Latest activity
-
Aahadeee replied to the thread Memory Usages.At first i created VM in windows 10 and installed office 365 ,then created template .After that I have full clone from that template where memory allocation 32GB,nevertheless the memory uses illustration 28GB which is alarming.Would you able to...
-
Ccrazywolf13 reacted to leesteken's post in the thread GPU Passthrough not respecting secondary GPU with
Like.
No, the iommugroup column shows group 1 for both. Try a different PCIe slot for one or both (as there might be more devices in group 1). -
Ccrazywolf13 replied to the thread GPU Passthrough not respecting secondary GPU.That seems to explain this: So that would mean it's not possible to have one GPU for the host and one for a VM? ├───────┼──────┼──────────┼─────────┼──────┼───────────────────────────────────────────────────── │ 0x030000 │ 0x1b80 │ 0000:01:00.0...
-
LLG-ITI replied to the thread [SOLVED] External Storage Server for 2 Node Cluster.Thank you for the replies! I guess I misunderstood how ZFS over iSCSI actually functions. In the Future, I will probably only use the Linux Storage Server for non-critical VMs so I'm fine with it being a single point of failure.
-
JJohannes S replied to the thread /run/pve ??.I don't get what you are trying to achieve. Some people might consider fixing broken clusters entertainment, I'm not one of them. So: What are you trying to achieve with your cluster if most of the times the remaining nodes are offline? If you...
-
Ccrazywolf13 replied to the thread GPU Passthrough not respecting secondary GPU.I don't think I've ever touched any files manually other than the ones I showed above: root@tower8:~# for f in /etc/modprobe.d/*; do echo "===== $f =====" cat "$f" echo done ===== /etc/modprobe.d/blacklist.conf ===== blacklist radeon...
-
weehooey-cd replied to the thread Memory Usages.Good morning ahadeee, Forgive me for not having a direct answer for you, but I wonder if we could know a little bit about some of the specifics of what is running on this possibly Win10 instance? You mentioned Office products. Is it perhaps a... -
FFrankList80 replied to the thread Umstieg von Synology auf Proxmox - Verständnisfrage.Subjektive 2-cent // Apologies - aus vielen jahren "Schmerz und Tränen" kann ich nur davon abraten Storage und Compute auf einem Stück-Hardware zu betreiben. Mein Tipp: HW-Refresh des "Filers" (z.B. X86 mit OMV und 2tes Netzteil auf Cold Standby)...
-
AAbby2017 replied to the thread 2 Note Cluster und PBS.Danke für den Tipp!
-
Aaah replied to the thread eingehende E-Mails blockieren.Ich habe den Eintrag auf 97 geändert, aber ist immer noch die selbe. In Tracking sehe ich auch acceepted/delivered
-
Ttheflakes replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.I had the same issues with backups after upgrading to PBS 4.1. I reverted to the 6.11.11-2-pve kernel that was previously used and backups work fine again. I didn't want to upgrade to 6.17.4-2-pve as on my home lab my Proxmox box crashed after a...
-
Bboexler posted the thread Umstieg von Synology auf Proxmox - Verständnisfrage in Proxmox VE (Deutsch/German).Hallo miteinander, nach rund 6 Jahren darf meine DS918+ (16GB RAM / 4x12TB HDD / 2x1TB SSD Cache) nun in den Ruhestand und soll durch einen etwas professionelleren Server ersetzt werden: be quiet! Straight Power 12 1200W ATX 3.1 ASUS Pro WS...
-
Xxsuau replied to the thread Connect and sync two PVEs drives with PBS.What do you mean? Are you referring to having the two datastores on the PBS? If so, I haven't been able to connect the remote disks to the PBS. I've tried using an NFS mount point, but that doesn't seem to work either.
-
Rrabbit6984 replied to the thread Solved - LXC Container blockieren eingehende Verbindungen.PROBLEM GELÖST. Warum auch immer waren einfach die Dienste nicht mehr online im container Schande über mein Haupt. Jetzt läuft es wieder
-
Xxsuau replied to the thread Connect and sync two PVEs drives with PBS.Hi I may have explained myself wrongly, as English is not my first language. I apologize. I will try to rephrase: We do have a 3-node cluster where two are identical production nodes with two different ZFS-RAIDZ disks (one for each server). The...
-
Nniekniek89 replied to the thread Detected Hardware Unit Hang.Thanks for your help and quick response! What's the easiest/fastest thing to do right now? Make the change in "nano /etc/network/interfaces"?
-
fireon replied to the thread setting to trigger VM power cycle when guest OS reboots?.Very good idea! @mskfm Another option would be to develop access via the Proxmox API. This would allow you to trigger specific commands. It is more work, of course. But it is future-proof. -
AIn my proxmox environment-the linux vm memory use is normal whereas my windows vm memory usages is too high in spite of basic os and office application. Anyone provide solution regarding this issue.
-
-
SSneedsFeedAndSeed replied to the thread Detected Hardware Unit Hang.This is a common problem for these nics. While yours should be fine with tso/gro/gso off, often the recommended solution is do disable all offloading features. Probably overkill, but it's worth a shot. ethtool -K eno1 gso off gro off tso off tx...
-
Pphip replied to the thread [SOLVED] Understanding VM backups and behavior on ZFS.Thanks for the quick response, Aaron! Absolutely clear, I see why it would become slow. But I don't see how this could lead to a permanently broken process inside the VM. I would fully understand if the DB replication would just slow down and...
