Latest activity
-
Mmyssv replied to the thread Proxmox stürzt regelmäßig ab.by the way IPv4: martian source 192.168.115.255 from 192.168.115.88, on dev fwbr113i0 192.168.115.88 ist mein Roborock Staubsauger.
-
NNerion replied to the thread Performance Probleme.Im Moment läuft ein Backup von einer VM auf einen Backup Knoten. Also nur 1 zu 1 und der PBS schafft gerade mal 1Gbit/s.
-
Mmyssv replied to the thread Proxmox stürzt regelmäßig ab.Es ist wieder passiert ... Hier die Ausgabe von journalctl -b -1 -e [root@pve04 ~]# journalctl -b -1 -e Jan 05 13:41:44 pve04 kernel: IPv4: martian source 255.255.255.255 from 192.168.115.254, on dev fwbr122i0 Jan 05 13:41:44 pve04 kernel: ll...
-
MMister X replied to the thread [SOLVED] Nicht mehr referenzierte Festplatten.;-) Danke! Ich denke, ich bin aber gerade auf die eigentliche Lösung gestoßen. Die beiden Haken habe ich bisher immer gesetzt, aber deine beiden Links haben mich auf den richtigen Weg gebracht. Im PBS unter Datastore --> Content finde ich in der...
-
MMister X replied to the thread [SOLVED] Nicht mehr referenzierte Festplatten.Entschuldigung, ich meinte natürlich virtuelle Platten. Daher ging ich auch davon aus, dass der oben genannte Befehl nicht korrekt ist.
-
AArtsiom posted the thread Thin Pool `vg_hdd-data-tpool` stuck with open count 1, preventing volume deactivation and reboot in Proxmox VE: Installation and configuration.Hello Proxmox community, I’m experiencing a problem with one of my LVM thin pools (`vg_hdd-data-tpool`) on my Proxmox server. Despite stopping all VMs and containers using the `vg_hdd` volume group and unmounting all related logical volumes, the...
-
MMister X posted the thread [SOLVED] Nicht mehr referenzierte Festplatten in Proxmox VE (Deutsch/German).Hallo, ich habe heute leider etwas spät im Proxmox Backup Server festgestellt, dass dort noch eine VM gesichert wird, die ich vor einem halben Jahr gelöscht habe. Im Forum habe ich gelesen, dass ich über die Shell mit ls -l /dev/disk/by-id/ mir...
-
Rrobertlukan replied to the thread Server 2022 defrag/trim pegging CPU and RAM.If this is a known issue for VM Server 2022+, I guess it might be a good idea to include this in the default profile setting when selecting Windows Server 2022+ while creating a VM ? Personally, I have not came across this issue, as I ran only...
-
NNerion replied to the thread Performance Probleme.Was genau soll ich mir hier anschauen, was genau meinst du?
-
spirit replied to the thread [SOLVED] Understanding VM backups and behavior on ZFS.a difference with snapshot mode is that the qemu agent is doing a fs-freeze/fs-thawt before the backup, so maybe you can try to disable this ? (they are an vm config option in vm guest agent config). also, not sure that it could help, if you... -
Falk R. replied to the thread Performance Probleme.Nicht vergessen, 40% sind nicht gleich 40%. Bei Terminalserver Farmen wäre das eher wenig ausgelastet. Bei normalen APP Servern eher extrem ausgelastet. Schau dir mal den CPU Pressure und I/O Pressure während des Backups an. -
Bbegeis replied to the thread change network card.Thank you very much for your helping lines. I changed the file /etc/network/interfaces as described by you and it worked. Perfect! The new network device is a 2.5G LAN-Adapter ... not WLAN as expected by others. Thank you!
-
-
NNerion replied to the thread Performance Probleme.Also wir können nicht in Produktivumgebungen einfach mal VMs ausschalten. Da das Problem aber global über alle PVE-Nodes und alle Backup Knoten nahezu identisch ist, liegt hier vermutlich nicht das Problem. Zudem ist es normal, dass Produktive...
-
Pphip replied to the thread [SOLVED] Understanding VM backups and behavior on ZFS.I let the backup run in Suspend mode, with fleecing enabled and it was in the 6th iteration when I manually aborted it to test further. So this mode does not seem to trigger the issue for some reason. I then switched back to Snapshot mode and it...
-
Ffl0moto replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.Hi Tomm, in order to use .8.200 via the SFP module, you need to edit bridge vmbr0. Remove the RJ45 port and replace it with the enp100s...np0 SFP. Not sure if it's required, but to get rid of the .253 IP, remove it from enp100s...np0. The...
-
VictorSTS replied to the thread HA Migration issues when VM has local storage.Sorry for that, but It seems you didn’t understand my point either. No need to convince me about anything: use bugzilla to explain your use case to the devs so they can decide what should be improved. I know how PVE's HA works, it's ok for me... -
TTomm replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.@bbgeek17 I want to switch completely from ethernet to SFP but this setting was just for testing the interface. When I installed Proxmox, I had to give the ethernet interface its IP address in my case 192.168.8.200/24. In the Proxmox GUI and...
-
-
Cchrisn-au replied to the thread e1000e eno1: Detected Hardware Unit Hang:.I have just asked Claude The reply was Yes, almost certainly. Based on the Intel PRO/1000 PT Desktop Adapter identification, the chip under that heatsink is the Intel 82572GI controller, which uses the e1000e driver on Linux. To confirm, if you...
-
RRussell Ault replied to the thread [SOLVED] "Error '0' occured while receiving the doument" when uploading an iso as pve user.I just ran into this issue myself, and your post pointed me in the correct direction: when mounting a new file system on a directory, the mounted file system's root permissions override the permissions previously set on the directory being...
-
dcsapak replied to the thread PDM - how manage Users permissions on different clusters ?.well you can give a pdm user privileges to specific things on the pve remotes so he'll only see (and can interact with) those. It does not give automatic privileges to the pve cluster itself, since the pdm user is not automatically logged in to pve
