Latest activity
-
Falk R. replied to the thread Geringe Lese-Performance mit iSCSI und Dell ME5.Pack bitte mal die Ergebnisse in Code Blöcke, das hilft beim lesen. Wenn die so verschieden sind, solltest du das Netzwerk vom „Bösen“ noch einmal checken. Jumbo Frames überall korrekt konfiguriert? Fehler auf Ports? -
Ddgsnb reacted to fossaaen's post in the thread [SOLVED] Temp and random VM freeze after upgrade to Proxmox 8.2 with
Like.
After much debugging/digging, we finally solved our problem. When VMs hang, we saw that file ‘/proc/<kvm-pid>/environ’ on hypervisors was not possible to cat/read when VM hangs, OK when VM did not hang - all other files in /proc/<kvm-pid>/ was... -
Sseko replied to the thread vm 7.4 to 9.1 migrate.Thanks for your suggestion. The 9.1 cluster is currently empty, and what we actually want to do is move everything from the 7.4 cluster to the 9.1 cluster, then delete the 7.4 one and fully switch to 9.1. I already know that the VMs will work...
-
Ddung.pm replied to the thread Proxmox VE 9.1.1 – Windows Server / SQL Server issues.Enable Ballooning can give you fix the UI problem on Proxmox (100% memory). But i heard that enable it will make the SQL server buggy ( slow, lag,etc..)
-
ZZolt reacted to fabian's post in the thread [SOLVED] PVE 9 - GRUB stops the machine immediately with Like.
could you post the output of pve8to9 as well as "proxmox-boot-tool status" and "efibootmgr -v" for the third node, *before doing the upgrade*? thanks!
-
XXoxxoxuatl replied to the thread Geringe Lese-Performance mit iSCSI und Dell ME5.Moin, in der ME sind SSDs verbaut. Hab die LUN an einen weiteren Server gehängt und dort läuft es besser, daher würde ich das Storage ausschließen? Bin dann Gestern noch die Configs und Ports durch konnte aber nichts finden. Böser Server...
-
Oovaloffend replied to the thread Convert BIOS (Legacy Boot) Proxmox PVE Host (VM) to UEFI Boot.you can’t reliably convert a Proxmox VE system disk from legacy BIOS to UEFI when it’s running as a guest VM the way you describe — especially with ZFS root — and the error you’re seeing is expected. Key points you can reply with...
-
Wwarheat1990 replied to the thread e1000e eno1: Detected Hardware Unit Hang:.Anyone know if the card below is affected by this bug? I have one laying around but not sure about the model, it says Intel PRO
-
-
BThanks for your reply , my problem solved here's how : 1st step: increase/resize disque from GUI console 2nd step : Extend physical drive partition check free space : $sudo fdisk -l $growpart /dev/sda 3 (Extend physical drive partition...
-
Mmauriceklein posted the thread Feedback routed L3 routing without bridge in Proxmox VE: Networking and Firewall.Hello there, I've been working on a proof of concept on a testserver of mine for Networking without any bridges, just with tap interfaces. Qemu does allow you to run vms without any bridge, only creating a tap interface on the system but it is...
-
Ttigro11 replied to the thread Proxmox VE 9.1.1 – Windows Server / SQL Server issues.can i convert to Lvmthin without moving all the vms?
-
Ttigro11 replied to the thread Proxmox VE 9.1.1 – Windows Server / SQL Server issues.Why do you say the drives need to be replaced? They're SATA SSD drives. I don't think that's the problem, at least I hope so.
-
Ggogito posted the thread Epyc 7003 CCX L3 as 8 NUMA configuration in Proxmox VE: Installation and configuration.So after scouring through all previous forum posts, I still can't seem to find a clear answer on how Proxmox actually deal with Numa nodes. My setup Epyc 7663 56c112t (yes it might be a bit unoptimal, I will try to switch to a 7b13 with full...
-
-
DDerekG replied to the thread CT backup to PBS - Excess data causing very long backup window.For anyone else following this, I think I've got to the root of the problem. The issue is application specific, in that the CT app generates a 2.TB sparse file found by running the following command run inside the container: ~# find / -xdev...
-
Ppongomongo replied to the thread Proxmox Setup for New User.Report update - I tried both. Answers to my own questions posted here for future strugglers. 1. Yes, setting the Proxmox gateway to my network gateway (router ip address) was the correct thing to do. 2. Using an IP address within my lan DHCP...
-
Ooldprox replied to the thread HA Migration issues when VM has local storage.Then with all due respect, either you have misread my post picking a point I didn't even make, or have the same attitude problem that I did make a point of. Not working without shared storage is fine (although HA with replication is a common...
-
FfeliceM posted the thread Migrating SeaBIOS VMs from Legacy Proxmox node to UEFI Proxmox node – any issues? in Proxmox VE: Installation and configuration.I have an existing Proxmox 9.x node installed in Legacy BIOS mode. The VMs on this node were created with SeaBIOS and are currently running fine. I am preparing a second server where Proxmox 9.x has been installed in UEFI mode. I would like to...
-
Ooldprox reacted to UdoB's post in the thread HA Migration issues when VM has local storage with Like.
I would be satisfied if there would be a "pve-cluster-sanity-check"-script which I could run from time to time, be it manually or via cron. It would work like the well done pve8to9 and check for some correct configuration settings. For example...
-
DDLinkOZ replied to the thread 8 node cluster, all went offline at the same time.Rebooting always shows this type of error:
-
-
Ppugglewuggle replied to the thread Convert BIOS (Legacy Boot) Proxmox PVE Host (VM) to UEFI Boot.Anyone?
