Latest activity
-
ZZappy replied to the thread schedule format for sync job.Thanks so much , i must be blind
-
LLuksus posted the thread [SOLVED] Extremely low speeds when backuping in Proxmox VE: Installation and configuration.Hello everyone. Im writing this because I dont know what to do anymore. I installed PBS 2 weeks before and tried doing backup test today. Lets just say that 30 GB took 19 hours. My internet connection is not the problem. The PBS is located...
-
fstrankowski replied to the thread Performance Probleme.Kannst Du bitte einmal einen FIO-Test auf dem PBS machen? Auf das entsprechende Datastore: fio --name=seq_write_4m --ioengine=libaio --direct=1 --invalidate=1 \ --rw=write --bs=4m --iodepth=16 --numjobs=1 \ --time_based --runtime=120... -
Ssmalchow replied to the thread proxmox-firewall (nftables) and conntrack.Hi, thanks for the reply, ok i am testing on one machine, if it is on one PVE server, i execute nft list ruleset | grep -i mark i can see 2 entries with ct mark set both with the same number behind it and some entries with source and destination...
-
Ssmithj33 replied to the thread apparmor denies dhclient socket.Yes, the only line in that file is abi <abi/3.0>, You can reload apparmor, but I would reboot if it seems to not be doing anything. Not sure what you are using for a router, but you may have a short lease time set which is causing proxmox to...
-
Es sind zwei 12 Core CPUs verbaut. Wenn man einer VM mehr als 12 Cores gibt wird entweder auf beide CPUs verteilt was immer NUMA Delay mit sich bringt, außer man hat eine NUMA Aware Anwendung und vNUMA konfiguriert. Anderenfalls wird Hyperthread... -
Ddrwadu replied to the thread PVE landlock support.the best answer I can give is that stacking LSMs (such as apparmor and landlock) is in theory supported but might not work well in practice
-
Xxsuau replied to the thread Connect and sync two PVEs drives with PBS.First all, sorry for the late reply. I see what you mean. We could add external storage in case the cluster is compromised, and we will do so now. With this improvement, we would have three copies of the VM in two separate systems, with one of...
-
SSchwielowNET replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Many thanks for your reply. The good news: "the 6.17.4-2 kernel will probably be moved to enterprise today or on Monday", so we can change back to enterprise-repo. Especially since this kernel also runs on the PVEs, and I have little confidence...
-
Mmetaltech replied to the thread Testing NUT configuration, VM's don't restart on boot up..Thanks that solved the problem, you'd think I would have known better as I've use Linux for a good while.
-
Ggmtech replied to the thread Kernel panic after first upgrade.Looks like an issue with ESXi v7.0. I will go another route as that host will be replaced in 2 months with a new one. Thank you very much for all of the help.
-
NNerion replied to the thread Performance Probleme.Hier die RAID Config CLI Version = 008.0013.0000.0007 Mar 13, 2025 Operating system = Linux6.17.2-1-pve Controller = 1 Status = Success Description = None /c1/v1 : ====== --------------------------------------------------------------------...
-
Ccelemine1gig replied to the thread e1000e eno1: Detected Hardware Unit Hang:.See Erratum Nr. 7: https://www.intel.com/content/dam/doc/specification-update/82571eb-82572ei-gbe-controller-spec-update.pdf Just because it uses the "e1000e" driver does not necessarily mean, that it is affected by this bug. You have to...
-
fstrankowski replied to the thread Performance Probleme.Da kenne ich mich leider nicht so gut aus, vielleicht finden sich ja hier andere, welche mit Dell HW Raid Controllern mehr Erfahrung haben. Ich denke jedoch, dass die Richtung schon zielführend sein kann, das würde alle bisherigen Erklärungen...
-
NNerion replied to the thread Performance Probleme.Habe jetzt gerade die VM auf einen leeren PVE Knoten migriert und das Backup gestartet. Hier die Ausgabe von iostat und dem anderen Befehl: avg-cpu: %user %nice %system %iowait %steal %idle 0.06 0.00 0.04 0.00 0.00...
-
Ttenstareri posted the thread Tips on core assignment to VMs in Proxmox VE: Installation and configuration.The hardware in question is * AMD Ryzen 9 7950X3D 16-Core Processor * 128GB RAM * 3 Windows VMs Each VM compiles code so they can technically make use of all assigned cores when needed. Sometimes all 3 are in use at the same time, though it is...
-
Wenn die Einstellungen auf dem Controller bescheiden sind, leidet zuerst die I/O Performance (kleine Chunks) aber der Durchsatz bei großen Full Stripe Writes ist OK.
-
Falk R. replied to the thread Performance Probleme.Wenn die Einstellungen auf dem Controller bescheiden sind, leidet zuerst die I/O Performance (kleine Chunks) aber der Durchsatz bei großen Full Stripe Writes ist OK. -
Würde in diesem Fall aber nicht erklären, warum eine Filecopy bei ihm mit mehreren GB/s läuft, das Backup aber nicht. Idee: Vielleicht schon: Das Backup wird in Chunks geschrieben, die Filecopy ist eine Datei. Vllt in diese Richtung denken?
-
fstrankowski replied to the thread Performance Probleme.Ich denke gerade in die Richtung Chunks vs eine Datei. Das eine sind viele kleine "Dateien", das andere eine große Blob. Vllt hat das Storage damit Probleme? Und gib bitte mal euren "Backup-Befehl".
