVE 6.0-7 + ixgbe firmware errors.Update: PVE 9.1 kernel 6.17.4-2-pve requires ixgbe-6.3.4 or later. With older driver versions you'll run into a build error.
-
news replied to the thread Starthilfe für mein Home Server Projekt.Zur Hardware, habe ich dieses PDF gefunden: https://cdn-reichelt.de/documents/datenblatt/E200/HP_T640_DB-DE.pdf Wenn da eine AMD Ryzen™ R1505G Prozessor verbaut ist, ist das eine Kern CPU, mit seinem 2x 8GB DDR4 2400 MT/s Ram wird noch ca 2 GB... -
SEs sind zwei 12 Core CPUs verbaut. Wenn man einer VM mehr als 12 Cores gibt wird entweder auf beide CPUs verteilt was immer NUMA Delay mit sich bringt, außer man hat eine NUMA Aware Anwendung und vNUMA konfiguriert. Anderenfalls wird Hyperthread...
-
DDedo replied to the thread Nach Neuistallation von V9.1.1 "Die Website ist nicht erreichbar 192.168.XXX.YYY hat die Verbindung abgelehnt..ich habe das System neu installiert und keine feste IP vergeben (die von der Fritzbox vergebene genutzt), jetzt geht es :-) Warum auch immer ??? Danke euch
